3 out of 6 Kanger T3 won't thread on recommended adapter

[Irishred]

I have a provari and so far I really like the Kanger T3 with ego T 510 adapter. My problem is 3 of the brand new T3s won't thread on either two adapters. They're not really that expensive but with shipping can add up. Is there anything I can do to fix the problem like threading glue or something like that?

 

[crxess]

Did you buy the Adapter Provari sells? It is by far one of the best machined adapter on the market.

Have you tested the Kangers on an ego battery? Do they all thread on?
Just asking because I have about 30 kangers and no issues.

 

[Irishred]

I brought the adapters from Provape. Like I said 3 out of 6 T3 would not thread on. I only have the two provari. Do you know if the threading glue sold by provape will solve the problem?

 

[crxess]

If you are referring to Noalox then No, it is not a glue. Noalox is for the threads on the battery end cap to prevent seizing.

Is this the adapter you purchased?
Ego-T Adapter

This is the Only adapter to use for Ego/510 threaded devices. If one Kanger will fit, all will fit.

 

[djtonyb]

Actually, I had problems with my T3... I got an iTaste MVP with the eGo threading. The T3 worked great on it, until I screwed in a replacement head... the replacement heads won't fire on my MVP unless I use a 510-eGo adapter, but the original head that shipped with the T3 works just fine. Try a different adapter and see if it works.

 

[crxess]

T3 pin si flat and has issues on several APV's. Slightly pulling the pin down allows it to work fine.