Does anybody know what might drop the 510 Atomizer from its original 3.3 ohms to 2.7 ohms? I have cleaned the atty in hydrogen peroxide and rinsed in water, and then blown it out aggressively, let it dry. Even when dry I am getting a much lower reading than I believe I am supposed to. This seems to be causing a drastic reduction in vapor and throat hit. Does this mean it's time to fork over some cash for a new atty? Thanks for your help!
510 Atomizer Reisistance
- Thread starter ChrisVap657
- Start date
- th_trl_thread_readers 0
- Status
too much cleaning and too fast using it again.
cleaned atomizers, if not totally still full of carbon on the coil,
may take a while to kick in again.
the resistance of my joye/janty/tw 510 was never higher than 2.5ohms, my best performing read 2.2ohm.
reading higher ohms led to cooler, less throat hit and less vapor.
cleaned atomizers, if not totally still full of carbon on the coil,
may take a while to kick in again.
the resistance of my joye/janty/tw 510 was never higher than 2.5ohms, my best performing read 2.2ohm.
reading higher ohms led to cooler, less throat hit and less vapor.
After a good cleaning you may need to drip a few drops on the bridge to re prime the atty. Sometimes several.
So, ultimately, my atomizer is fine, and I just need to give it some time. Thanks!
Most likely. My first PV took me forever to make it work right. I thought it was bad. It was me.
I definitely clean too much. Although I haven't run into this problem with my M601/602. I had actually loaned the 510 to a friend and it didn't get cleaned for about a month, so I went about cleaning it. I'll just let the juice soak in and pray for increased performance.
Pray? That's a little dramatic, isn't it?
From the sound of your posts in this thread you only have the one 510 atty? That's a disaster waiting to happen. There shouldn't be all that much change in the resistance reading between a dirty and clean atomizer, some variation but not a whole lot. Your atty may be FTD. (fixing to die) It makes sense to get yourself a few spares, Chris. I recently bought 20 Joyes for slightly more than the cost of a carton of cigarettes -- that's probably a year's worth of attys compared to a week's worth of cigarettes. And I didn't even have to pray. =)
At the moment, I actually own a M601/602 and the 510. I use the 510 as a backup and loaner to friends I am trying to persuade into vaping. I have 3 attys for the 601, and the original 510 atty is about 2 months old, so I'm not shocked. Unfortunately, I lost my job a couple of months ago, so cash flow prohibits me from ordering backup attys on more than one device. But what a life saver the e-cig has been! I haven't had to worry about having 6 bucks every other day to buy new cigarettes, because I have a couple of 30 ml bottles of juice in storage and plenty of mixing supplies. I am so glad I made the switch.
i had the same problem after cleaning atty produce less vaper,i cleaned along side my m4 ,m4 work fine like new .510 damb peice of ...., nother point to mxxx series very good product just need juice delivery system...
If it was originally 3.3 ohms it isn't a Joye 510 atty. It has to be one of the many clones being made these days and a drastic ohm shift like that means it's probably had it.
- Status
Similar threads
