69 telescopic mod by Atmomixani

[evgeny131]

just for one time and for christmass we made a special edition of 69, all brass

this will be release in this month ..i will give you the date of the release in the next days

there are only 216 pieces and most possible will not remade as it took as too mush time for them because of the sensitivity of the brass material and 69 construction..

Some photos...

serials will be different from ss...

gorgeous!!!

 

[evgeny131]

anyway for me to turn this

into full brass eventually?

 

[AaronY]

into full brass eventually?

I hope they make a copper version first.

 

[Loco69]

NEXT RELEASE BY ATMOMIXANI


on Monday 23-12-2013 at 09.30 a.m. , local Time Athens, Greece.
You can see the difference in time here The World Clock


Products to be released

3D shined for Nemesis
https://www.atmomixani.gr/index.php...r-atmomixani-eg/3d-shined-nemesis-detail.html

3D shined for 69
https://www.atmomixani.gr/index.php...cturer-atmomixani-eg/3d-shined-69-detail.html

3D matte for Nemesis
https://www.atmomixani.gr/index.php...er-atmomixani-eg/3d-matte-nemesis-detail.html

3D matte for 69
https://www.atmomixani.gr/index.php...acturer-atmomixani-eg/3d-matte-69-detail.html

69 Brass edition
https://www.atmomixani.gr/index.php...i-eg/69-brass2013-12-11-09-09-13_-detail.html

Dome atomizer shined for Nemesis
By Atmomixani : Dome Shined for Nemesis

Dome atomizer matte for Nemesis
By Atmomixani : Dome Matte for Nemesis

Dome atomizer shined for 69
By Atmomixani : Dome Shined for 69 mod

Dome atomizer matte for 69
By Atmomixani : Dome Matte for 69 mod

69 Telescopic mod Eric's Edition V2
https://www.atmomixani.gr/index.php...scopic-mod-v22013-07-04-07-02-15_-detail.html

Nemesis shined edition
https://www.atmomixani.gr/index.php...urer-atmomixani-eg/nemesis-shined-detail.html

Nemesis Kalafan edition
https://www.atmomixani.gr/index.php...rer-atmomixani-eg/nemesis-kalafan-detail.html

Nemesis Mixed Greek Vapers edition(Brass caps and kick ring matte, ss tubes shined)
https://www.atmomixani.gr/index.php...omixani-eg/nemesis-matte-mixed-gv-detail.html


I would like to remind you that confirmed order is a payed order.That means that even if you have the product in your cart if the product meanwhile goes out of stock your order will not be completed.
If you have any problem with payment mail me at info@atmomixani.gr

Due to annual fiscal closure resellers will get stock first days of 2014



Regards
Katerina

 

[Loco69]

I would like to inform you that on Wednesday 25-12-2013 and on Thursday 26-12-2013 our shop will be closed and therefore all the orders will be shiped on Friday 27-12-2013

I wish you all your Christmas be filled with love, joy and happiness. MERRY CHRISTMAS.

 

[Snickerfritz]

I love my 69. I haven't had time to read the entire thread, but the fire switch is a little inconsistent. Sometimes it won't fire at all, and sometimes I've have to wiggle the switch around after pushing it to get it to make contact. Were it not for the inconsistent switch, well this thing would be absolutely great. Anyone else have trouble with their switch, or, have a good fix?

 

[Cyclin]

I love my 69. I haven't had time to read the entire thread, but the fire switch is a little inconsistent. Sometimes it won't fire at all, and sometimes I've have to wiggle the switch around after pushing it to get it to make contact. Were it not for the inconsistent switch, well this thing would be absolutely great. Anyone else have trouble with their switch, or, have a good fix?

Here are two posts I mad eon this thread in the last few pages that should solve your issue

Do you have any battery rattle when its assembled? If not, check the switch contact, specifically the one that turns when you turn your 69's switch to the "lock" position. If that contact is not centered try centering it and see if that helps. If it doesn't, take a look at where it makes contact, you may need to move it slightly up or down to make contact with both sides. When the switch is depressed that contact completes the current between the pin above it and below, so see if is not touching one side.

If you don't feel like adjusting with the pin by opening the switch, first turn it one direction to lock, and again in the same direction to unlock, this will switch the lengths from one side to the other. Though if the quick way doesn't work and that pin IS your problem, you will still need to to adjust normally.

Aside from the silver plating wearing you still need to perform normal maintenance Giving your 69 a good cleaning will generally improve performance again if if has not been cleaned in a while. Just pull it all apart and clean everything, threads, contacts, etc.

 

[Snickerfritz]

Thanks. Yeah, I've fiddled with the switch pin. It seems to work more consistently with the flat head slot facing down (away from the atomizer) for some reason, but it still does not work entirely consistently. Thanks, I guess I'll keep fiddling.

 

[jrs99]

I just got my 69 and had problems with the switch as well. I solved mine by removing the black insulator on the switch and now it fires every time in either position. For me it seems the insulator was blocking the connection.
I love this thing now.

 

[Snickerfritz]

Still having problems. I'm not sure what black insulator you're talking about. The only black pieces I see on my switch are a black o-ring that fits onto the switch post and sits between the the pin and the outer body, removing this makes the fire button all loose and doesn't otherwise seem to affect anything, and a black piece on the bottom of the switch which without it would give nothing for the bottom pin to thread into.

 

[jrs99]

The little black washer shown on the switch is what I removed. You don't mention the red washer, does yours have it?

 

[Snickerfritz]

Nope, mine doesn't have that piece (clone), and my o-ring is black, not red. Nevermind though, I think I've narrowed my problem down to an intermittently firing kick module. Remove kick, fires every time.

 

[Say10]

I picked one up (brass) and it's without a doubt my favorite PV to date. It's beautiful and hits like a freight train. Honestly, I've wanted to add a Nemesis to my collection but I may just pick up an Eric's Edition.

 

[AaronY]

Any plans on making a copper version? The 69 is amazing.