Authentic VOOPOO Rimfire 30mm RTA
Features
Gold-plated 510 pin;
510 threading connection;
30mm overall diameter;
Resin 810 drip tip;
5ml juice capacity;
Glass tube;
Detachable structure for easy cleaning;
Trendy & functional design;
Dual tight airflows/dual full-wrapping airflows;
Center(air down): air goes down directly from tip to coils;
Side(air up):air travels through two side cavities before getting up into the build deck;
Both single and double coils are supported: full-size build deck is easy to build with all kinds of coils;
Well-designed for assembly/disassembly;
Left hand thread is designed ONLY for the chamber, to prevent the misoperation in assembling/disassembling in one direction;
Compared to threading cap, clip-on top cap is much easier;
Building procedure:
Open up the screws
Cut the coil lead, make sure the coil lead has 1cm length
Install the coil vertically, and tighten the screws
Adjust your coil right into the airflow hole
Fire up the coil make it heating at the same time
Wick the cotton, cut the cotton tail make it only has 1cm length
Drip some juice and screw the whole atomizer
Gold-plated 510 pin;
510 threading connection;
30mm overall diameter;
Resin 810 drip tip;
5ml juice capacity;
Glass tube;
Detachable structure for easy cleaning;
Trendy & functional design;
Dual tight airflows/dual full-wrapping airflows;
Center(air down): air goes down directly from tip to coils;
Side(air up):air travels through two side cavities before getting up into the build deck;
Both single and double coils are supported: full-size build deck is easy to build with all kinds of coils;
Well-designed for assembly/disassembly;
Left hand thread is designed ONLY for the chamber, to prevent the misoperation in assembling/disassembling in one direction;
Compared to threading cap, clip-on top cap is much easier;
Building procedure:
Open up the screws
Cut the coil lead, make sure the coil lead has 1cm length
Install the coil vertically, and tighten the screws
Adjust your coil right into the airflow hole
Fire up the coil make it heating at the same time
Wick the cotton, cut the cotton tail make it only has 1cm length
Drip some juice and screw the whole atomizer
