• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Anyone here used fasttech.

Status
Not open for further replies.

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Indeed my Vamo V2 works perfectly with the Aga T2 sat on top!
1.19 ohms, you should defo get a resistance reading on the Vamo, but might be a touch low to fire her up, I tried a coil that read 1.1 and it wouldn't have it, I then tried a 1.8 ohm coil and fired her up nice and even. I've played about with higher and lower ohms and I like it around 1.8 best as it performs well on my mechs too, any higher and I don't feel the hit so good - but fine on Vamo cos you just crank her up!
The Aga T2 not only performs great with the vamo, but they look IMO as though they were made for each other - when the rest of my gear comes, the vamo and aga shall be pretty much permanently joined.
Let us know if your Vamo likes the Aga too :)

That's what I wanted to be cautious about, just offering it to someone who is genuinely interested by vv/vw devices but is on a tight budget and getting conned by someone who just wants to sell it on, I know it's shame on them but would rather genuinely help out someone on a budget than line the pockets of some skank!


Sent from my iPhone using Tapatalk

A match made in heaven the aga and Vamo ;)

I think I'm gonna have to thin my gear out a bit too. I'll probably stick it on the classies and see what happens. I'm keeping all the better stuff though :p

Thats why i gave up on the kayfun Ian,

It was supposed to ship in 12 days, and 15 days later still no movement. Its so bleeding annoying sometimes.

I honestly don't mind waiting mate. It's just the not knowing, that pees me off. I've got a good idea when the kayfun will be shipped though. I've just been checking out the reviews, they all seem pretty good so far, so I know it's worth waiting for.

I ordered a load of Liqua vanilla when I first started vaping and when it got boring, I mixed some into other flavours that I wasn't to keen on to sweeten them up a little bit. I don't vape tobacco's but I have read people recommending mixing vanilla with tobacco flavours.
You could also get some Joose Juice Apple Pie and make apple pie and custard!


Sent from my iPhone using Tapatalk

I love messing with flavours too, DIY and pre-mixed stuff. At the moment, I've got some Liqua Berry mix topped up with some Hangsen Pineapple in my KFL tastes really good :thumbs:
 

Manicmama

Senior Member
ECF Veteran
Oct 5, 2013
286
298
Tiverton, Devon, England
Ian, yep, just shout us mate - I'm great at doing fellas nails, my dad let me practice on him in return for a bevy when I were training lol.

Terry, I hate it when you can't have things exactly as you like them, it feels abnormal when I use mods with the little batteries (I'm having a blonde day thanks to toddler and puppy taking over my bed last night leaving me sleepless) as I'm so used to using the larger batteries.
Battery ordering is a must do tomorrow for me above all else now as one of my older protected ones decided to drop down to 3v earlier, so that's gone and I'll bet the ones bought at the same time are on the way out too - can't we invent a mod that you plug in and vape easy, only panicking when leaving the house or you forget to pay the leccy bill?

Lisa, I would be super grateful if you could mail me a few sets of spares, I'll look what I want tomorrow when I've slept and pm you so you can let me know how much with postage if that's alright?

Oh, and nice to have you back Codz !


Sent from my iPhone using Tapatalk
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Thanks Lisa, that's really kind. I'm pretty sure there will be somewhere over here that sells the parts separately. But if not, your offer really is appreciated. The Vari says "hi" by the way, it tells me it's very happy in it's new home. There were too many kangaroos in Aus, so it didn't want to stay there too long :laugh:



No problem mate. I bet the lack of delrin in the chi, is what caused the self-firing. I was a bit dubious about reversing the battery in my chi, but to be honest it worked just fine that way. I know this won't work with a Vamo or SVD, but with a mech, the tubing forms part of the circuit when it's fired, so it still works with a reversed battery. I'll have to see if I can get a nice thick delrin washer for the chi, all the other mechs I have, have them installed. But even the genuine chi-you doesn't have the insulator, seems a bit daft really.

Not only daft ian, but dangerous; for the matter of a cent or 2. If you find any insulators let me know mate, after tuesday evening I wouldn`t want to experience anything like that again. I am also looking for some more 18500 batteries, if you have got any links mate.
 

Manicmama

Senior Member
ECF Veteran
Oct 5, 2013
286
298
Tiverton, Devon, England
Thank you, Claire =] You described my issues PERFECTLY! I try for a 1.8oHm and when I get lower and close to subohms then AGA won't fire up on my other mods either! I certainly intend to test her on the Vamo tonight!

Which wire are you using? With 30ga kanthal I do 12 wraps on a 1.7 drill blank at get around 8 - I find it easier to wrap micro's than regular and micros give me really consistent readings.

I'll be shocked if it won't at least read the agas resistance and if it does but won't fire you know you just have to do a few more wraps so it'll fire - got my fingers crossed your vamo and aga fall in love like mine did!


Sent from my iPhone using Tapatalk
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Ian, yep, just shout us mate - I'm great at doing fellas nails, my dad let me practice on him in return for a bevy when I were training lol.

Terry, I hate it when you can't have things exactly as you like them, it feels abnormal when I use mods with the little batteries (I'm having a blonde day thanks to toddler and puppy taking over my bed last night leaving me sleepless) as I'm so used to using the larger batteries.
Battery ordering is a must do tomorrow for me above all else now as one of my older protected ones decided to drop down to 3v earlier, so that's gone and I'll bet the ones bought at the same time are on the way out too - can't we invent a mod that you plug in and vape easy, only panicking when leaving the house or you forget to pay the leccy bill?

Lisa, I would be super grateful if you could mail me a few sets of spares, I'll look what I want tomorrow when I've slept and pm you so you can let me know how much with postage if that's alright?

Oh, and nice to have you back Codz !


Sent from my iPhone using Tapatalk

Lol i know what you mean claire,

I am a bit of a perfectionist me, when i had the 18500 in the chi it was a perfect size for me. now both my 500`s are dead:( The one from tuesday is understandable, but the other i dunno why it`s gone. I have only had them a couple of weeks as well.
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Ian, yep, just shout us mate - I'm great at doing fellas nails, my dad let me practice on him in return for a bevy when I were training lol.

Lisa, I would be super grateful if you could mail me a few sets of spares, I'll look what I want tomorrow when I've slept and pm you so you can let me know how much with postage if that's alright?


Sent from my iPhone using Tapatalk

I'll let you do my toe nails Claire. You'll need a gas mask though :evil:

We could always do a joint order for aga parts, that might be easier, then post bits out from the UK. What do you think ??

Not only daft ian, but dangerous; for the matter of a cent or 2. If you find any insulators let me know mate, after tuesday evening I wouldn`t want to experience anything like that again. I am also looking for some more 18500 batteries, if you have got any links mate.

I got my 500s here mate:

AW 18490 IMR High Drain Battery

They say 490, but their the same as 500s mate.

They also do the efest 500s too :

Efest 18500 Button Top
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Which wire are you using? With 30ga kanthal I do 12 wraps on a 1.7 drill blank at get around 8 - I find it easier to wrap micro's than regular and micros give me really consistent readings.

I'll be shocked if it won't at least read the agas resistance and if it does but won't fire you know you just have to do a few more wraps so it'll fire - got my fingers crossed your vamo and aga fall in love like mine did.

Sent from my iPhone using Tapatalk

You're right Claire, both my Vamo and the SVD will both give sub-ohm readings, they just won't fire them.
 

Manicmama

Senior Member
ECF Veteran
Oct 5, 2013
286
298
Tiverton, Devon, England
Lol i know what you mean claire,

I am a bit of a perfectionist me, when i had the 18500 in the chi it was a perfect size for me. now both my 500`s are dead:( The one from tuesday is understandable, but the other i dunno why it`s gone. I have only had them a couple of weeks as well.

Ha ha, you sound like me for liking things a certain way!
Yeah the Tuesday batt was a given but strange your other didn't last either - did you get from person you've dealt with before for batts?
If you ain't found any by time I battery hunt in the morning I'll look out for 500's for you.


Sent from my iPhone using Tapatalk
 

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
Which wire are you using? With 30ga kanthal I do 12 wraps on a 1.7 drill blank at get around 8 - I find it easier to wrap micro's than regular and micros give me really consistent readings.

I'll be shocked if it won't at least read the agas resistance and if it does but won't fire you know you just have to do a few more wraps so it'll fire - got my fingers crossed your vamo and aga fall in love like mine did!

I'd been using the 32 gauge with 7/6 or 6/5 wraps for around a 1.6 - 2.1 oHm coil. I actually MELTED the wire on some toppers, so I moved up to a 28 and a 24 gauge. The only problem is the larger the wire diameter, the longer it takes to heat the wire and fire up the topper :/ I've got a 28 gauge on the AGA right now and she's firing well =]

Lisa, I would be super grateful if you could mail me a few sets of spares, I'll look what I want tomorrow when I've slept and pm you so you can let me know how much with postage if that's alright?

No problem, just let me know.
 
Last edited:

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Ha ha, you sound like me for liking things a certain way!
Yeah the Tuesday batt was a given but strange your other didn't last either - did you get from person you've dealt with before for batts?
If you ain't found any by time I battery hunt in the morning I'll look out for 500's for you.


Sent from my iPhone using Tapatalk

Yeah cheers claire,

AHEM, i got them off ebay AHEM. I will have to get sommat for this cough :D
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Well I've actually run out of Liqua berry mix now, but with all the shipping problems at the moment with FT, I think I'll wait til after chrimbo before I order any more.

I ran out a couple of weeks ago ian,

One of my fave vapes the berry mix, and i have got 60 ml in my wishlist but like you i will hang back till the new year.
 

Manicmama

Senior Member
ECF Veteran
Oct 5, 2013
286
298
Tiverton, Devon, England
I'll let you do my toe nails Claire. You'll need a gas mask though :evil:

We could always do a joint order for aga parts, that might be easier, then post bits out from the UK. What do you think ??



I got my 500s here mate:

AW 18490 IMR High Drain Battery

They say 490, but their the same as 500s mate.

They also do the efest 500s too :

Efest 18500 Button Top

Oh God, not another who wears same socks all year?! If your feet are half as bad as my brothers I'll have to refuse your pedicure on health and safety grounds!

Group buy for the spares makes sense to me, just let me know how we'll work it.

I've got four efest 18350 batteries and I find them good under heavy vaping on the mechs.


Sent from my iPhone using Tapatalk
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Right, I'm off to bed now.

Four days off for me now, but I do have to paint the bathroom and put up a new shower pole and re-seal the bath and whatever else "the Boss" wants me to do :(

Yep new bathroom suite for us next tuesday,

Then i will have to re-do most of the tiling, and full paint job. Busy few days for me next week.
 

Manicmama

Senior Member
ECF Veteran
Oct 5, 2013
286
298
Tiverton, Devon, England
Right, I've not slept for about 40 hours, the toddler just made a sneaky attempt to dive in my bed, managed to get him back to his own so gonna crash myself now with the hope I'll be comatose and oblivious should he attempt operation sneak Mama's bed again in a few hours!
Goodnight everyone!


Sent from my iPhone using Tapatalk
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Right, I've not slept for about 40 hours, the toddler just made a sneaky attempt to dive in my bed, managed to get him back to his own so gonna crash myself now with the hope I'll be comatose and oblivious should he attempt operation sneak Mama's bed again in a few hours!
Goodnight everyone!


Sent from my iPhone using Tapatalk

Night Ian, Night claire, Night lisa, Night cody,

Like the bloody waltons this.
 
Status
Not open for further replies.

Users who are viewing this thread