#60 O-Rings by Danco 35774B

[Waddle]

I need these o-rings to fix my vamo 5 firing pin, but I live in Korea. Does anyone know what the metric size is for these o-rings. I googled the last two nights for an equivalent but was unable to find

Thanks!

 

[Warpigs]

https://www.google.com/shopping/pro....3&ei=ikLmU8GqIoaayASCvIKYAw&ved=0CIICEKkrMAk

 

[Waddle]

Yes I know they can be bought in the USA, but I'm in Korea and the shipping costs are astronomical. $ 2.00 for the o-ring and $27.00 for shipping and taxes. There must be a metric equivalent. I can buy a new Vamo 5 for $28.00 shipped on FT.

 

[Kaezziel]

6.35mm OD x 3.18mm ID x 1.59mm wall
Don't know where to get them in Korea though...

 

[Warpigs]

Yes I know they can be bought in the USA, but I'm in Korea and the shipping costs are astronomical. $ 2.00 for the o-ring and $27.00 for shipping and taxes. There must be a metric equivalent. I can buy a new Vamo 5 for $28.00 shipped on FT.

Sorry, just googled it. Good luck finding what you need!

 

[Waddle]

Thanks guys...hopefully not that difficult to find.

 

[Kaezziel]

Good luck, Waddle... wish I could be of more help...

 

[Warpigs]

If you have home depot in korea i found this http://www.homedepot.com/p/DANCO-60-O-Rings-10-Pack-96774/100239341

 

[Waddle]

No such luck Warpigs...Tesco is about the only western franchise department store...the rest all cater to Koreans (e.g. LotteMart). Its frustrating living in Korea sometimes if you're a foreigner Thanks for the effort none the less.

 

[Ronald3638]

I noticed that the metric orings I have labeled based on the ID and wall thickness so a 3mm x 1.9mm may work for you.
Good Luck