Anyone here used fasttech.

[Burnie]

So you have had a good day then mate ? I`ve done nowt today, a real lazy one. My intentions were to pet a new micro coil in my trident, but i just couldn`t be arsed.

EDIT: I wonder where claire and cody have got to I think your thread is losing it`s mojo mate

Been noticing it is getting a little slow on the posts, not much from Lisa either.

Ian, you setup the Fogger I sent yet? Is it defective or was it just me? Either way it was a PITA for me, hope it works for you.

Terry, you like the movie? I thought the end sucked, keeps you hanging for the 3rd movie.

vape On

 

[terry w]

Been noticing it is getting a little slow on the posts, not much from Lisa either.

Ian, you setup the Fogger I sent yet? Is it defective or was it just me? Either way it was a PITA for me, hope it works for you.

Terry, you like the movie? I thought the end sucked, keeps you hanging for the 3rd movie.

vape On

Yes i did burnie thanks, i thought it was a lot better than part 1. Better story line and special fx, yeah they always keep you hanging on for the next portion mate.

 

[trouble1000]

So you have had a good day then mate ? I`ve done nowt today, a real lazy one. My intentions were to pet a new micro coil in my trident, but i just couldn`t be arsed.

EDIT: I wonder where claire and cody have got to I think your thread is losing it`s mojo mate

To be honest I've not done much else vaping wise, apart from charge up some batteries. I've been catching up on some TV mostly today.

I think you've scared them off mate I hope they do show up again, I've got Claire's stuff here from Lisa (for the aga) and I'd like to know if Cody's tried any new juices and see some more of Lisa's new stuff. I hope they've just been too busy and that they haven't gone back on the coffin nails.

Been noticing it is getting a little slow on the posts, not much from Lisa either.

Ian, you setup the Fogger I sent yet? Is it defective or was it just me? Either way it was a PITA for me, hope it works for you.

Terry, you like the movie? I thought the end sucked, keeps you hanging for the 3rd movie.

Vape On

I've not had a play with the Fogger yet mate. I did intend to do it, but TV got in the way today I need to dig out my tools, so I can take the base apart too, check on the airflow.
I'll let you know my findings, but when I had a quick look at it, everything looked ok from the outside.

=============

I'll have to duck out now too - 12 hour day tomorrow, not looking forward to that. Same again on Tuesday and Friday. Work are trying to kill me off, cos I've got a weeks holiday due soon

 

[terry w]

To be honest I've not done much else vaping wise, apart from charge up some batteries. I've been catching up on some TV mostly today.

I think you've scared them off mate I hope they do show up again, I've got Claire's stuff here from Lisa (for the aga) and I'd like to know if Cody's tried any new juices and see some more of Lisa's new stuff. I hope they've just been too busy and that they haven't gone back on the coffin nails.



I've not had a play with the Fogger yet mate. I did intend to do it, but TV got in the way today I need to dig out my tools, so I can take the base apart too, check on the airflow.
I'll let you know my findings, but when I had a quick look at it, everything looked ok from the outside.

=============

I'll have to duck out now too - 12 hour day tomorrow, not looking forward to that. Same again on Tuesday and Friday. Work are trying to kill me off, cos I've got a weeks holiday due soon

That is what i am fearing mate, they have gone back to the ciggies. I hope we are both wrong.

 

[Burnie]

Work are trying to kill me off

Well for me here in Florida, Tuesday and Wednesday are going to kill me, temps are going to be in the low 30's with wind chill in the 20's, and I work outside Today was in the 80's, low tomorrow is mid to upper 60's, then getting colder during the day, 50 by afternoon. But by Thursday it will be in the upper 70's and Friday in the lower 80's, just have to suffer through the next few days of COLD.

Vape On
"vapor:

 

[terry w]

Well for me here in Florida, Tuesday and Wednesday are going to kill me, temps are going to be in the low 30's with wind chill in the 20's, and I work outside Today was in the 80's, low tomorrow is mid to upper 60's, then getting colder during the day, 50 by afternoon. But by Thursday it will be in the upper 70's and Friday in the lower 80's, just have to suffer through the next few days of COLD.

Vape On
"vapor:[/QUOTE
Get it out of the way burnie, It will soon be spring.

 

[Burnie]

[/QUOTE
Get it out of the way burnie, It will soon be spring.

This is the start of our winter here. Sometimes we get a cold December, but not often. Most times our Winter is January and February, then Most times starting to rise in March. I am used to HOT. 70"s are cool, 60's I wear a light jacket, 50's are COLD, below that I wear long underwear. Living in Florida, you get used to the Tropical weather, Cold really hurts, but I'll live, just won't like it. Wonder how the cold will affect my vaping? I quit for a few years and now that I started back I can't remember if I had problem before, well I guess I will find out in a day or so.

Vape On

 

[terry w]

This is the start of our winter here. Sometimes we get a cold December, but not often. Most times our Winter is January and February, then Most times starting to rise in March. I am used to HOT. 70"s are cool, 60's I wear a light jacket, 50's are COLD, below that I wear long underwear. Living in Florida, you get used to the Tropical weather, Cold really hurts, but I'll live, just won't like it. Wonder how the cold will affect my vaping? I quit for a few years and now that I started back I can't remember if I had problem before, well I guess I will find out in a day or so.

Vape On

Well it`s always cold in the uk burnie, and it doesn`t affect my vaping in any way mate.

 

[lisancentraltx]

I'm here, keeping up with the thread, just not doing much vape-wise. Went 3 weeks with no cigarettes in November to December and then hit a serious low and started smoking again. Fighting with those and back on MBV Cinnamon Red Hot. I've been slowly putting the XT-116 on my toppers so I can do dry burns right on the topper IF there's no plastic around. I'm still waiting on the rope, so once that comes in and I figure it out, I'll be using that as well.

Nothing else for me but getting used to a shift change, some new duties, and hanging on by my fingertips LOL

I'm here, just not much to contribute =]

 

[terry w]

I'm here, keeping up with the thread, just not doing much vape-wise. Went 3 weeks with no cigarettes in November to December and then hit a serious low and started smoking again. Fighting with those and back on MBV Cinnamon Red Hot. I've been slowly putting the XT-116 on my toppers so I can do dry burns right on the topper IF there's no plastic around. I'm still waiting on the rope, so once that comes in and I figure it out, I'll be using that as well.

Nothing else for me but getting used to a shift change, some new duties, and hanging on by my fingertips LOL

I'm here, just not much to contribute =]

Here is a good video to help with wire rope builds lisa...Build: Stainless Steel Rope with Ekowool Sleeve - YouTube

 

[RANGERmsr]

This is the start of our winter here. Sometimes we get a cold December, but not often. Most times our Winter is January and February, then Most times starting to rise in March. I am used to HOT. 70"s are cool, 60's I wear a light jacket, 50's are COLD, below that I wear long underwear. Living in Florida, you get used to the Tropical weather, Cold really hurts, but I'll live, just won't like it. Wonder how the cold will affect my vaping? I quit for a few years and now that I started back I can't remember if I had problem before, well I guess I will find out in a day or so.

Vape On

Yeah, Its cold here in NC too. We are down to 0 degrees F tonight. Going to be a 4 dog night (now wheres that other dog) lol. Stay warm Burnie

I'm here, keeping up with the thread, just not doing much vape-wise. Went 3 weeks with no cigarettes in November to December and then hit a serious low and started smoking again. Fighting with those and back on MBV Cinnamon Red Hot. I've been slowly putting the XT-116 on my toppers so I can do dry burns right on the topper IF there's no plastic around. I'm still waiting on the rope, so once that comes in and I figure it out, I'll be using that as well.

Nothing else for me but getting used to a shift change, some new duties, and hanging on by my fingertips LOL

I'm here, just not much to contribute =]

I'm hangin around too. Just been extra busy. I just rented my old shop out, and had to do some major cleaning up for the guy moving in. It's amazing the stuff that can pile up over a few years.

Hang in there Lisa! I wish you the best

I'm glad i found this thread. I'm learning some things here, and thanks for that. Maybe I'll get to contribute more as I learn. lol

 

[terry w]

Yeah, Its cold here in NC too. We are down to 0 degrees F tonight. Going to be a 4 dog night (now wheres that other dog) lol. Stay warm Burnie



I'm hangin around too. Just been extra busy. I just rented my old shop out, and had to do some major cleaning up for the guy moving in. It's amazing the stuff that can pile up over a few years.

Hang in there Lisa! I wish you the best

I'm glad i found this thread. I'm learning some things here, and thanks for that. Maybe I'll get to contribute more as I learn. lol

Pleased that you like it ranger, and that you are picking some tips up. You will also probably have noticed that there is a fair amount of bulls*** posted on here mainly from Trouble... Only kidding Ian

 

[RANGERmsr]

Pleased that you like it ranger, and that you are picking some tips up. You will also probably have noticed that there is a fair amount of bulls*** posted on here mainly from Trouble... Only kidding Ian

Hahaha...thats another reason I like this thread. I fit right in. LOL. No worries Guys n Gals, I always keep my hip boots around

 

[trouble1000]

Yay, more than 2 posts to read when I come back on-line. Who said my thread had lost it's mojo

Good to see that it's not just me and Terry chatting garbage like a couple of old fish-wives

Nothing much to update with today - my LT order for the DIY stuff has shipped today and that's it. Also the new Kayfun and the Russian 91% are still going strong, no leaks, vaping great.

I see that you're having some bloody awful weather across the pond. Saw some pictures in the paper today for the Detroit area, that's some serious snow and blizzards going on. I hope there's not too much damage caused, it looks pretty catastrophic from what I've seen. Anyway, I hope all my US vaping family stay safe. Stay in people and have a national vaping day/week/month.

 

[terry w]

Yay, more than 2 posts to read when I come back on-line. Who said my thread had lost it's mojo

Good to see that it's not just me and Terry chatting garbage like a couple of old fish-wives

Nothing much to update with today - my LT order for the DIY stuff has shipped today and that's it. Also the new Kayfun and the Russian 91% are still going strong, no leaks, vaping great.

I see that you're having some bloody awful weather across the pond. Saw some pictures in the paper today for the Detroit area, that's some serious snow and blizzards going on. I hope there's not too much damage caused, it looks pretty catastrophic from what I've seen. Anyway, I hope all my US vaping family stay safe. Stay in people and have a national vaping day/week/month.

Speaking of rba`s mate, this kraken isn`t performing very well ! It vapes ok-ish but no where near as good as my I atty, with pretty much the same build.

The airflow gives a very very airy draw, even with it closed off completely. I am thinking that i may have to try dual coils in this to see if it gets any better, problem is i only have high nic juices.

 

[KurrptSenate]

How hard is it to get FT to change shipping methods (Just ordered the product today)

 

[terry w]

How hard is it to get FT to change shipping methods (Just ordered the product today)

Should be straight forward really, just open a ticket with them and hope they read it before shipping your goods. They usually respond to there tickets between 12-24 hours.

 

[KurrptSenate]

Should be straight forward really, just open a ticket with them and hope they read it before shipping your goods. They usually respond to there tickets between 12-24 hours.

I opened a ticket so hopefully everything is good.

Mine is a bit trickier as they are sending me a replacement deck for my Taifun GT (stupid chromed POS). They were going to ship it with my Aqua clone, but I canceled that order after they put up a new Aqua clone recently

So I have to get them to change shipping, cancel an order, then add the SS deck to this order. lol

 

[terry w]

I opened a ticket so hopefully everything is good.

Mine is a bit trickier as they are sending me a replacement deck for my Taifun GT (stupid chromed POS). They were going to ship it with my Aqua clone, but I canceled that order after they put up a new Aqua clone recently

So I have to get them to change shipping, cancel an order, then add the SS deck to this order. lol

LOL I don`t think you will have any problems mate, they are pretty good at sorting stuff out imo

 

[trouble1000]

Speaking of rba`s mate, this kraken isn`t performing very well ! It vapes ok-ish but no where near as good as my I atty, with pretty much the same build.

The airflow gives a very very airy draw, even with it closed off completely. I am thinking that i may have to try dual coils in this to see if it gets any better, problem is i only have high nic juices.

Maybe try covering the airflow holes with some mesh or something like that - they are airflow holes on the Kraken aren't they mate ??
With the Kayfun types, some people are rolling up mesh and putting it in where the airflow screw goes to change the airflow.

If you go for dual coils just make the ohms a bit higher with more wraps on the coils, that way you won't blow your head off with high nic juice