25.00 Smokless owl Squonker

[Visus]

So happy I didn't buy that, I was hovering on the buy button decided against cause no true need lol..

Glad you got it sorted..

 

[thetrucker]

Thx I was never really satisfied with the pin coming down and touching the top of the battery when you press the firing button.

I kept getting nothing and got disgusted but now it is a joy to fire it.

 

[thetrucker]

The button fires now with a nice pressure and after looking at the switch it seemed to be made for the button hole in the top of the Owl.

 

[Lessifer]

The button fires now with a nice pressure and after looking at the switch it seemed to be made for the button hole in the top of the Owl.

I almost never get a misfire since I switched to the "trigger" hold, firing with my index finger. Glad you were able to set it up how you like it though! 18350's wouldn't supply enough vape time for the way I like it. I ordered a CREO though, will just have to see about cutting down the catch cup to get a 22mm atty on it.

 

[KYBLUE]

thetrucker, you are possessed with the tinkerer's spirit. I bet as a kid your toys were either awesome or broken, dependent upon the success or failure of your latest modification or repair.

I enjoy your MacGuyveresque 'look around the room for materials and make something work' creations.

VAPE ON

 

[thetrucker]

I was all against the 18350 batteries at first but was really surprised when I tried one in my Fury-s mod.

This little battery lasts me a good 6 hours !!! With a 1.25 or higher coil it seems to keep going all day.

 

[thetrucker]

thetrucker, you are possessed with the tinkerer's spirit. I bet as a kid your toys were either awesome or broken, dependent upon the success or failure of your latest modification or repair.

I enjoy your MacGuyveresque 'look around the room for materials and make something work' creations.

VAPE ON

@KYBLUE

Thanks----I love to find local materials from Hardware Store or an old burned out appliance---and use these easy to get items----rather than just ordering parts

from Fastech China-----------------Once I painted a 72 Cadillac Eldorado brown vinal top white with a paint brush and Used tape to make diamond shaped opera windows---turned out

really nice.--------Impressed a girl with my fancy car and got married----that was 35 years ago and still have her-----hahahahahahah

 

[DingerCPA]

Oooooh, Ooooh, oooooh, ooooh

IT'S HERE!!!!!! My Velocities arrived today!!!!!!!!!

I'm in HEAVEN!!!!!!!

This has been by far the easiest RDA on which to build. I love the posts; I love that I swapped out the standard pin for the bottom feed pin.....

Happy

 

[Lessifer]

Oooooh, Ooooh, oooooh, ooooh

IT'S HERE!!!!!! My Velocities arrived today!!!!!!!!!

I'm in HEAVEN!!!!!!!

This has been by far the easiest RDA on which to build. I love the posts; I love that I swapped out the standard pin for the bottom feed pin.....

Happy

Open her up and show us the build Mine arrived yesterday.

 

[thetrucker]

@DingerCPA -------it looks great being white on top of the White Snowy Owl---great choice!!!!!!!!

I have been running my Smok Rebuildable RDA and M4 tiny atomizers at 1.25 ohms lately and getting good results......

I call the Smok Dripper---my milk bottle......

 

[DingerCPA]

7 wraps, 28g 3mm each coil. Rings out to 0.88

 

[DingerCPA]

Sorry it's a bit fuzzy.... I got a 2nd one - Stainless. I recently won the Beyond Vapes contest, and I'm to be receiving a copper Beyond Vapes Sage V2 mech mod. I think the white will look killer on that.

I like this so much, I may have to grab a couple more (even though it took for-freaking-ever to get here!)

I got the option with the bottom feed pin - easy-peasy to change out (and a heckofalot easier than trying to dremel a center pin!!!)

Lessifer - build your bad-boy up and let us see!

 

[thetrucker]

Hi DingerCPA---that looks like a cloud and flavor chaser/producer to me...........

Nice Job on the build--------------------that looks like it would be easier to build on than some of the tiny tiny decks.....

 

[DingerCPA]

@thetrucker - I have stubby fingers (certainly not girly - I'm so built like my Father ) Yes, LOTS of room with which to work. I talked to a fellow last weekend at Vape in the Fort, and he recommended "offsetting" the coils - one leg in the top on one side; other leg in the bottom and then cross it on the opposite side. The grub/set screws come in from the sides, and the holes in the posts are pretty big. So, if I ever do something crazier than single-strand wire, should be quite easy to do.

$10 from focalecig.... {hint, hint}

 

[thetrucker]

Also before I forget............Congratulations on winning the contest and looking forward to seeing your new mod and atomizers.!!!!!!!!!

 

[DingerCPA]

OH, and it comes with a wide-bore driptip as well as a 510 driptip adapter. The tip I have on there is a measly ol' 510 tip, but I'm getting so much airflow, I think I'd pass out from the wide-bore!

ETA - Thank You

 

[thetrucker]

@DingerCPA @Lessifer

Just got home from Local B and M-----just bought a white Velocity as I liked DingerCPA's atomizer so much....and have it on the Owl

Easy to build on really nice air flow. Modded it for bottom feed as it did not have.....

Took my green led lite from my DeadModz atomizer and installed it in the Velocity----a little to brite.....

 

[Lessifer]

@DingerCPA @Lessifer

Just got home from Local B and M-----just bought a white Velocity as I liked DingerCPA's atomizer so much....and have it on the Owl

Easy to build on really nice air flow. Modded it for bottom feed as it did not have.....

Took my green led lite from my DeadModz atomizer and installed it in the Velocity----a little to brite.....View attachment 487711 View attachment 487712 View attachment 487713

How do you like the velocity? I haven't been using mine much since I got it, I've been running the chalice on the cREO because I've been too busy to mess around with stuff. Looking forward to getting back to experimenting with the velocity though. I just need to find my files so i can LP the cREO.

 

[DingerCPA]

@DingerCPA @Lessifer

Just got home from Local B and M-----just bought a white Velocity as I liked DingerCPA's atomizer so much....and have it on the Owl

Easy to build on really nice air flow. Modded it for bottom feed as it did not have.....

Took my green led lite from my DeadModz atomizer and installed it in the Velocity----a little to brite.....View attachment 487711 View attachment 487712 View attachment 487713

Ha ha ha - that's AWESOME!

@Lessifer - I am LOVING my Velocities. I have very simple builds in mine. One's about 0.9 with 28g/3mm dual coils; the other is about 0.8, same wire, same ID. The Velocity is a breeze to build. I think next time, I'm going to shoot for about 1.2-1.5 ohms, so I can run on a new mech I'm hoping to get this week.

 

[thetrucker]

@Lessifer ------I like the velocity---- have a single coil for now and it is running good and not draining my 18350 battery very fast..... Can you post a pic of

your REOS/c with the chalice on it?.........I am totally convinced that I must run my Smok Tiny Dripper in a reos/c