AC9 Rebuildable Atomizer: Update!

[Catharlex]

I guess the device he's using in the video posted could be something different, but it looks like a Provari to me.

Edit: I'm still fairly new to vaping (in comparison to a lot of people) so I'm not doubting you; I know more is always better, and I'm not trying to argue against that. It's why I went from Twists to a Provari.

 

[Scottinboca]

I build genesis attys to around 1.7ohm and I have no problem on my V2 Provari. I get tons of vapor and flavor! If I turn it up, I just get burnt nasty tasting vapor. This is just my !

 

[Striker911]

Its a Percise + 18650 with a MNKE battery. AW IMR is 10 watts continuous and the MNKE is 20 watts with a 30 watt ceiling. Im not trying to cause drama or a debate. Just trying to give you a heads up. We are all learning. I am using a Provari right now as a matter of fact. Wish I had known before I bought it, that I would soon want or need more. I am a huge Provape fan but its just not a good fit for my "More is better" style. Like I was saying. My ProV has been pushing max watts since I got a Genesis atty. One time I even got it to push 15.8 watts. It has a 14 watt limit.

I guess the device he's using in the video posted could be something different, but it looks like a Provari to me.

Edit: I'm still fairly new to vaping (in comparison to a lot of people) so I'm not doubting you; I know more is always better, and I'm not trying to argue against that. It's why I went from Twists to a Provari.

 

[Striker911]

I have a .8 ohm coil on mine and its max is 3.1V. As soon as the coil glows it trips E2. No dry burn. My 3-2 wrapped awg30 coil is caked.

 

[bmarley5780]

Sooooo...... It's Sept. 6. What's the deal??? Anymore info?

 

[BrianCig]

Based on his last youtube video posted on September 5 he said three weeks so it should be September 26

 

[Pete54]

Hey Striker, correct me if I'm wrong but if you wrap a higher resistance coil, say 1.8Ω and run your Provari at 6.0 volts you would be at 3.3 amps and get 20 watts. I don't quite understand why everyone builds ultra-low resistance coils when higher resistance allows you to achieve higher watts without excessive amps. What am I missing here?

 

[Swarley]

Man I can't wait for the AC9. I gotta start saving my pennies Gotta get one in the first run

 

[spraintz]

anybody have an idea of a price point? I have been clamping an eyeball on this atomizer for a bit now and am pretty interested but an estimated price would be nice.

 

[synthros]

Is there a pre-order list? Or is everyone just waiting for it to be released?

 

[doubledown]

Any plans to release a pyrex version in the future? I vape almost exclusively cinnamon flavors and have been told PMMA will crack with these.

 

[Ace of Spades]

yeah same here...hopefully there is something that could not crack the tank :/

 

[Striker911]

Hey Striker, correct me if I'm wrong but if you wrap a higher resistance coil, say 1.8Ω and run your Provari at 6.0 volts you would be at 3.3 amps and get 20 watts. I don't quite understand why everyone builds ultra-low resistance coils when higher resistance allows you to achieve higher watts without excessive amps. What am I missing here?

I was told by someone at Provape that its limited to 14 watts.

 

[RiPTrippers]

doubledown & Kazkonut , we have tested our tank with some pretty harsh cinnamon juice, let it sit with a full tank of cinnamon for 4 days straight, and had NO issues. Since our design has no o-rings supporting the tank area, there is zero tension on the plastic, unlike every other tank system in the world that uses o-rings to support the tank, which is your #1 issue with cracked tanks.

 

[Pete54]

I was told by someone at Provape that its limited to 14 watts.

Yup, I forgot about that.

 

[doubledown]

doubledown & Kazkonut , we have tested our tank with some pretty harsh cinnamon juice, let it sit with a full tank of cinnamon for 4 days straight, and had NO issues. Since our design has no o-rings supporting the tank area, there is zero tension on the plastic, unlike every other tank system in the world that uses o-rings to support the tank, which is your #1 issue with cracked tanks.

Hmmm, sounds interesting, and thanks for the quick reply. Glad to have a Carolina boy in the game Another hurdle I have is I need a tank with a OD of less than .825". Does your product meet this? And last is price and release date lol. BTW my birthday is Sept 28, can we do something by then?

 

[RiPTrippers]

doubledown, we plan on releasing the AC9 by then.

 

[6spdsurfer]

doubledown, we plan on releasing the AC9 by then.

Ugh, RiP, you're killing me with this wait. Your homepage is linked on both my Chrome browser and Phone Chrome browser. I just check it at random intervals everyday. Release it already!

 

[Mrmorbidthoughts]

The day is approaching. Can't wait RIP ! B-)B-)

 

[donneee]

so rip, is there going to be a midnight release?

i can't wait to dabble into my first real genesis. i got the vivi tank, and the only thing that worked for a while for me was the hybrid ss mesh wrapping silica wick around it. it still burned the flavor over time and gunked up my coils very fast. maybe i should rewatch how to make coils on your yt channel OR it could be i have limited space to work with.

from the teaser site you have, i see that you can take the whole cap off to expose the coils and screws without it being in... anything, correct?

also, i like to experiment, and i want to do a dual ss mesh wick with dual coils. any way you could machine me a custom.. umm top plug is the phrase i'm trying to use, yes top plug with an extra hole for a mesh and extra negative screw post? might seem silly; but even einstein was considered crazy at some point in time.

last thing, is it top heavy? and will the positive post connection to the battery bend in any way? i keep my vmax in my pocket most of the time and i've broken a few of my tanks like that bumping into things.