Ahlusion E-juice

[Blacks_n_Jacks]

hmmm.... that Apple Ginger sounds promising but I do not see it on the website

That's because I had it backwards -- it's Ginger Apple Tea in the tea section of the site.

 

[SeniorBoy]

Good morning "Tribe" /lol

I have a question and I sincerely hope and pray that our resident "Queen of Cream" will forgive my indescression.

I want to try Fijian Nights. Can you guys please give me a flavor/taste profile for this juice? Also helpful for me would be what delivery device you use? plastic clearo, glass clearo, rda, rba, or an IV?

Thanks in advance.

 

[Blacks_n_Jacks]

Good morning "Tribe" /lol

I have a question and I sincerely hope and pray that our resident "Queen of Cream" will forgive my indescression.

I want to try Fijian Nights. Can you guys please give me a flavor/taste profile for this juice? Also helpful for me would be what delivery device you use? plastic clearo, glass clearo, RDA, RBA, or an IV?

Thanks in advance.

Ha ha, Senior boy. So funny. I haven't had Fijian Nights, but I want to try it because of peraspera's (I think) recommendation. I think she described it a little while ago and it sounded really good.

 

[TexasVet]

Nope -- two 30's. But next time, definitely the 60mls. Or two!




8-o The very definition (for me) of ANXIETY ATTACK!!




We just might be the ultimate enablers!











I hope it's just a case of The Really Long Winter Blues. But Jerms and BnJ and others gave you some great advice!





"Flavor Curious"! Sounds dirty. I like it. (I resemble it! )





Ditto here. I am fairly sure we are not alone, either!





So glad to hear you're getting interviews, GD -- and that you seem not to mind having to move (you must be young! ). Here's wishing you the very best of luck, and soon!

Totally off topic, maybe, but...
El, how do you do this multi thingy? I see the 'Multi-Quote' icon on each post and have tried to figure it out but haven't. Can't find instructions on forum.
Just askin'
would make ocassional comebacks a bit easier.
PM me if it's easier.

 

[TexasVet]

I do enjoy vaping as opposed to smoking which I did only because I had to
I didn't really like to smoke for years

Geez you nailed it!
I realize I was always looking for a better smoke or a way to quit entirely. The addiction didn't allow quitting. At least now I have found a better smoke. It's VAPE

I am now a juice hobbit!

 

[vjc0628]

Geez you nailed it!
I realize I was always looking for a better smoke or a way to quit entirely. The addiction didn't allow quitting. At least now I have found a better smoke. It's VAPE

I am now a juice hobbit!

I started vaping to quit smoking

Never knew it could be so enjoyable till after the fact

I still work on lowering my nic and that's going slowly but well enough

But I really came to enjoy vaping far more then I ever knew possible smoking

 

[SeniorBoy]

I'm sitting here, finishing up a 10ml bottle of Fijian Nights.

It's delicious, but for the life of me, I still couldn't tell you what it tastes like!

It's fruity, a little rummy (maybe), with some dark spices and brown sugar (I think), but . . .


Oh who cares, it just tastes good!

LOL. OK "QOC" Does this new handle work for you? Found the above from Eleanor and her buds are close to mine. /cant help the double entands so please forgive me. Please

 

[rabernet]

Totally off topic, maybe, but...
El, how do you do this multi thingy? I see the 'Multi-Quote' icon on each post and have tried to figure it out but haven't. Can't find instructions on forum.
Just askin'
would make ocassional comebacks a bit easier.
PM me if it's easier.

Hit the plus to multi quote all the posts you want to reply to - then go to the bottom and hit reply - and all the ones you quoted will auto fill in, and you can post your reply between them all.

 

[Blacks_n_Jacks]

LOL. OK "QOC" Does this new handle work for you? Found the above from Eleanor and her buds are close to mine. /cant help the double entands so please forgive me. Please

Ha!! EleanorR, it was. And thank you for the new handle.

 

[76bridget]

Hit the plus to multi quote all the posts you want to reply to - then go to the bottom and hit reply - and all the ones you quoted will auto fill in, and you can post your reply between them all.

TVet- the multi quote button is just to the right of 'reply with quote' at the bottom of each post. took me a while to find it also.

 

[EleanorR]

Hit the plus to multi quote all the posts you want to reply to - then go to the bottom and hit reply - and all the ones you quoted will auto fill in, and you can post your reply between them all.

TVet- the multi quote button is just to the right of 'reply with quote' at the bottom of each post. took me a while to find it also.

TexasVet, these ladies have got it covered!

(Who needs me anyway? Signed -- late arising Chopped Liver )

 

[76bridget]

Oh, one more thing TexasVet, you have to hit the '+reply to thread button' . Not the quick reply.

 

[DJLEC]

Vanilla Black Tea is a crowd favorite...Berry Shangri-La Tea, Ginger Apple Tea, and Orient Whisper

I was sad today to see my empty 10 ML Bottle of Vanilla Black Tea.

I will need to re-order this one in a pretty Blue Glass Bottle.

Hoping that I am not labelled " Vanilla " by Blacks_n_Jacks due to being a White Male that was transplanted in CA and originally from Canada

Thanks for the Bolded Items that were added to my future Wish List.

 

[clnire]

Kind off topic, but I pulled out my CWW today and decided I would try it in this little SM20 dripping atty I got from FT. WOW! The flavor was awsome!!! I love this stuff! So then I'm thinking "how will it be with a cotton wick?". I change/rebuild all my EVOD/Protank coils with cotton all the time. So I go to gently pull the factory wick out and guess I was not careful enough, I broke the coil. I took it apart and hummmm, how to rebuild??? I am new at rebuilding, pretty good with EVOD/Protank coils, but this? I looked all over the internet and found lots of videos for rebuilding Phoenix style attys, but this one has a little rubber grommet like the EVOD assemblies have. I took it apart too fast and did not note how it was set up. I know I wrap one end of the wire around the negative post and tighten the screw, but do I pull the grommet and thread the positive wire through like the EVODS? Or do I just wrap the wire, one end each, around the posts and tighten the screws? Of course I make a coil between the posts.... huh?????



I know this is not a coil building thread, but everyone is so helpful and I was vaping CWW so I thought I would ask.

 

[Jerms]

Kind off topic, but I pulled out my CWW today and decided I would try it in this little SM20 dripping atty I got from FT. WOW! The flavor was awsome!!! I love this stuff! So then I'm thinking "how will it be with a cotton wick?". I change/rebuild all my EVOD/Protank coils with cotton all the time. So I go to gently pull the factory wick out and guess I was not careful enough, I broke the coil. I took it apart and hummmm, how to rebuild??? I am new at rebuilding, pretty good with EVOD/Protank coils, but this? I looked all over the internet and found lots of videos for rebuilding Phoenix style attys, but this one has a little rubber grommet like the EVOD assemblies have. I took it apart too fast and did not note how it was set up. I know I wrap one end of the wire around the negative post and tighten the screw, but do I pull the grommet and thread the positive wire through like the EVODS? Or do I just wrap the wire, one end each, around the posts and tighten the screws? Of course I make a coil between the posts.... huh?????

View attachment 310820

I know this is not a coil building thread, but everyone is so helpful and I was vaping CWW so I thought I would ask.

Yep, just wrap around the posts and tighten the screws. The drippers with the holes in the posts to put the legs through are easier, but this one's doable.

I have three differenct ERA clones like the one you have pictured, and the one without the holes in the post also had that rubber grommet thingy there. It's meant to insulate the positive post, but makes no sense why it's sticking up so high. You don't want any wire touching it or very close, it burns easily. I suggest pushing it down into the base as much as possible and cutting it down with a box cutter/razor/knife so the insulator is flush with the base.

 

[Jerms]

Here's a picture of mine..

 

[Blacks_n_Jacks]

I was sad today to see my empty 10 ML Bottle of Vanilla Black Tea.

I will need to re-order this one in a pretty Blue Glass Bottle.

Hoping that I am not labelled " Vanilla " by Blacks_n_Jacks due to being a White Male that was transplanted in CA and originally from Canada

Thanks for the Bolded Items that were added to my future Wish List.

LOL, no, I won't call you that....unless you want to be called that.

But, I must know which of the following fruit creams you subscribe to?????

A) Lemon Cream

B) Lemon Cream

C) Lemon Cream

D) I like bacon and waffles, but I love Lemon Cream

 

[Blacks_n_Jacks]

Yep, just wrap around the posts and tighten the screws. The drippers with the holes in the posts to put the legs through are easier, but this one's doable.

I have three differenct ERA clones like the one you have pictured, and the one without the holes in the post also had that rubber grommet thingy there. It's meant to insulate the positive post, but makes no sense why it's sticking up so high. You don't want any wire touching it or very close, it burns easily. I suggest pushing it down into the base as much as possible and cutting it down with a box cutter/razor/knife so the insulator is flush with the base.

OMG, I can't stand that atty, but I used it faithfully, probably because of its small size. The last juice I had in it was Peach Wild Wood.

 

[new kid]

Here's a picture of mine..

What ever possessed them to make these with rubber? I have a few myself - they are all sitting around for spare parts. The rubber left a horrible taste even when it was not burnt.

 

[clnire]

Here's a picture of mine..

Thanks Jerms!!! Just exactly what I needed!

OOPs, edited to give credit where credit due....