3D?

[caged]

I was thinking about picking up a 3D clone. How well do they vape? Are all 3D clones the same or is there a specific brand I should look for?

 

[bsoplinger]

I love the 3D offered by fasttech on my Nemeses. You'll need to buy the 510 adapter separately if you want one but at least they offer it now, they didn't initially. Other brands come with the adapter.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[caged]

Which 3D on Fasttech did you get? How were the air holes?

 

[Marc411]

I have one for my Nemisis too. Funky little dripper if you can call it that....hybrid

I use twisted 28 and the stock airholes and it vapes real nice. I do have the 510 connection but it sits in the drawer since I have a Nemi

 

[twgbonehead]

FT now sells it all-in-one with the 510 adapter. (Also another one with the adapter+drip tip). Just got mine yesterday (without the 510 adapter) and ordered an adapter separately. Shoulda been a bit more patient... Haven't had a chance to try it out yet though...

https://www.fasttech.com/products/1411/10005773/1716606-3d-rda-rebuildable-dripping-atomizer

 

[bsoplinger]

Which 3D on Fasttech did you get? How were the air holes?

Brushed version:
https://www.fasttech.com/products/1411/10005773/1651001

I keep moving between the smallest and middle sized airholes so they're big enough for me, but I do 1+ builds, don't sub-ohm.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[caged]

Is there actually any difference between the various clones? A local vape shop is selling a CiGreen 3D Hybrid clone for $50, but if there is no difference between it and the clones on Fasttech I don't see why I would want to pay over 3 times Fasttech's price to pick it up locally. I certainly believe in supporting my local shops, but I don't believe in getting gouged.

 

[shroomalistic]

I bought the hcigar version off ebay. comes with the 510 adapter. Im using dual coil 1 ohm build with cotton. Works great but does get a little sloppy with the juice every now and then. All my other atomizers are put away now except for my kraken.

 

[bsoplinger]

Is there actually any difference between the various clones? A local vape shop is selling a CiGreen 3D Hybrid clone for $50, but if there is no difference between it and the clones on Fasttech I don't see why I would want to pay over 3 times Fasttech's price to pick it up locally. I certainly believe in supporting my local shops, but I don't believe in getting gouged.

As with all things of Chinese manufacturer, it all depends. Since quality control is hit or miss and you can get an awful individual piece from a company known for producing good items and a completely acceptable one from a run that had issues, I'd suggest waiting and ordering from FastTech. In this case at least they all seem to be of decent quality. And under $20 (if you choose to get the 510 adapter and drip tip) vs $50 is an extreme local business get it now premium.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[shroomalistic]

Hcigar 3D Rebuildable Dripping Atomizer RBA RDA Stainless Steel Highest Quality | eBay

27 bucks isnt bad for local.

 

[vapero]

I got the first brushed on fasttech and it is an amazing dripper flavor and vapor are perfect and it hold a lot of juice

 

[caged]

I keep reading about issues with air holes (not enough air and/or bad placement). How do I know which clones have this issue sorted out?

 

[ADLinATL]

I got the one by Infinite. Infinite makes good stuff from what I've read and I paid 26.50 shipped on a group buy at congrevape. It has the adapter as well. You can find it for $27 at fluidvapes. I've only tried one build on it so far. I used a single coil because it has bigger airflow. If you use dual coil it only lets you put it on the smallest air holes and they are pretty tiny. It vapes pretty good.

 

[weinner]

I've used the Infinite one and there's no complaints other than it is what it is.

 

[caged]

I got the one by Infinite. Infinite makes good stuff from what I've read and I paid 26.50 shipped on a group buy at congrevape. It has the adapter as well. You can find it for $27 at fluidvapes. I've only tried one build on it so far. I used a single coil because it has bigger airflow. If you use dual coil it only lets you put it on the smallest air holes and they are pretty tiny. It vapes pretty good.

That kind of air hole issue is exactly what I want to avoid.

 

[weinner]

That kind of air hole issue is exactly what I want to avoid.

You can't avoid that with this atty

 

[gratefulbuddy]

I have three "different" clones - one from vapingtech, one from congrevape and one from FT. As I discussed in an earlier thread - the one from vaping tech has the afc ring crimped onto the top cap with no way to remove it that I can see. The other two have the afc ring that can be removed but is secured underneath by orings. IMO, the versions with the removable afc ring are superior as this feature makes it possible to drill out the holes and still have the ring spin on the top cap for adjustments. The only other difference i can see between the three is the horrible logos on the ft unit.
I love them all - 3D and quasar are the top rdas in my stable now.

 

[caged]

You can't avoid that with this atty

So there is a general design flaw then?

Also, I am extremely tempted to pick this one up. The company is like a Fasttech start up but with a warehouse in the USA. I am going to assume the AFC ring does not come off since there is no picture with it off.

3D RDA Rebuidable Dripping Atomizer Clone By Angel

 

[bsoplinger]

The one from Angel seems to have the wrong thread size to allow it to hybrid with the Nemesis. Otherwise it seems OK.

Sent from my Nexus 7 using Xparent Purple Tapatalk 2

 

[nelsonm64]

I own the Hcigar version. I bought it in a group buy, with NO logo and it came with driptip and 510 adapter. the build quality and finish is spot on! lovin' the crap out of it