adapters question

[aruga]

Hello all

I have all most conqured my UFS but I have one final question.
Say for example I want to use one of ikenvapes 801 fusion cartos in my UFS. It looks like to me like some adapters (510-801, ect..) have holes in the bottom where the juice can flow in and some do not. Is this a correct assumption?

I guess to be clear...... do you have to be careful what kind of adapter you use in the UFS to not mess up the juice control? I used the one from ikenvape and could not get the juice in the fusion carto. I was assuming it was because it did not have the tiny holes like some of my other 510-510 extenders do.

any advice?

Thanks again to all you reply. This is the best forum I have ever found for knowledgeable help.
Aruga

 

[fright88]

For the adapter to work it has to have an open center post (sealed adapters won't work) and it must have side feed holes. I would also recommend putting a carto condom on the joint between the adapter and the carto ect so excess juice doesn't leak in there.

 

[aruga]

Thanks for the response.

Do you have a good site where you order adapters from. I have ordered alot and its very hard for me to tell if they have the correct requirements.

And sorry to sound dumb but a carto condom....I will have to look into those as I am not familiar.

Thanks so much for the response.

 

[aruga]

I now understand the carto-condom.. Forgive me ignorance.

 

[aruga]

Does anyone know of a good site to order a 510-801 adapter for the ikenvape fusion carto that will work in the UFS? The one I have does not have the feed holes and is useless in the UFS.

Its strange that all of the adapters out there that vendors don't give a better description of if they have feed holes, sealed vs unsealed, ect...

Any advice would be appreciated.

 

[fright88]

I think your best bet is to ask. I would check madvapes and or COV first. Bruce should understand what you are looking for and Madvapes has a bunch of stuff. Otherwise sorry I have never used 801 stuff so I don't know which adapters will work.