Airflow Kayfun style

[etchie]

I'm looking at a few authentic mods but I'm only getting one. The mods are:
kayfun 3.1
KFL+
Russian 91%
Aqua

the KFL isn't on the list because I know it has the tightest draw and I'm looking for the opposite. Anyone know which of these can achieve the airiest draw? I'd i had to guess, I would say it's the aqua, but I really don't know. Thanks in advance!

 

[Mark Howard]

All of the kayfuns are similar, as is Russian. Not familiar with aqua, but for the same reasons as you I just got a SQuape bc you can open it up. I drilled mine to 1/16" and it is just awesome! Hope I still like my kfl+ when I pick it up next...


Sent from my iPhone using Tapatalk

 

[vapdivrr]

the aqua tank (not mod btw) will be the one. it has an adjustable airflow that opens quite a bit. there are other factors involved as well as airflow you might want to check out as well. out of all the ones you mentioned, the aqua may be the most time consuming to set up because its dual coil design. I have tried it as a single and it just doesn't perform as well. being its a dual coil design it will be lower in resistance to all the others, your looking at .6 or lower for it to really perform, for me .4 is where it shines. another factor, if it matters to you is juice capacity, out of all the ones in your list the aqua has the least at 3mls. I own all but the Russian and all are awesome tanks but if I had to keep just one it would be the REO! just kidding. I love all of them for different reasons, that's why I have them all. also the aqua is the smallest in diameter at 21mm.

 

[proteckt3d]

Something to add, in the kayfun system the amount of eliquid entering the chimney depends on the air draw and when its opened up too much you might notice that not enough eliquid is reaching the wicks and not get the vape experience the atty can offer. I've started with mine fully open and tightened it down until I was satisfied with the vape.

 

[etchie]

All of the kayfuns are similar, as is Russian. Not familiar with aqua, but for the same reasons as you I just got a SQuape bc you can open it up. I drilled mine to 1/16" and it is just awesome! Hope I still like my kfl+ when I pick it up next...


Sent from my iPhone using Tapatalk

Have you removed the glass from your squape by chance? I have the clone that I've only used twice because the glass (or whatever it is) came out and all my juice came out of the holes. Before that though, it was awesome. I know the inside base is changing colors on people don't know what it's made of or if it's dangerous so I won't be using it until I find out, but I wanted to know if you knew how to get it back in there. There were two o-rings involved, but I don't see how that could be the only thing holding it in. I know it's removable because I saw the glass for sale by itself.

 

[Mark Howard]

Have you removed the glass from your squape by chance? I have the clone that I've only used twice because the glass (or whatever it is) came out and all my juice came out of the holes. Before that though, it was awesome. I know the inside base is changing colors on people don't know what it's made of or if it's dangerous so I won't be using it until I find out, but I wanted to know if you knew how to get it back in there. There were two o-rings involved, but I don't see how that could be the only thing holding it in. I know it's removable because I saw the glass for sale by itself.

I haven't had any issues or tried to remove it. I've heard certain juices deteriorate both it and many tanks of similar material, but I don't happen to use those kinds of juice, lucky for me. I have heard of the replacements, isn't there one that's Pyrex now? Mines not a clone but it is also done kind of plastic. I think Rip discussed it in his vid.


Sent from my iPhone using Tapatalk

 

[etchie]

I haven't had any issues or tried to remove it. I've heard certain juices deteriorate both it and many tanks of similar material, but I don't happen to use those kinds of juice, lucky for me. I have heard of the replacements, isn't there one that's Pyrex now? Mines not a clone but it is also done kind of plastic. I think Rip discussed it in his vid.


Sent from my iPhone using Tapatalk

Yeah, he discusses it. I don't remember where, but there a couple places that I've seen that carry it. It's $10 in case you're ever in need of it.

 

[EvilBetty]

Debate for me as well. I keep waiting for the "next RBA" because I can't find one that matches my preferred vape.

I like warm airy vapes. And using my brother's Kayfun Lite +, it's just too tight.

I hear the Aqua is leak prone and guzzles juice. Juice consumption makes sense with dual coils.

I also don't yet have a mechanical; I use a Vamo primarily.

Anyone used either with XC116? I hear it wicks better.

 

[VapoJoe86]

I own the KFL+ and an aqua clone. The aqua has a way more open draw... The KFL+ has a TIGHT draw by comparison.