Anyone here used fasttech.

[lisancentraltx]

No problem lisa,

Just in case you have forgot, take your atty off then with the battery in; tighten everything down real good and that should push the pin back up.

Bwahahahahaha!

VAPES! Whoo Hoo!!!!!!!! I present to you,

My Precious - fasttech Pisces topped by the Fastteck 2.5ml ATTY and her tips

 

[trouble1000]

Bwahahahahaha!

VAPES! Whoo Hoo!!!!!!!! I present to you,

My Precious - fasttech Pisces topped by the Fastteck 2.5ml ATTY and her tips

Result

I like the set up on the right best - are we having a vote ??

 

[lisancentraltx]

My Precious - fasttech Pisces topped by the Fastteck 2.5ml ATTY

PM coming about the bottles

I changed my mind about the mesh :/ I have to do SUPER QUICK button push or it burns. Vape is different, seems like juice is heavier in the vape, bigger flavor molecules in the mouth... I like to hold the button down for a bit to take a looooooooooooong vape, so I will change the mesh out this weekend.

 

[terry w]

That's what I was thinking mate, might as well hold on for them to arrive. It's the all silver ones that I ended up getting, the blue and red ones had a long lead time, so we all ended up getting the plain ones in the co-op instead.

LOL i was going to request a silver one anyway mate.

 

[terry w]

Bwahahahahaha!

VAPES! Whoo Hoo!!!!!!!! I present to you,

My Precious - Fasttech Pisces topped by the Fastteck 2.5ml ATTY and her tips

Well done lisa,

They look really smart them.

 

[terry w]

Result

I like the set up on the right best - are we having a vote ??

yep right for me also,

That is one sexy tip.

 

[trouble1000]

I changed my mind about the mesh :/ I have to do SUPER QUICK button push or it burns. Vape is different, seems like juice is heavier in the vape, bigger flavor molecules in the mouth... I like to hold the button down for a bit to take a looooooooooooong vape, so I will change the mesh out this weekend.

That's why I don't like the mesh. Never had any success with it, it always tastes a bit metallic to me, no matter what I do with it

 

[itsrayray]

I think I'm going to get on of those atty now. After seeing it on your magneto, looks like a great match. But I think I'm going to have to coil higher than sub ohm, or it won't wick fast enough for me.

Or maybe I'm just doing something wrong. I have this rsst right here, just chilling because of wicking issues. I never had a problem with any geni on my vamo though. Maybe sub ohm should just be left for drippers.

 

[terry w]

I think I'm going to get on of those atty now. After seeing it on your magneto, looks like a great match. But I think I'm going to have to coil higher than sub ohm, or it won't wick fast enough for me.

Or maybe I'm just doing something wrong. I have this rsst right here, just chilling because of wicking issues. I never had a problem with any geni on my vamo though. Maybe sub ohm should just be left for drippers.

Yes ray,

If you get a coil at about 1.8 it should be perfect, i usually run my drippers around 1.4

 

[lisancentraltx]

I think I'm going to get on of those atty now. After seeing it on your magneto, looks like a great match. But I think I'm going to have to coil higher than sub ohm, or it won't wick fast enough for me.

Or maybe I'm just doing something wrong. I have this rsst right here, just chilling because of wicking issues. I never had a problem with any geni on my vamo though. Maybe sub ohm should just be left for drippers.

I'm just vaping with the mesh coil setup that Fasttech installed. When I am ready to replace it, I'll put in a regular 1.2-1.6 coil =] just have to look at the videos to see where to wrap the wire XD Oh, by the way, for the Fasttech ATTY, I had to remove a screw - that's the only hole to get juice in the tank

 

[itsrayray]

I guess I just had this misconception in my head that sub ohm = better vape.

 

[lisancentraltx]

I guess I just had this misconception in my head that sub ohm = better vape.

That is what people have been doing recently, Ray. I can't get a reading on the ATTY, so it is a sub-oHm, but it's burning with anything more than a quick button tap. I like long draws and long button pushes, so I'll head back to my 1.6 coils to be safe =]

 

[terry w]

I guess I just had this misconception in my head that sub ohm = better vape.

I think low ohms are fine in a RDA, But i like to go higher in a RBA.

 

[terry w]

That is what people have been doing recently, Ray. I can't get a reading on the ATTY, so it is a sub-oHm, but it's burning with anything more than a quick button tap. I like long draws and long button pushes, so I'll head back to my 1.6 coils to be safe =]

Or even a touch higher lisa,

For a RBA anything between 1.6 - 2.4 should give you a perfect vape.

 

[trouble1000]

Or even a touch higher lisa,

For a RBA anything between 1.6 - 2.4 should give you a perfect vape.

To be honest if you've got adjustable volts/watts it doesn't really matter what ohms your running, you can play with the volts/watts to get the sweet spot.

Sub-ohm doesn't really do it for me either. Did a 0.7 ohm coil a while back, loads of vapour but hardly any flavour, nearly coughed up a lung

 

[trouble1000]

Well I've just loaded up a couple of Evods with some of the Liqua.

Currently vaping the berry mix. You're right Terry does taste like vimto. I'm using a cotton wick too for extra flavour

 

[terry w]

Well I've just loaded up a couple of Evods with some of the Liqua.

Currently vaping the berry mix. You're right Terry does taste like vimto. I'm using a cotton wick too for extra flavour

You should try dripping with it Ian, It is scrumptious mate !!!

 

[lisancentraltx]

I tried vaping the Fasttech 'Cocktail' juice last night and it wasn't very good XP Tasted like some old wine about to flip into vinegar that a relative tries to pass off around the holidays. I don't know if I should steep it or mix it

 

[trouble1000]

You should try dripping with it Ian, It is scrumptious mate !!!

I need to re-coil my drippers mate, so I'm using my back-up sampling Evods from FT

 

[trouble1000]

I tried vaping the Fasttech 'Cocktail' juice last night and it wasn't very good XP Tasted like some old wine about to flip into vinegar that a relative tries to pass off around the holidays.

Try adding a bit of lemon juice to it Lisa, a few drops can sometimes even out the pH of a juice. In fact, I've heard some people use a few drops of vinegar too. Or just try it again after you've had a few, everything tastes better then