Anyone here used fasttech.

[Pictor]

Brilliant 2200 should easily last you a full day trish, in fact it will, even if you vaped really heavily with it

It's just what I was looking for! Small, good capacity fixed battery, and rather nice to look at! Just hope it lives up to expectations

Only negative so far is that the red one is more of a pinky/lavender red ....I don't do pink!

 

[terry w]

It's just what I was looking for! Small, good capacity fixed battery, and rather nice to look at! Just hope it lives up to expectations

Only negative so far is that the red one is more of a pinky/lavender red ....I don't do pink!

Oh stop already I can always send you some spray paint

 

[Pictor]

Oh stop already I can always send you some spray paint

I ordered a blue one!

 

[Bobw1951]

I just got 10 ml trish, as i always do with a new one Are you trying to suggest i bulk buy sometimes Eh, and guess what i have got red squiggly lines now.

Perhaps, just going into the settings turned it on, as I said it should work if you right click on the word that has a squiggly line under it you should get some options, such as the correct spelling, add to dictionary etc.

 

[Bobw1951]

It's just what I was looking for! Small, good capacity fixed battery, and rather nice to look at! Just hope it lives up to expectations

Only negative so far is that the red one is more of a pinky/lavender red ....I don't do pink!

I thought all girls do pink - pink for girls, blue for boys - any colour as long as it's not green....

 

[Pictor]

I thought all girls do pink - pink for girls, blue for boys - any colour as long as it's not green....

I don't actually mind the type of pink on that eleaf, but it's not my first choice.
Never did go for the 'girly pink' stuff.

Blue has always been my favourite colour, particularly red biased ones, but like you, I do like the turquoise shades as long as they aren't too bright.

 

[turnippits]

Hi this is Tom again just got home from the hospital and there is no change at the moment except his blood pressure has got lover the Drs are monitoring it but have told me not to be to concerned but I cannot help it as I don't know why his blood pressure is dropping

on a brighter note Ron has a lot of close friends around here he is very well liked and a cabinet maker has told me he will make Ron a mahogany box mod he has the design as his boss vapes and they made one 6 months ago but they need a top screw cap the one with the thread in told you I don't know what I am talking about and they need some copper plate they don't need a lot and I don't have any measurements but I do know it needs to be 0.5mm - 1mm thickness don't know why they need that but maybe for the connections if anyone knows where I can get some
I was thinking of maybe a plumbing supplies and buying a copper pipe and splitting it with a dremel and flattening it out with a rubber mallet as I think that might work if I can find a rubber mallet
but I do know they cannot do anything until they get the screw top thing so I will have to go and look for the impossible

I will try and keep you informed Tom

 

[Bobw1951]

Hi Tom, thanks for the update, maybe his BP was a bit high, so it getting lower might mean that he is now normalising, as for the connector, the best ones on the market are from a US firm called FatDaddyVapes, under Hardware, it's the 510 Connector v3, pick the Wood Box ones depending on whether you need the locking ring or not.
Might be somewhere local that does the copper plate, local ironmongers may be able to point you in the right direction.

 

[Bobw1951]

Had some new wire delivered so thought I would try some out, this comes in @ 0.5 ohm, 7 wraps of 22AWG round a 3.5mm rod using Muji cotton pad and vapes well at 20w, what'd ya think:

 

[turnippits]

thank you for your replies Bob I will tell the cabinet maker what you have told me and hopefully they can sort something out quickly as postage from America can be very slow at times but not always
never thought of ironmongers to be honest but to tell the truth I haven't been able to think about anything lately
I don't know what his blood pressure was before it dropped or even what it I now but the nurse did tell me it is low now enough for it to be monitored every 30 minutes they are trying to find a machine to put him on automatic monitoring and should have one within the next couple of hours

 

[dw117]

Had some new wire delivered so thought I would try some out, this comes in @ 5 ohm, 7 wraps of 22AWG round a 3.5mm rod using Muji cotton pad and vapes well at 20w, what'd ya think:

Looks nice, do you mean 0.5 ohms?

 

[Bobw1951]

Hahahaha, yes, I have edited my post to show 0.5, just finished my EHPRO KFL at 1.2 ohm 26AWG on 3mm pole (think it was 8/9 or 9/10 wraps) with some Rayon in it, find these beefier wires easier to work with, always had problems with the thinner stuff.

 

[Bobw1951]

thank you for your replies Bob I will tell the cabinet maker what you have told me and hopefully they can sort something out quickly as postage from America can be very slow at times but not always
never thought of ironmongers to be honest but to tell the truth I haven't been able to think about anything lately
I don't know what his blood pressure was before it dropped or even what it I now but the nurse did tell me it is low now enough for it to be monitored every 30 minutes they are trying to find a machine to put him on automatic monitoring and should have one within the next couple of hours

Last order I got from them took 6 days from order to home, quicker than some UK orders that I've placed, sounds like his BP has gone a bit too low, but that could be down to him not coming out of his coma yet.

 

[dw117]

Hahahaha, yes, I have edited my post to show 0.5, just finished my EHPRO KFL at 1.2 ohm 26AWG on 3mm pole (think it was 8/9 or 9/10 wraps) with some Rayon in it, find these beefier wires easier to work with, always had problems with the thinner stuff.

Yes I have 25, 28, 30 and 32 gauge kanthal and only ever use 25 and 28 now. Much prefer using 25ga in RDAs, it's just not very springy compared to thinner wire and if you build below about 0.8 ohm still heats up quickly enough for me. Will probably get some thicker stuff like 22ga to try out sometime, and maybe flat ribbon wire.

 

[Bobw1951]

I had some 28 and 30, so ended up getting a 10m reel of 22,24 & 26 from Stealthvape to try out for using with cotton or rayon I think they are perfect, the RDA in the pic is the Smok Caterpillar, only did a single coil on it, but it vapes real good dripping some Posset

 

[terry w]

Had some new wire delivered so thought I would try some out, this comes in @ 0.5 ohm, 7 wraps of 22AWG round a 3.5mm rod using Muji cotton pad and vapes well at 20w, what'd ya think:

Looking good bob.

 

[terry w]

Got some more stock today - 50 ml GVC, 50 ml SD&C, and the 10 ml of long shift. Although i haven`t tried the latter one yet, it looks like you were correct trish as it smells bloody good . As soon as i have finished this tank of RY4, probably tomorrow, i will give it a go.

 

[trouble1000]

I've started using 24 and 26 gauge a fair bit myself recently. I've found I don't need to torch it beforehand as it doesn't really take much of the springiness out. I just do the wraps, hold the coil legs tightly while I get the coil in the tweezers and then torch it. Must admit, it is a lot easier to wrap than thinner wire.

I never get red squiggly lines, cos my spelling is always perfect

-----------------------------

Good to have you back stalking Burnie

We're all still keeping our fingers crossed for Ron too.

----------------------------------

Terry, we watched the first episode of The Strain last night - it's worth watching mate, it's got Samwise Gamgee in it - you'll see what I mean if you watch it

 

[Bobw1951]

I've started using 24 and 26 gauge a fair bit myself recently. I've found I don't need to torch it beforehand as it doesn't really take much of the springiness out. I just do the wraps, hold the coil legs tightly while I get the coil in the tweezers and then torch it. Must admit, it is a lot easier to wrap than thinner wire.

Does seem a lot easier to work with

I never get red squiggly lines, cos my spelling is always perfect

that's because cos is a lettuce

Terry, we watched the first episode of The Strain last night - it's worth watching mate, it's got Samwise Gamgee in it - you'll see what I mean if you watch it

Been watching it from the beginning - yet another good series "Continuum" is back for S2 on Monday on Syfy

 

[terry w]

Terry, we watched the first episode of The Strain last night - it's worth watching mate, it's got Samwise Gamgee in it - you'll see what I mean if you watch it

Ah yes i think he`s called sean astin, sommat like that. I will watch it on catch up mate cheers, Just recording the third episode of the leftovers, and if i am honest, can`t make head nor toe of it.

On a separate note the rayon with the SD&C ! I dunno what it is but i can only run about 7 ml through the tank and i am having to dry burn again, When i used cotton i could normally get away with about 15 ml. Any ideas mate.