5 vt and 3.7 vt box mods cheap
- Thread starter danlisi
- Start date
- th_trl_thread_readers 0
- Status
I finnaly got around to trying my 5V blue box, and this thing hits real nice!! Made my old atty hit like new again, and the vape is nice and warm, mmmm makes apple pie taste amazing... buy this!
I'm selling a second it has a small hole drilled in the wrong spot behind the battery it's a 3.7 vt box mod in a clear case it's $15
It has an on off switch and a white light it's a 510 model and works great!
It has an on off switch and a white light it's a 510 model and works great!
I'm very sorry I'm having a very hard time with my pics I'm trying to get more pics up for larger pics go to the blocks showing no pictures there are some bad pics there but still bigger
Last edited:
Batteries are in 14500 s are $6 each $5 for each additional battery they are trust fire 900 mah batts shipping always included !!if you buy a box the batteries are $5 each!!
Last edited:
bump for my buddy, Dan. I vape 18650 batts exclusively but I know Dan does good work!
Ask about my seconds sale big savings for a small crack or imperfection in your box
Thanks, just received my 20$ mod box, 3.7 volts, 808 connector, using a 14500 battery, design is nice, sturdy box, on/off switch, a little bit bigger than a bic lighter, it's really small and convenient. So it do looks good, but I can't get a consistant vape !
I press the button, the light turns on but nothing's happening to the cartomizer (no sound, no sizzle, no vape), I need to press very VERY hard to make it work and sometimes it doesn't light the cartomizer. And when it do work, the vape is kind of cold, looks like it only draw 1 volt. I tried fresh charged trustfire 14500 from dealextreme and IMR 14500 from clouds of vapor (this one needs a spacer to be able to fit), and I used these batteries on all of my 3 wetbox until they died (this thing is crap, the switch always die), so I know the battery do work. Absolutely no juice leaked inside.
I need to point out that it did work fine for about 10 minutes when I first tested it and I was pretty much happy. Seems like everyone else in this thread has been able to make it work, just not me, what a shame.
I press the button, the light turns on but nothing's happening to the cartomizer (no sound, no sizzle, no vape), I need to press very VERY hard to make it work and sometimes it doesn't light the cartomizer. And when it do work, the vape is kind of cold, looks like it only draw 1 volt. I tried fresh charged trustfire 14500 from dealextreme and IMR 14500 from clouds of vapor (this one needs a spacer to be able to fit), and I used these batteries on all of my 3 wetbox until they died (this thing is crap, the switch always die), so I know the battery do work. Absolutely no juice leaked inside.
I need to point out that it did work fine for about 10 minutes when I first tested it and I was pretty much happy. Seems like everyone else in this thread has been able to make it work, just not me, what a shame.
Same thing happened with mine. Exact same thing w/ trustfire & imr 14500 on a blue 3.7v box and it happened to be the negative wire where it had a solder contact on the outter rim of the 510 adapter. I had to have a friend re-solder the connection and it was fine, until I dropped it and cracked the case. It worked great after I fixed, must be a problem in shipping or something, because I know that Dan test fires the boxes before they ship.
All my boxes are fully warrantied I'll fix any problem you may have just send it back to me and I'll take care of you
Last edited:
Same thing happened on my 5v mod.
I sent it back once already but the same thing happened when I got it back. It vaped for 2 minutes and then stopped working. The LED comes on but the atty doesn't fire. I looked inside and see the Radio Shack 7805 mosfet was used and it's only 1.5 amp so my 510 atty's won't work with this mod. I am going to get the correct regulator from TI and replace it myself.Nah...it's no big deal really. I can get the mosfet cheaper than shipping it back and fix it myself. Danlisi already took a look at it and sent it back really fast..there is no reason for both of us to keep paying shipping costs back and forth.
Danlisi already took a look at it and sent it back really fast..there is no reason for both of us to keep paying shipping costs back and forth.
I've been using these regulators all along and have had no problems with them but due to your suggestion I'll try a different regulator in future mods I'm sorry you had a problem with it
I've just ordered ti 3 amp regulators for future box mods as per your suggestion
I've just ordered ti 3 amp regulators for future box mods as per your suggestion
Last edited:
- Status
Similar threads
