801/510 cart question

[Mingolvr]

Are the carts interchangeable from an 801 to a 510?

I've searched and can't find anything. I see all the talk about the 801 carts holding more than the 510's. I have a ton of 510 atty's but a larger cart would be nice...I know the 901's fit.

 

[Psyc]

Nope. 801s are considerably larger than 510s.

 

[Kent C]

Are the carts interchangeable from an 801 to a 510?

No................

 

[Mingolvr]

ok, they looked longer, but I wasn't sure about the width.

Thanks!

 

[Webby]

ok, they looked longer, but I wasn't sure about the width.

Thanks!

Mingolvr - look into the tea bag mods if you want to increase the liquid capacity of a 510 cart. Just be careful about packing them, touch an atty and you can easily short it out.

 

[Brachinus]

You can order 510/801 and 801/510 adapters (either way) from altsmoke.com.

 

[abhowe]

With the 801, when I exhale no vapor comes out......Vapor comes in but nothing comes out....... With my 501 and 901 I exhale vapor..... I don't understand because these are all being used on the same GG Transformer...... Anyone got any answers please.......

 

[Hellen A. Handbasket]

Sounds like you don't have enough liquid Ab! The 801 needs lots of liquid and a straw modification helps to get the liquid down on to the bridge since it is such a large cartridge. The straw mod helped to make my 801 a fog machine.

Also try dripping directly on the bridge say 4 drops especially if you are using a new atomizer.

 

[abhowe]

Will try that, Thank you.......

 

[Brachinus]

Sounds like you don't have enough liquid Ab! The 801 needs lots of liquid and a straw modification helps to get the liquid down on to the bridge since it is such a large cartridge. The straw mod helped to make my 801 a fog machine.

Also try dripping directly on the bridge say 4 drops especially if you are using a new atomizer.

I never tried 4 drops, but I tried dripping directly on the bridge of my BE112 (with a Mini Pipe), and had the same effect. I could take deep draws that made me dizzy (maybe that was just from sucking on the automatic battery), but little or no vapor coming out of my mouth.

Ab, what voltage are you using in your GG? I've heard that 801's work better at 5 or 6 volts than the usual 3.7v (like in my Mini Pipe or the original penstyle unit).

 

[MaxUT]

With the 801, when I exhale no vapor comes out......Vapor comes in but nothing comes out....... With my 501 and 901 I exhale vapor..... I don't understand because these are all being used on the same GG Transformer...... Anyone got any answers please.......

The type of atomizer bridge makes a difference. Low bridge attys like the Janty Penstyle or the 302 work much better with a cartridge. I have BE112s on order, supposed to be best of all. High bridge attys work best with dripping.