6V recommendations?

[stefon]

I am looking for a pv that is meant for 6V. I currently have the devices listed below. I like how they perform at 3.7v, also I don't want to hinder their function as I was informed that it is not recommended to use them at 6v. So what are some of the better choices? I would love to get an ali'i, but they are never in stock and I always seem to miss the ordering window.

Thank you.

Stefon

Current Collection:
Screwdriver
Silver Bullet
Black Omega

 

[Firefly13]

The GGTB is fantastic, only 73 bux too for an all mechanical mod, would go nicely with your current toys

NEW GG Telescopic Battery electronic cigarette

 

[WillyB]

Silver Bullet

You already got what your need, except for a pair of cells and charger.

A pair of 3V cells don't really provide 6V vaping, nor is their any consistency to the vape.

Might be time to embrace some new technology.

The Buzz

 

[Firefly13]

You already got what your need, except for a pair of cells and charger.

A pair of 3V cells don't really provide 6V vaping, nor is their any consistency to the vape.

Might be time to embrace some new technology.

The Buzz

Or he could just buy the Terminator adapter for his SB and it will do the same thing as the Buzz.

 

[ShannonS]

I use the Omega at 6V daily.

 

[stefon]

I use the Omega at 6V daily.

which brand/type batteries do you recommend?

 

[ShannonS]

For 6V, use RCR123A. I've been having trouble with Tenergy batts running too hot and popping atties when I use a regular atomizer. HV atties at 6V don't give me the warm vapor I love so I'm still looking for a set up that suits me perfectly.

Your silver bullet can use a couple of 3V batts as well, can't they?

Check this out: Battery Tube e-Cig Mods | e-Cigarette Mods Database

 

[cskent]

For about the cheapest, good quality 6v mod try the Maxi Rough Stack. 3.7 or 6 volts!.

 

[irefine]

I would recommend the AW LifePO4's, I use them in my Omega w/ no problems. I also had problems with the tenergys.

 

[ShannonS]

Where are you buying those, irefine? <grin>

 

[aprioristic]

Where are you buying those, irefine? <grin>

I just got 2 in the mail this morning from SuperT

 

[CardinalWinds]

I would recommend the AW LifePO4's, I use them in my Omega w/ no problems. I also had problems with the tenergys.

Absolutely. The Tenergy's cannot give the amperage that atty's/cartos want to draw. The AW's perform much better. I got mine here. I've ordered twice from Lighthound and have gotten excellent service both times:

AW LiFePO4 3 Volt Lithium Rechargeable Battery

 

[LittleMissVapor]

What Atty do you use with the 3volts batts from Lighthound? I have the SB and bought the tenergy batts but they seem wimpy at 6v. I use a HV atty , when I tried a regular atty, it popped it after two hits.

 

[CardinalWinds]

I use 510 attys and cartomizers. Most "standard" 510 attys are rated at around 2.3-2.5 ohms. That's a bit low for 6V vaping. You can use them, but you have to be careful. By this I mean one of two things. Either shorten the length of time you activate the atty...two seconds max, for example, or what I do is "pulse" the switch. Draw on the mouthpiece continuously while giving the switch a few short bursts, maybe three or so. I have a few standard resistance attys left, but I keep them for emergencies. At 6V I find attys in the 3.1-3.5 Ω range to be the best. You can take a normal drag on these and not worry about popping the atty. Perfect for dripping. I've tried a couple of the higher resistance HV attys that come in at around 4-5Ω, but for my personal preference they run a little too cool. I get my atty's and cartos here:

Joye510 Atomizer Select the high resistance option. Great attys.

510 Spare Atomizer These work great.

Refillable 510 Cartomizers Boge cartos that run at a little over 3Ω. Love 'em.

Puresmoker also has some BE510 cartos that you can get at 4.5Ω, but I like the Boge's better. The BE510's aren't bad cartos, though.

 

[LittleMissVapor]

Thanks, I'll try the PureSmoker atty's. I'm also going to get the LifePo4 batts.

 

[Vapenstein]

The GGTB is fantastic, only 73 bux too for an all mechanical mod, would go nicely with your current toys

NEW GG Telescopic Battery electronic cigarette

901 connector is a bust for most of us. They need to offer this in 510. I don't want to use an adapter, thank you.

 

[Vapenstein]

For about the cheapest, good quality 6v mod try the Maxi Rough Stack. 3.7 or 6 volts!.

For the cheapest, prettiest 6V mod check out Hot Vapes' The Bombshell.

 

[Firefly13]

901 connector is a bust for most of us. They need to offer this in 510. I don't want to use an adapter, thank you.

It's not a bust for most at all, a lot of us prefer the 901 because it has more flavor than a 510, either way it doesn't matter to me i just use 808 cartomizers now lol. Imeo is making 510 caps for them after xmas.

 

[jmanning]

For the cheapest, prettiest 6V mod check out Hot Vapes' The Bombshell.

That is a nice looking mod

 

[son et lumiere]

Hva eyou tried 6 volts? You may not want 6 volts after you have tried it. Check out notcigs.com for a vari volt mod.