24g kanthal

[cloudchaserSV]

Okay guys another question. How do I make a 24g kanthal coil ohm out below .3??

 

[classwife]

Moved to Rebuildable Atomizer Systems - Coil Builds from Simple Solutions



Per the stickies for this forum, Simple Solutions is to assist the Beginning Vaper

 

[RWClark]

4 wraps on a 5/64 mandrel.

 

[eyerhere]

You really should download a calculator. If you have an android get vapers toolbox from google play store. Its free and good you can fiddle all kinds of builds to figure what you want

 

[SLIPPY_EEL]

heres a calculator in my sig, just click on it, then add to your bookmarks, no download needed but is always there.

3full wrap 7/64

4full " " 1/16

 

[cloudchaserSV]

You really should download a calculator. If you have an android get vapers toolbox from google play store. Its free and good you can fiddle all kinds of builds to figure what you want

Can you calculate parallel builds on it?

 

[G-weezy]

Dual 4/5 wrap on a 1/8th drill bit. Should be around .28

 

[morebass]

i like 6 wraps around a 3/32" bit - 0.22 ohm with duals or 7 wraps around a 5/64" bit - 0.25 ohm with duals, both good vapes on a mech but I lean to the 7 wrap

 

[morebass]

Can you calculate parallel builds on it?

should be roughly half, but you would really need a ohm meter to make sure the posts/wires are making good contact