69 telescopic mod by Atmomixani

[Loco69]

NEXT RELEASE BY ATMOMIXANI


on Wednesday 20-11-2013 at 09.30 a.m. , local Time Athens, Greece.
You can see the difference in time here The World Clock


Products to be released

Dome atomizer shined for Nemesis
By Atmomixani : Dome Shined for Nemesis

Dome atomizer matte for Nemesis
By Atmomixani : Dome Matte for Nemesis

Dome atomizer shined for 69
By Atmomixani : Dome Shined for 69 mod

Dome atomizer matte for 69
By Atmomixani : Dome Matte for 69 mod

69 Telescopic mod Eric's Edition V2
https://www.atmomixani.gr/index.php...scopic-mod-v22013-07-04-07-02-15_-detail.html

Nemesis shined edition
https://www.atmomixani.gr/index.php...urer-atmomixani-eg/nemesis-shined-detail.html

Nemesis Kalafan edition
https://www.atmomixani.gr/index.php...rer-atmomixani-eg/nemesis-kalafan-detail.html

Nemesis Mixed vape Pit edition(Brass caps and kick ring shined, ss tubes matte)
https://www.atmomixani.gr/index.php...i-eg/nemesis-matte-mixed-vape-pit-detail.html

Nemesis Mixed Greek Vapers edition(Brass caps and kick ring matte, ss tubes shined)
https://www.atmomixani.gr/index.php...omixani-eg/nemesis-matte-mixed-gv-detail.html

Serials in Dome will be random from 001 to 1000

I would like to remind you that confirmed order is a payed order.That means that even if you have the product in your cart if the product meanwhile goes out of stock your order will not be completed.


All the orders will be shipped by order on Wednesday and maybe on Thursday too with Ups courier..1-4 days delivery worldwide...

Regards
Katerina

 

[Ghiro]

Need to understand why my 69 doesn't fire.
I've rebuilt it several times, it works for a while and then .... no way.

Can i send it in and have you guys give it a check?

Also: couldn't find the 18350 tube of my Nemesis Kalafan, after a search i found it in my kids toy box ... need one badly but i can't find it in the shops . Is it possible to get a spare ?

 

[buergermeester]

Need to understand why my 69 doesn't fire.
I've rebuilt it several times, it works for a while and then .... no way.
Can i send it in and have you guys give it a check?....

With the hope your battery is fine and ALL contacts/pole are clean against oxidations, maybe also The Kick and inside extension-tube. You have enough contact with Cartomizer/Atomizer?, adjust positive pole>left thread! Check also switch contact and try after a 180° turn of fire-button.

 

[Ghiro]

Thanks for your help buergermeester, here's the situation:
2 months old IMR's i daily use with my other PV's, no oxidation on the contacts, don't use kick.
I use only rebuildables that i always check in other mechanical tubes i have and/orOhm meter box.
Positive pole always checked prior to fire, the contact between the fire button and the positive pin is shiny clean.

 

[Cyclin]

Thanks for your help buergermeester, here's the situation:
2 months old IMR's i daily use with my other PV's, no oxidation on the contacts, don't use kick.
I use only rebuildables that i always check in other mechanical tubes i have and/orOhm meter box.
Positive pole always checked prior to fire, the contact between the fire button and the positive pin is shiny clean.

Do you have any battery rattle when its assembled? If not, check the switch contact, specifically the one that turns when you turn your 69's switch to the "lock" position. If that contact is not centered try centering it and see if that helps. If it doesn't, take a look at where it makes contact, you may need to move it slightly up or down to make contact with both sides. When the switch is depressed that contact completes the current between the pin above it and below, so see if is not touching one side.

If you don't feel like adjusting with the pin by opening the switch, first turn it one direction to lock, and again in the same direction to unlock, this will switch the lengths from one side to the other. Though if the quick way doesn't work and that pin IS your problem, you will still need to to adjust normally.

 

[Ghiro]

Cyclin you got it!

It is that damn pin. It didn't actually touch the switch amd it was a mess up to see it through the all assembly. But i made it.
I hop it wont bother me anymore, i love this Mod it's perfect for my needs.

Thank you guys! Howe you a beer.

 

[buergermeester]

Cyclin you got it!

It is that damn pin. It didn't actually touch the switch amd it was a mess up to see it through the all assembly. But i made it.
I hop it wont bother me anymore, i love this Mod it's perfect for my needs.

Thank you guys! Howe you a beer.

Well done "Eidgenosse" and big thanks to Cyclin for description with switch contact.
By the way, I cannot imagine my world without 69`er Mod

 

[Cyclin]

Glad I could help

I too love my 69 mod. Even when I'm using other devices for weeks at a time I could never sell/trade the 69 cause I always end up coming back to it again later lol

 

[AaronY]

Can the switch handle .2 ohm?

 

[Loco69]

Yes it can..

 

[AaronY]

Is the button designed the same as it was in V1 other than making the contact silver plated?

 

[Loco69]

Difference in V2 is the upper cap ring, no use of spring but only contact and regarding button slight difference of /10mm less distance between tube and button...

 

[Loco69]

Kingvap i have seen also your mail..
I ll check for the parts you need on Monday and i ll mail you back...

 

[Loco69]

Just for one time and for Christmass we made a special edition of 69, all brass

This will be release in this month ..I will give you the date of the release in the next days

There are only 216 pieces and most possible will not remade as it took as too mush time for them because of the sensitivity of the brass material and 69 construction..

Some photos...

Serials will be different from ss...

 

[Ghiro]

I bought an used 69, how do i recognize if it's a V1/V2 ?

 

[Loco69]

same as 69...138 euro..

 

[Loco69]

I bought an used 69, how do i recognize if it's a V1/V2 ?

most obvious 69 V2 doesnt use spring but only contact..

 

[Cyclin]

Awesome. Very awesome

 

[Cyclin]

Hey is there a Stealth cap for the 69 like the is the Nemesis? I don't need the airflow control on my 69 recently and would like to shave a couple mm off total height.

Thanks

 

[Dru_Duns]

Damn that looks sick Loco your killing bro, and I still can't believe they cloned the 69