Absinthe issues?

[brugmanncues]

OK, so I've been vaping absinthe for quite a while now. But EVERY tank I put it in, it floods the battery contact really fast! I've tried: Kanger Protank, Protank 2, Protank 3, EVOD, Mini Pros, Vivi Novas, V-Core 2.0s, Aspire BDC full size and Mini, the Iclear 30S and the Iclear 30B. THEY ALL FLOOD!

Is it an issue with the Absinthe? Or am I just doing something wrong?

Thanks for any help,

Nathan Brugmann

 

[Mrs C]

Whats the pg/vg ratio? I use an absinthe flavor from a local shop and have had no issues.

 

[brugmanncues]

80 vg / 20 pg

 

[Rickajho]

Hi

Let's try to narrow it down.

First absinthe is a known plastic tank cracker. So that could be the problem right there with any of the Vivi Nova's, EVOD's... any of the plastic tank devices. You may have to take a very good look at them to discover cracks, most like at the base. If you see any that's the most likely source of the problem with the plastic devices. It doesn't take much but if they are present that screws up the ability of the device to maintain the needed partial vacuum.

That wouldn't be the source of the problem with the glass tank items.

 

[Mrs C]

With so many types of tanks, I have to wonder if it's something with the juice. Have you used other juices from that vendor? Is this the first bottle of Absinthe flavor from them you have tried?

 

[brugmanncues]

Rick: The only issue with a plastic tank cracking was the iclear30b. There are crack lines all over the tank...not through it...but very noticeable. The leaking is not going through the tank walls or the bottom tank seals, its leaking through the coil heads into the battery (510) contact area

Mrs C: I've tried Absinthe juice from 5 different places before DIY'ing it. Tried the flavor from both perfumer's apprentice and flavor west, loved the taste from both. ALL the absinthe I've tried, vendor and DIY have all had this leaking issue. None of my other flavors have done it near as much (unless for a bad coil) as the absinthe