Ah yah frost RBA build in the bag

[derekspencet48]

Just got my first rba in the mail today had the coils built in anticipation to get my igo w Put in the 7 wrap 30g kanthal tested with malty meter got a reading of 2.6 fired it up on mt itaste vv, worked, not well but I got vapor and grate taste with peach juice. I am looking for some advice on what size to drill my air holes to definitely not big enough as well as any other advice thanks and yay me.
live well and vape happy!

 

[p7willm]

Like taste the size of air holes is a personal thing. It is harder to close, you can weld, a hole that is too large than to drill a hole larger, just do it again with a bigger bit. I would recommend going just a little larger, giving it a try, and going from there.

Along with changing the draw changing the air hole size will change the taste and density of the vapor. Some people give up a bit on the draw to get more taste or vapor.

 

[NikZak]

On my Igo-L and Igo-W I have drilled the holes out substantially

I find that a 2.5mm hole works really well on the Igo-L (single air hole) whereas on the Igo-W dual 2.0mm air holes suit me very nicely, still get lots of flavor but a much better (for me) draw

I'd get a set of 1.0, 1.5, 2.0, 2.5, 3.0 mm cobalt drill bits and slowly work your way up in diameter until you find what works for you. The beauty of the Igo-W/L is that they are so cheap that if you go a bit too big you can always buy another and keep the top cap with the big holes for cloud chasing later when you potentially get into that

 

[derekspencet48]

Thanks I well start off small and see what I like.
live well and vape happy!