Anyone here used fasttech.

[Codz]

I think i must have got lucky with vapology. From what i remember, they have always had stock whenever ive gone to order from them. I'm resisting ordering any juices for a while though and waiting to see how things go when i get my first zamplebox soon

 

[terry w]

I think i must have got lucky with vapology. From what i remember, they have always had stock whenever ive gone to order from them. I'm resisting ordering any juices for a while though and waiting to see how things go when i get my first zamplebox soon

Funny you say that cody, i have just been looking at their site and they are now stocked up Think i will put an order in later, do you have the discount code mate ?. And yeah let us know what your juices are like from zamplebox.

 

[Codz]

I'm not sure i've ever used a discount code for Vapology.... i think i looked a couple of times, but couldnt see one. If anyone knows it will be Ian

 

[terry w]

I'm not sure i've ever used a discount code for Vapology.... i think i looked a couple of times, but couldnt see one. If anyone knows it will be Ian

Just did a quick google and i think aaec works cody, i will try it now and get back to you.

EDIT: Yep it works for 10% off just got 30 ml of cappucinno with double extra flavour, from the tailor made.

 

[trouble1000]

Well you lot have been busy in my absence - but at least you've been behaving

Glad you got the Russian and Nemmy sorted Terry. I'd have said make sure you use the fill screw with it, because I've found that the vacuum on it is a lot more than the Kayfuns, so the upside down method can cause leaks. As long as it's working ok now that's the main thing. With the positive post screw, it's the same as a kayfun, but the one on the kayfun still makes contact if it's unscrewed a little.

I'm the same as you Cody, never had any problems with out of stock at vapology, but I do tend to order at night. So maybe he's been madly mixing during the day, so all my orders are in stock.

I've had to use mole grips myself on the fogger Bob. When it gets stuck, it gets stuck real tight.

Paul, you've raised a fair bit of money then. Sounds like a great cause mate - job well done there.

 

[terry w]

Well you lot have been busy in my absence - but at least you've been behaving

Glad you got the Russian and Nemmy sorted Terry. I'd have said make sure you use the fill screw with it, because I've found that the vacuum on it is a lot more than the Kayfuns, so the upside down method can cause leaks. As long as it's working ok now that's the main thing. With the positive post screw, it's the same as a kayfun, but the one on the Kayfun still makes contact if it's unscrewed a little.

I'm the same as you Cody, never had any problems with out of stock at vapology, but I do tend to order at night. So maybe he's been madly mixing during the day, so all my orders are in stock.

I've had to use mole grips myself on the fogger Bob. When it gets stuck, it gets stuck real tight.

Paul, you've raised a fair bit of money then. Sounds like a great cause mate - job well done there.

Yes you should have told me about the filling method ian, It pi88sed out everywhere when i used the upside down way LOL, so i am blaming you

 

[trouble1000]

So today's update :

No vapemail. But have been busy. Was too tired to post yesterday when I got in. Having a 12 hour day on my last day of 8 days straight was a killer.

-------------------------------

Thanks to Terry for the Kraken. Got it set up today with a single rope wick, gone through half a tank already. Cracking vape mate I'll try a dual in it at some point, but I'm impressed with it so far.

Had a play with the Poldiac mod too which had stopped firing. One of the magnets in the switch had become misaligned. So I've re-glued it, works great now with the Kraken in top.

Put the Aios together Gennie style with a single vertical cotton wick. Worked superb for 10 minutes. Very cool vape, but loads of flavour. Then put it down and all the juice blew out of the airholes. So I ripped it apart. This time did a mega cotton/dragon/cloud/micro coil. 2mm micro, horizontal this time. Very long cotton tail wick wrapped all the way around the deck, with extra cotton filler, leaving the centre hollow. 1.5mm rope fully covered with cotton extending up through the juice hole in the bottom of the tank. Filled up with Berry Blast, 30 minutes in, no leaks, superb flavour. Took a while to build, but it looks great in hybrid mode on the chi-you

 

[trouble1000]

Just did a quick google and i think aaec works cody, i will try it now and get back to you.

EDIT: Yep it works for 10% off just got 30 ml of cappucinno with double extra flavour, from the tailor made.

Wish I'd have know about the code when I ordered

I'm not sure i've ever used a discount code for Vapology.... i think i looked a couple of times, but couldnt see one. If anyone knows it will be Ian

I blame Terry mate for not telling us sooner about the code

Yes you should have told me about the filling method ian, It pi88sed out everywhere when i used the upside down way LOL, so i am blaming you

Well I guess we're even now

No code for me and lost juice for you

Right back in a bit. My shower has developed a small leak I need to sort out. Talk amongst yourselves for a bit

 

[terry w]

So today's update :

No vapemail. But have been busy. Was too tired to post yesterday when I got in. Having a 12 hour day on my last day of 8 days straight was a killer.

-------------------------------


Had a play with the Poldiac mod too which had stopped firing. One of the magnets in the switch had become misaligned. So I've re-glued it, works great now with the Kraken in top.

Put the Aios together Gennie style with a single vertical cotton wick. Worked superb for 10 minutes. Very cool vape, but loads of flavour. Then put it down and all the juice blew out of the airholes. So I ripped it apart. This time did a mega cotton/dragon/cloud/micro coil. 2mm micro, horizontal this time. Very long cotton tail wick wrapped all the way around the deck, with extra cotton filler, leaving the centre hollow. 1.5mm rope fully covered with cotton extending up through the juice hole in the bottom of the tank. Filled up with Berry Blast, 30 minutes in, no leaks, superb flavour. Took a while to build, but it looks great in hybrid mode on the chi-you

Thanks to Terry for the Kraken. Got it set up today with a single rope wick, gone through half a tank already. Cracking vape mate I'll try a dual in it at some point, but I'm impressed with it so far.You are welcome mate You will have to get that grub screw out mate, which i couldn`t do, to get a double wick in, but you probably know that anyway.

 

[trouble1000]

You are welcome mate You will have to get that grub screw out mate, which i couldn`t do, to get a double wick in, but you probably know that anyway.

I've got plenty of allen keys so it won't be a problem. I reckon it will be easier to set up a dual coil on it than the aga was. Tell you what though, it does match the Poldiac really well. I've just noticed, when I put the Poldy back together, I put the button in upside down Oh well, it's working great, so I'll just do some Australian Vaping

-------------------------------------------

I'm hoping I've fixed the shower now. Spotted a small damp patch on the ceiling above the front door yesterday (that's where the bath is situated). So took off the bath panel, turned on the shower and could see a few drips coming down the side of the bath.

So it was either an easy fix - reseal the side of the bath, or a difficult one - leaking behind one of the handles on the side of the bath - meaning the bath would have to come out so I could get at the handle. I've gone for the easy fix - a bit more sealant. Hoping that's cured it, cos I don't fancy having to pull the bath out. Fingers crossed for when I check it tomorrow.

 

[terry w]

I've got plenty of allen keys so it won't be a problem. I reckon it will be easier to set up a dual coil on it than the aga was. Tell you what though, it does match the Poldiac really well. I've just noticed, when I put the Poldy back together, I put the button in upside down Oh well, it's working great, so I'll just do some Australian Vaping

-------------------------------------------

I'm hoping I've fixed the shower now. Spotted a small damp patch on the ceiling above the front door yesterday (that's where the bath is situated). So took off the bath panel, turned on the shower and could see a few drips coming down the side of the bath.

So it was either an easy fix - reseal the side of the bath, or a difficult one - leaking behind one of the handles on the side of the bath - meaning the bath would have to come out so I could get at the handle. I've gone for the easy fix - a bit more sealant. Hoping that's cured it, cos I don't fancy having to pull the bath out. Fingers crossed for when I check it tomorrow.

It does sound a bit awkward that mate, can`t you get to the pipe fittings ?? If you can`t it is bad plumbing in Ian. All the fittings should be reachable when you remove the panel, What have you used to seal it mate ?

 

[trouble1000]

It does sound a bit awkward that mate, can`t you get to the pipe fittings ?? If you can`t it is bad plumbing in Ian. All the fittings should be reachable when you remove the panel, What have you used to seal it mate ?

Yep, it's not the pipes though Terry. You know how you can get baths with a handle on each side to help getting out of the bath, well ours is like that. The side closest to the outside wall is where the leak is. So it either has to be the seal between the bath and the tiles or water is getting behind the handle and dripping down the side. To get at the back of the handle to check the washers and bolts, I'd have to take the bath out. I can only just get my hand up the side of the bath and can barely reach the washers and bolts on the back of the handle.

I'm hoping I've fixed it by putting in a fresh sealing strip, I only sealed it a couple of months ago, but I did notice when you stand in the bath there's a small gap between the bath and the sealant, I musn't have done a wide enough bead of sealant. Anyway, fingers crossed, it's fixed now, I'll try it out tomorrow. I used the proper sealant and not some cheapo stuff.

 

[terry w]

Yep, it's not the pipes though Terry. You know how you can get baths with a handle on each side to help getting out of the bath, well ours is like that. The side closest to the outside wall is where the leak is. So it either has to be the seal between the bath and the tiles or water is getting behind the handle and dripping down the side. To get at the back of the handle to check the washers and bolts, I'd have to take the bath out. I can only just get my hand up the side of the bath and can barely reach the washers and bolts on the back of the handle.

I'm hoping I've fixed it by putting in a fresh sealing strip, I only sealed it a couple of months ago, but I did notice when you stand in the bath there's a small gap between the bath and the sealant, I musn't have done a wide enough bead of sealant. Anyway, fingers crossed, it's fixed now, I'll try it out tomorrow. I used the proper sealant and not some cheapo stuff.

Did you fill the bath before sealing it Ian ?

 

[Burnie]

Well going to have some new vape mail next week even though I am not ordering anything right now.
Powerband (an ECF member) had a random drawing/contest, I posted a few times, my first post came up with 3rd prize.
Kanger T3D (clear) and a YK5 RDA
Not sure what they are or what I will do with them as I am using all carto's and tanks at the moment, but it is ALWAYS nice to get vape mail.

Vape On
Burnie

 

[terry w]

Well going to have some new vape mail next week even though I am not ordering anything right now.
Powerband (an ECF member) had a random drawing/contest, I posted a few times, my first post came up with 3rd prize.
Kanger T3D (clear) and a YK5 RDA
Not sure what they are or what I will do with them as I am using all carto's and tanks at the moment, but it is ALWAYS nice to get vape mail.

Vape On
Burnie

It`s always nice when you win something burnie well done mate. having said that i am never that lucky.

 

[trouble1000]

Did you fill the bath before sealing it Ian ?

Certainly did mate. I also had to tighten up one of the legs that support the bath, because there was a tiny amount of movement in it. So that was probably causing the bath to sink a fraction when we get in it - probably what split the seal. You know me mate, I won't let things beat me, have to fix it if I can

Well going to have some new vape mail next week even though I am not ordering anything right now.
Powerband (an ECF member) had a random drawing/contest, I posted a few times, my first post came up with 3rd prize.
Kanger T3D (clear) and a YK5 RDA
Not sure what they are or what I will do with them as I am using all carto's and tanks at the moment, but it is ALWAYS nice to get vape mail.

Vape On
Burnie

Excellent news mate, well done. I saw the comp myself, but I think it was only for US entries.

Congrats though, it's always nice to win something. I've got the YK1 dripper, lovely small piece of kit

 

[terry w]

Certainly did mate. I also had to tighten up one of the legs that support the bath, because there was a tiny amount of movement in it. So that was probably causing the bath to sink a fraction when we get in it - probably what split the seal. You know me mate, I won't let things beat me, have to fix it if I can


Excellent news mate, well done. I saw the comp myself, but I think it was only for US entries.

Congrats though, it's always nice to win something. I've got the YK1 dripper, lovely small piece of kit

Sounds good ian, should be fine now. Back to vapology, what flavours have you tried from there, and do you have any favorites ?

 

[trouble1000]

Sounds good ian, should be fine now. Back to vapology, what flavours have you tried from there, and do you have any favorites ?

Cappuccino obviously, that's my favourite. The pear and blackberry honey drizzle is good too. Don't bother with the black forest gateaux though, didn't like that one. The banoffee is pretty good too. The other ones I've had are the tailor made ones, with mixes of banana, chocolate, caramel, strawberry and cookie - normally two or three of each mixed up - they were all quite nice too - the best was strawberry, chocolate and caramel heavy on the caramel.

 

[trouble1000]

Oh, by the way. My last FT order shipped yesterday

 

[trouble1000]

Right, I'm gonna retire for the night. see you tomorrow.