Advice? new to ego and Ohms

[fairweasel2323]

iSmoka BCC Mini Kit (Same as VapeOnly BCC) [ISMKBCCMNIKT] - $12.99 :

http://www.goodejuice.com/store/ego-clearomizers-ego-evod-clearomizers-c-21_152_185.html

Looking at either getting the iSmoka or the EVOD and ill be using a 3.4 Ego and a 3.7 EVOD 650 battery's I would like to get two maybe one of each? but what head ohm would be best with those batterys two different ohms...
I usually vape 50/50 but getting some samples in 70/30, I know i love GJs 555 and can only get in 50/50 but trying some of HHVs Heavenly tobacco and Shadow in 70/30 got a couple fruit flavors coming too Crackberry and Bleeding Heart

But what ohm head would u suggest i know alot has to do with the juice, Im not sure which ohm u want with what flavors light or strong and the ratio

 

[fairweasel2323]

Right now im using a no wick CE4 clone with my 555 not sure the ohm?? I have used the Kanger t4s 2.2-2.5 and at the moment im using these G5s that are 1.8 ohm for the GJ4 (not really liking) and Congo Craze (I Love) and think its better at 1.8 maybe more of throat hit wish I get Congo in 70/30 maybe HHV has something similar to the Congo

 

[tattooed.mama]

i dont know anything about ohms but i just got an ismoka. it came loaded with the 2.2 coil so i just left it. i really like the way it vapes (crisp clean flavor) but noticed that it burns thru my liquid super fast compared to the disposables that ive been using. i dont have anything other than disposables to base this comparison on but thought that id share that i like my ismoka!

 

[Bkag]

Basically the way to work out what ohm rating will be equal for both is done by figuring out the wattage you want to be at. Say, for example, you want to be at 7 watts. With the 3.4v battery the ohm rating which would produce 7 watts is 1.65ohms. With the 3.7v battery the ohm rating which would produce 7 watts is 1.96ohms. The way to work it out is Power (W) = Voltage Squared (V^2) / Resistance (R)

 

[fourthrok]

For the 3.3 eGo (which is the standard for non upgrade eGos) it's recommended you don't use below 2ohm. I think you can get away with 1.7 (my husband does) but it'll shorten the life of the battery.

The 3.7 is a bit more forgiving.

Personally...I dislike using cartomizers/atomizers that are even a jot below 2ohm. But that is just me. Probably 2.2 to 2.5 would be idea for both the batteries you are going to use.

 

[fairweasel2323]

2.2ohm probably what ill use, but right now just using the Kanger T4s and couple G5s that are 1.8ohm and got a couple No Wick cE4s that someone said was 2.4ohms

 

[fairweasel2323]

I ordered a couple EVODs, they are coming with the 1.8ohm heads pre installed, I will probably go to the 2.2ohm?? IDK maybe stick with the 1.8s?? But the smaller, .9ml Kanger G5s I got that are 1.8ohm seem to be very good with both batts I was told 1.8ohm be fine on both battery

http://25.media.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

 

[Bkag]

I ordered a couple EVODs, they are coming with the 1.8ohm heads pre installed, I will probably go to the 2.2ohm?? IDK maybe stick with the 1.8s?? But the smaller, .9ml Kanger G5s I got that are 1.8ohm seem to be very good with both batts I was told 1.8ohm be fine on both battery

http://25.media.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

I'd give the 1.8s a try and if they are producing the vapor you are looking for I'd stick with 'em. If you want a cooler thinner vape switch up to the 2ohm or 2.2ohm heads

 

[fairweasel2323]

Just got the EVODs so far I think im liking the 1.8ohm, I actually saw on here that the White Rhino battery and tank it came with in kit was tested on there meter by another member and he said he got a constant 3.7v out of the White Rhino and a 1.9ohm out of "invisible wick" clearo (looks like a knockoff of the No Wick CE4)...so if his numbers are right I did ok in buying the 650 EVOD batt and getting these EVODs in the 1.8ohm. I dont notice a difference in what batt I have on it, but I dont have a tester myself to see if his numbers where accurate..

his post.. Hey all. I really appreciate the help.
I did throw a meter on it and the voltage was 3.7V consistently after many draws and checking. The resistance was 1.9 Ohms.

heres the thread... http://www.e-cigarette-forum.com/fo...estions-white-rhino-fantasia-purple-haze.html

link to the Liquid Liquid Electronic Cigarette

Same White Rhino Liquid kit although I only spent 35$ (and all i wanted was batt and charger, i was in a bind and couldnt go all weekend without a battery, now i rarely use that batt...only when EVOD battery is charging

 

[fourthrok]

It's my understanding that the Evods run 3.7 regulated, while the regulated eGo (non upgrade) run about 3.3v. 1.8 would probably work great with an Evod battery. Actually...1.8 would probably be okay on the Smok and Joye eGos too...

 

[fairweasel2323]

his test was on this 650mah White Rhino battery with the cheap tank that came with it, i know the EVOD is 3.7 but according to his test on my other battery I have (I bought a Rhino kit when was in need of battery waiting on a order in mail) tested at 3.7v too...they both vape great with these 1.8ohm EVOD BCCs I dont notice any taste different so maybe they both are 3.7v i had never heard of a White Rhino just saw it came with a 650mah battery and it doesn't state any specs other then his test that i have seen

the liquid invisible tank that came with kit according to his test came out to a 1.9ohm which im not using that anymore at all the two EVODS are filled with Heavenly Tobacco and Heavenly Army then got a couple smaller Kanger T4s and 1.8ohm G5s that ill use for occasional flavors like I got some Crackberry in one now