510 connection grounding issues?

[hubstacker]

I'm building my own okrt10 mod and wanted to know if I would have any problems with the 510 connection grounding out if I were to just put the connector on my hammond box?

for extra info, I'm using these parts

1x SEALED Prewired 510 Connector for DIY Mods | eBay

Invalid Request

any info would be greatly appreciated!

 

[Visus]

Your question is hard to comprehend what your asking.

There are three connection the 510 can/will have with a metal enclosure: atomizer positive, atomizer negative, and case ground. The only way to short/problems with the 510 would be to damage the grommet that isolates the positive center pin or bridge the center pin and the shell/threads on the 510 with metal. The case will also be ground because of electrical contact with the 510 or you solder or mechanically attach a lead/wire to the case directly from the battery. You can do both if you want, the black wire soldered to the battery and a soldered wire to the case and have a huge ground, or simply just black wire soldered to the -neg battery post..

 

[hubstacker]

thanks, although I did a poor job explaining my question you answered it perfectly for me!