Alternating Kanger T3 With Different Flavors

[KySky]

Hello Group,
Trying to wrapmy mind around the fact of how I'm supposed to alternate my different flavorswith these Kanger T3’s? I’m new currently using Volt V2 with 8 different KangerM3’s and looking to upgrade Ego C Twist with Kanger T3’s.

The way Iunderstand it, and please correct me if I’m wrong, but the T3 tubes are supposedto last a really long, long time and all that really needs replaced are the “Heads”which are the coil/atomizer units. If I wanted to vape 3 or 4 different flavorsduring the week, would it be best to buy separate T3’s for each flavor or simplyempty the remaining juice from the T3 tube and designate one of the replacementheads for that particular flavor only and just rotate the heads out as I changeflavors?

How do you allrotate flavors out with these T3’s?

 

[Dysmay]

Just like with any tank/clearo type device, you either have multiple so you can quickly unscrew and screw on another to change the flavor, or dump the juice like you said and refill as needed. I used to drip all the time and change flavors almost as soon as I got a dry hit, but having a tank mod now and only one of them, I now stick to one flavor until its empty or if the flavor is meh, dump it out or pour it back into an empty bottle to use again later. Hope this helps.

 

[Yokymo]

I'm about to try to change juice on mine, probably today, i bought extra coils, cause im thinking bout cleaning mine out (using the some of the methods posted on how to clean it) and see what happens.. I have a MT3 and 2 baby's for the just incase i mess something up somehow. But yea i would probably look into a back up T3 and look up how to clean them.

 

[KySky]

Just like with any tank/clearo type device, you either have multiple so you can quickly unscrew and screw on another to change the flavor, or dump the juice like you said and refill as needed. I used to drip all the time and change flavors almost as soon as I got a dry hit, but having a tank mod now and only one of them, I now stick to one flavor until its empty or if the flavor is meh, dump it out or pour it back into an empty bottle to use again later. Hope this helps.

Thanks Dysmay. I'm currently considering dripping but only for sampling different flavors not going through the whole day. To save time and hassle I guess buying T3's for each flavor is the easiest way to go. Thank for the help.

I'm about to try to change juice on mine, probably today, i bought extra coils, cause im thinking bout cleaning mine out (using the some of the methods posted on how to clean it) and see what happens.. I have a MT3 and 2 baby's for the just incase i mess something up somehow. But yea i would probably look into a back up T3 and look up how to clean them.

I've not gotten this far in my vaping journey. What's the purpose of cleaning these "Tubes/Chambers" (not the heads/coils) if you only using one flavor? Do they gunk up over time or something?

 

[Dysmay]

Juice can over time gum up, so cleaning may be needed, and if cleaning doesnt help, just replace the atty/coil bottom piece on that model. But in a best case scenario you just unscrew the tank top when its empty and refill like normal the first few times.

 

[Beretta]

I've found with the kanger T3, that if I change the flavors, don't need to clean it first. The wicks will eventually have no choice but to suck in what's available. In several puffs, you should have your new flavor there.

With that said, I have 1 Kanger T3 for each flavor I vape, and I always have bottom coil backups (2.5ohms).

 

[Yokymo]

I actually cleaned mine today to see how hard it was to clean. and to see how they were to take apart and all. but in reality it depends on the juice you are using i could see you just rinsing and refilling. Maybe some darker heavier juices or some that may leave lingering tastes, you may wanna clean, but yea, in most cases i would say a rinse and maybe a quick dry burn (up to you) and you would be ok.

 

[KySky]

I have 1 Kanger T3 for each flavor I vape, and I always have bottom coil backups (2.5ohms).

This evening I just ordered my ego C Twist with an T3 that comes with 2.5ohm and an extra had 1.5ohm. I don't know if i will notice any significant difference in flavor and vapor between the two heads but I'll see.

....... in most cases i would say a rinse and maybe a quick dry burn (up to you) and you would be ok.

How to you perform a quick dry burn?

 

[crxess]

Grab a hand full of Kanger T3 mini's. Swap as often as you like. I normally have up to 10 kangers/clearo's/Ce2 v4 filled at any given time. I rarely Vape the same flavor more than an hour at a time.
Heads take time ot break in and reach full flavor. Cleaning starts the process all over again.