Am I doing somethingh wrong with my Woodvil?

[swamijivan]

Hi vapers...
I had my Woodwil one week ago an I like it so much.. The only problem I've got is with the attys..
I bought some cisco 306LR and they work well..for a day or two. After they make much less vapour, so I try to clean it up (hot water and overnight drying) priming and they work well for few hours only.
I am new with PV's so is possible I am doing something wrong with sqonking: I squeeze gently the bottle until I can see a little amount of liquid in my (transparent) drip, the I release the bottle and vape, until less vape come out.. and I repeat. Is not about battery charge.. with my third new 306 (just one week from beginning!) all seems good with the same batt. Is possible that I received some faulty atty from ivapour.co? Or I am doing mistakes in my way?

Another question... I read somewhere Reo's working at 6V..mine is 3.7, is a trick or a different model? Thanks for advices...cheers!

 

[redeyedancer]

I would try another brand of atomizer you may have just got a few bad attys it happens.

 

[pianoguy]

I got a couple sketchy Cisco LR306's with a recent order - one lasted only a few days, and another had one of the air holes plugged, but at least it is still working after about 10 days. I usually blow hot water through mine every night with a bulb syringe, and typically they last me at least a month.

 

[unsure]

Hi vapers...
I had my Woodwil one week ago an I like it so much.. The only problem I've got is with the attys..
I bought some cisco 306LR and they work well..for a day or two. After they make much less vapour, so I try to clean it up (hot water and overnight drying) priming and they work well for few hours only.
I am new with PV's so is possible I am doing something wrong with sqonking: I squeeze gently the bottle until I can see a little amount of liquid in my (transparent) drip, the I release the bottle and vape, until less vape come out.. and I repeat. Is not about battery charge.. with my third new 306 (just one week from beginning!) all seems good with the same batt. Is possible that I received some faulty atty from ivapour.co? Or I am doing mistakes in my way?

Another question... I read somewhere Reo's working at 6V..mine is 3.7, is a trick or a different model? Thanks for advices...cheers!

Some mods can use different batteries to achieve different voltages....some not the REO yet have the ability (VV mods) to control the voltages

 

[mlinky]

Your "squonking" technique sounds good, it's probably the attys. My Cisco LR 306's need to be blown out once a day, no matter what mod you use them on. I LOVE them on my Mini, so I put up with it, and they also keep the overflow well nice and dry. I prefer using 510's on my Woodvil because they are not quite as finicky, and the Woodvil has a nice deep overflow. So, I'd say try some 510's.

The Grand will accomodate a 5v and 6v set up, using different batterys. With the Woodvil, you are better off sticking with the 3.7v battery.

 

[Rhapsodies Fire]

I agree...try some different atties on your woodvil. once you find the right atty for you, you won't need to go 6v, IMO. For me, keeping my atties wet (plenty of juice) seems to have made them last longer.

 

[Chelseafn]

I agree with everything said. However I have noticed when I use VG the 306's tend to have less vapor production over time. I clean mine 2 times a week. I use 100% VG. They work fine for me. You may want to try some juice with a higher PG ratio. Just a thought.

 

[dokebilee]

Most (If not all) VG liquids will wear down atomizers, especially LR 306's, and this is because they are thicker and thus it gunks up the coil faster. My suggestion is to switch to PG liquid as they are thinner, or use LR 510's, as they will last a bit longer due to a wider inner area but you will also notice a difference in flavor and vapor production between the two different atomizers.

This is a problem that I dread mostly since I can only use VG liquids because of the allergies interlinked with PG and myself. All I can say is, good luck, and sometimes you will get a lucky atomizer that can handle the pressure well while others can't.

 

[swamijivan]

Most (If not all) VG liquids will wear down atomizers, especially LR 306's, and this is because they are thicker and thus it gunks up the coil faster. My suggestion is to switch to PG liquid as they are thinner, or use LR 510's, as they will last a bit longer due to a wider inner area but you will also notice a difference in flavor and vapor production between the two different atomizers.

This is a problem that I dread mostly since I can only use VG liquids because of the allergies interlinked with PG and myself. All I can say is, good luck, and sometimes you will get a lucky atomizer that can handle the pressure well while others can't.

Thanks folks! I allready vape PG.. and ordered some LR501, then it seems I'am doing right things (until now ;-) ) cheers to all!

 

[mlinky]

Thanks folks! I allready vape PG.. and ordered some LR501, then it seems I'am doing right things (until now ;-) ) cheers to all!

That's great! If you try them, and still have problems, remember, we're here for you!