4ml and 7ml Tube Tanks now available from VolcanoEcigs

[JoeInferno]

http://www.volcanoecigs.com/tube-tank.html

The all new Tube tanks are a vaping junkies dream! These new tanks come as a complete setup that utilize a plastic tube that houses a classic cotton polyfil cartomizer that has a hole punched into it to allow juice being held in the outer tube to continually feed the cartomizer. This keeps the heating element and wick completely saturated at all times and in turn increases your vapor production and lengthens the life of the cartomizer.
Includes 1 tube tank, 1 polyfill cartomizer with 1.5 ohms resistance and 1 Delrin Drip tip

The 4ml will sell for $16.99
and
The 7ml will sell for $19.99

We will have replacement cartomizers for them next week there will be a 1.5ohm Dual coil and a 3.0ohm single coil

We will also have aluminum capped Tube Tanks next week.

This is the 4ml Tube Tank


The 4ml is the same diameter of the Inferno (Ego style battery)
and
The 7ml is the same diameter of the new Lavatube ( our new VV mod that uses an 18650)

 

[JoeInferno]

Here are a couple pics of the 4ml Tube Tanks on the Inferno (ego type battery) and Lavatube ( new VV mod being released soon)

 

[Macleod]

Already saved to my wishlist for my next order.

How much will the aluminum version sell for?

 

[monarch79]

I have been vaping on two new Tube Tanks (both 4ml) for the past three hours or so, and I must say, I am quite pleased...

There has been some debate on whether or not they are going to wick well enough with 1 tiny hole... With quite a bit of puffing on each one, I haven't had a dry-ish hit yet... However the juice doesn't seem to be re-absorbing, or if it is, it's really really sneaky... I can get the hole to bubble a bit, if I really try to suck on the mouthpiece, but other than that it doesn't seem to be moving...

I'm gonna throw my hat in here and suggest two larger fill holes instead of one small... The Liquinator uses two giant slots, the Cartomator uses two small holes (slightly larger than the TT), and I'm not sure if one small hole is gonna keep up with me... I don't know, it's working for me so far, but I would suggest 2 slightly larger holes from my experience with the other two carto-tanks I've had...

We shall see! ←(maniacal laugh)

That being said, also keep in mind that this is an issue with the carto and not the tank itself, and the carto is the replaceable part. The tank is what we paid about $15 of the $17 we spent, and it seems to be very well made. I have two TTs, and neither of them spin like the Liquinator (which has too loose a grip on the carto) and they both look very clean and professional. Nice lines, pretty decent finish on the caps (only one out of four had a scuffy finish)... And the bonus to the 4ml tank: it works on my GLV without an adapter.





The cartos hit pretty well, but I've never used a DCC so I don't have much to compare it to... It's putting out the vapor that a standard Boge LR carto would, but without any distortion to the flavor of the juice. I might even go slightly lower in ohms and see what happens. I do like the hit of these cartos so far. It seems like it takes a second for them to fire up, but when they do, they snap crackle and pop!


- LONG STORY SHORT -

I think these are well worth $17 for the 4ml, and $20 for the 7ml. The carto isn't having problems, but seems to be wicking slowly.The tank itself seems to be flawless. If I had to find fault with the tank itself, I would say the lettering isn't my favorite. Just the V logo by itself would be cooler IMO. Besides that, I would like to see two slightly larger holes in the carto, and cartos with higher and lower ohms available in the future... All in all, a very good buy.




(4 out of 5)

 

[JoeInferno]

7ml Tube Tanks are now in stock. They are going for $19.99.
These as well as the 4ml will also make great stocking stuffers for those you know that vape.
Tube Tank

 

[strprswpr]

What is the clear tube made of? Is it acrylic or polycarbonate? Or another material? How long before the aluminum caps are released?

 

[JoeInferno]

the tube is a poly-carbonate, and the aluminum caps should be here in the next week or so, depending on any unforeseen shipping issues....

 

[AvalonMyst]

Can any carto be used or does it have to specifically use the ones you sell?

 

[BardicDruid]

This is just the SmokTech tank you can get at GotVapes or Stormy'sVaporCeller for $12, just has the name on the carto, no sure I'd want that logo in my e-liquid.

 

[monarch79]

You can use any XL carto, but these pre-punched and flanged DCCs are convenient and pump out the clouds!

The logo is on the outside of the tank, not the inside, and these are made by a different manufacturer... Though I believe the carto is a Smok carto.

Carto-tanks are all very similar, but nobody else is selling the slim 4ml version, it's worth checking out!

 

[JoeInferno]

Replacement Pre-Punched Tube Tank 1.5ohm Dual Coil Cartomizerc (DCC) are now up for sale on the site, for $2.99 each and $2.69 each if you buy 5. The 3.0ohm single coil ones will be in later this week or early next week.

Tube Tank - Refill Cartomizer

 

[JoeInferno]

Can any carto be used or does it have to specifically use the ones you sell?

Any "naked" mega carto will fit in these. Ours do come pre-punched and with the flange on them to prevent he tank form sliding off the carto and dumping your juice everywhere.

no sure I'd want that logo in my e-liquid.

The logo is on the outside of the tank so the logo would not be in your juice at all

 

[strprswpr]

Are we closer to the new caps?


Sent from my iPhone using Tapatalk

 

[JoeInferno]

The chromed aluminum capped Tube Tanks should be here the middle of next week.

 

[JoeInferno]

The 3.0ohm single coil replacement cartomizers are now in stock.

Tube Tank - Refill Cartomizer

the chrome capped Tube Tanks should be in, in the next few days.

 

[JoeInferno]

looks liek the chrome capped tanks got pushed back a few more days and wont make this week. Sorry folks. Should be early next week.