Anyone here used fasttech.
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
I'm not too sure now mate, I've been checking out some other posts and doing a bit of research. It seems the FT might be a bit too good to be true. The materials used are totally different from the ithaka. Think I'll keep it in my wishlist for now and wait til someone else buys it first. I know, I'm a coward
I've heard plenty of good things about the Vamo v3 from FT. From what I've heard the stainless one is the best one to go for.
Good choice there
LOL i know the exitement is too much to bear,
But i asked you what DATE you ordered
I'm not too sure now mate, I've been checking out some other posts and doing a bit of research. It seems the FT might be a bit too good to be true. The materials used are totally different from the ithaka. Think I'll keep it in my wishlist for now and wait til someone else buys it first. I know, I'm a coward
Not a coward Ian,
I like to say a careful christian. That hard earned money can go towards sommat else.
Sorry read date as 'did'...doh! Ordered on the 22nd so a couple of weeks and should be good to vape on
First of all the V5,cleaned it out and did a few dry burns, loaded it with liqua tiramisu and nice throat hit, but not much vapour.
I lifted the coils up in line with the airhole,and what a massive cloud difference, WOW. And all the flavour of the juice is coming through beautifully. I may have to get the airhole drilled out a little cos the draw is a bit tight,but hey, i can live with it. For the price i would give it ten out of ten, Fantastic.The hex key is tiny, so i will have to be careful with that, but that is the only negative to it. A fab little dripper,The stock coil read .9 ohms. The tiramisu is gorgeous,and will now be my first vape of the day alongside my coffee. I have got four more liqua juices to try yet so will report back in good time, Ah... good time is what i am having right now.
Last edited:
Nice one Terry, this morning i had to spend some more so bagged a V10 and an Oddy from FT. for the price it just had to be done. Hopefully it will all turn up together so i can jump straight to the drip.
Well got my liqua and V5 dripper from ft today, and here is the low down.
First of all the V5,cleaned it out and did a few dry burns, loaded it with liqua tiramisu and nice throat hit, but not much vapour.
I lifted the coils up in line with the airhole,and what a massive cloud difference, WOW. And all the flavour of the juice is coming through beautifully. I may have to get the airhole drilled out a little cos the draw is a bit tight,but hey, i can live with it. For the price i would give it ten out of ten, Fantastic.The hex key is tiny, so i will have to be careful with that, but that is the only negative to it. A fab little dripper,The stock coil read .9 ohms. The tiramisu is gorgeous,and will now be my first vape of the day alongside my coffee. I have got four more liqua juices to try yet so will report back in good time, Ah... good time is what i am having right now.
Doing a bit of sub-ohm vaping then mate. I bet if you do drill out the air hole, there will be a permenant fog over Duki - the firebrigade may even get called
Did you use the stock coil in the v5 ?
I've been looking at the Liqua for when I cut down on nicotine eventually, FT only seem to have 24mg in the tobacco flavours, I don't do tobacco juices
My latest order should be here soon, it went on the plane 2 days ago
some nice choices there moose,
I think i will add a couple more drippers to my next order.
I need to get this airhole drilled out though, To get a looser cooler vape, and some lower nic.
My lungs are on fire lol, I have had to put it down for a bit.
Doing a bit of sub-ohm vaping then mate. I bet if you do drill out the air hole, there will be a permenant fog over Duki - the firebrigade may even get called
Did you use the stock coil in the v5 ?
I've been looking at the Liqua for when I cut down on nicotine eventually, FT only seem to have 24mg in the tobacco flavours, I don't do tobacco juices
My latest order should be here soon, it went on the plane 2 days ago
Yes, i just used the stock coil mate. I will get it running even better when i put my own in. i have been trying the turkish tobacco tonight, and although it tastes nice 18 mg is just too high. A proper lung burner, what have you got coming your way this time Ian ?
You've got me motivated to do some more coils with my aga t2 now Terry. Might try cotton this time, so far I've only used silica, but the results haven't been great so far. I'm gonna get a dripper next order, I've made my mind up now. If the vape is as strong as you say, it might be an easy way to get into lower nicotine for me.
The order I'm waiting on is the KTS+ with an x9 Protank and some 18350 batteries mate. I've ordered the batts for when my new bagua comes through from the co-op I told you about. I'm hoping I might be able to use the bagua in shorty mode for work, when I fancy a change from the Vmod
You've got me motivated to do some more coils with my aga t2 now Terry. Might try cotton this time, so far I've only used silica, but the results haven't been great so far. I'm gonna get a dripper next order, I've made my mind up now. If the vape is as strong as you say, it might be an easy way to get into lower nicotine for me.
The order I'm waiting on is the KTS+ with an x9 Protank and some 18350 batteries mate. I've ordered the batts for when my new bagua comes through from the co-op I told you about. I'm hoping I might be able to use the bagua in shorty mode for work, when I fancy a change from the Vmod
Have you got the link for them 18350`s mate,
The ones i have are no good for mech`s, so i could do with getting some.
When you order your dripper Ian definately get one with 2 or three airholes. The V5 only has one and it`s tiny, i am going to ask my brother (an engineer) to increase the airhole,and put another one in.
I have just been checking on the rba threads, and as mine is dual coil, it should have one airhole for each coil.
So just a heads up. Tomorrow i will build a single coil for it and see how it is, Till i get it drilled out .
Have you got the link for them 18350`s mate,
The ones i have are no good for mech`s, so i could do with getting some.
When you order your dripper Ian definately get one with 2 or three airholes. The V5 only has one and it`s tiny, i am going to ask my brother (an engineer) to increase the airhole,and put another one in.
I have just been checking on the rba threads, and as mine is dual coil, it should have one airhole for each coil.
So just a heads up. Tomorrow i will build a single coil for it and see how it is, Till i get it drilled out .
I've just ordered the trustfire protected 18350's. I know a lot of people don't really rate them, but to be honest the 14500's I got for my Vmod weren't given the best reviews - but they've worked just fine for me. Here's the link mate, FT only sell about 3 types of 18350 from what I could see:
https://www.fasttech.com/products/1156600
Thanks for the info on the airholes, I have noticed that my FT Evods have a tighter draw than the "genuine" Evod that I have. All my FT Evods have 2 holes, the dearer one I've got has 3 holes.
That's the thing though with FT, it's that cheap I don't mind doing some modding to the stuff, I've got a pretty good drill and drill bit set (about 300 pieces in total in a big carry case), so if I have to open the airholes out it's not a problem. I'll just get the Wife to hold the atty, while I drill it
I've just ordered the trustfire protected 18350's. I know a lot of people don't really rate them, but to be honest the 14500's I got for my Vmod weren't given the best reviews - but they've worked just fine for me. Here's the link mate, FT only sell about 3 types of 18350 from what I could see:
https://www.fasttech.com/products/1156600
Thanks for the info on the airholes, I have noticed that my FT Evods have a tighter draw than the "genuine" Evod that I have. All my FT Evods have 2 holes, the dearer one I've got has 3 holes.
That's the thing though with FT, it's that cheap I don't mind doing some modding to the stuff, I've got a pretty good drill and drill bit set (about 300 pieces in total in a big carry case), so if I have to open the airholes out it's not a problem. I'll just get the Wife to hold the atty, while I drill it
LOL i love it mate,
I am just waiting for my bro to get back to me now.
Yeah i quite like the evods as they come mate. Thanks for the link i will get a couple of them.
Last edited:
Well I've just ordered another 6 juices and some ego/510 adaptors. I want to look after the threading on my bagua when it arrives, so the adaptors should do the trick. Looked at the drippers, but the one I wanted was 3 days shipping, so I'll wait a while. I notice they do carry the V5 with 3 airholes, but that's 3 days shipping too. The only problem I can see is that it's dual coil, but all 3 airholes are on one side, guess that defeats the object of having multiple airholes - am I right in thinking this
Well I've just ordered another 6 juices and some ego/510 adaptors. I want to look after the threading on my bagua when it arrives, so the adaptors should do the trick. Looked at the drippers, but the one I wanted was 3 days shipping, so I'll wait a while. I notice they do carry the V5 with 3 airholes, but that's 3 days shipping too. The only problem I can see is that it's dual coil, but all 3 airholes are on one side, guess that defeats the object of having multiple airholes - am I right in thinking this
yes you are correct ian,
If i were you i would just go for a single coil.
What i did today was, replaced the dual coil with a single, 5 wraps gives me 2.1 ohms.
I managed to open the airhole to about twice the size, give it a pulse or 5, all loops glowing even.
Loaded it with berry mix, and i now have started a new love affair. It was good just as stock, but it is 100 times better now.
You know all them vids on you tube ? what show people blowing absolutely massive clouds ?
Well that is now me, i cannot imagine what it would be like with a dual coil and another airhole opposite. Bloody hell, i think The fire brigade would come out.
so to sum up, i am indeed a very very very happy man right now. I think this would be a good entry level Ian http://fasttechcdn.com/products/139/1391101/1391101-1.jpg
Last edited:
- Status
Similar threads
- Locked
