it's a 510 connection but screws over the battery (like an ego cone) rather than in the battery? does anyone know what these are called and where can I find them online?
anyone know what type of clearomizer this is and where I can find them?
- Thread starter Dying2Live
- Start date
- th_trl_thread_readers 0
- Status
close but they screw into the battery rather than over the battery (like mine) where a cone screws on. any ideas?
its the ego-w
cant say this is the best or worst place to get them but it was one of the first that came up in a google search for ego-w
eGo-W Clearomizer Assembly
cant say this is the best or worst place to get them but it was one of the first that came up in a google search for ego-w
eGo-W Clearomizer Assembly
THAT'S IT!!! AHHH I LOVE YOU I BEEN LOOKING AROUND FOR 2 HOURS. thank you so much hyperfluous for the help . greatly appreciated.
so I figured out they are called F1 clearomizers, but I can't seem to find them at any online vendors. any ideas?
bump. so far I only found VaporAlley.com but they are selling them only with the penstyle cap so they kinda expensive at like 7.95$ a piece (wayyyy to much) anyone know any vendors that carry these for a normal price?
I too was interested in these, but the few places I found them all wanted that kind of "atomiser" money for what is really just a clearo. In the end I didn't bother.
yea it's bull.... I can't find these anywhere they are actually amazing I have 2 at the moment
Then they are probably worth the atomizer money if they are that good 
Edit- although the ones you found come with the pen clip which is why they are more i found some here at $5 i'm not from the us so iv'e never used this site so i can't vouch for them eGo-W Clearomizer
Edit- although the ones you found come with the pen clip which is why they are more i found some here at $5 i'm not from the us so iv'e never used this site so i can't vouch for them eGo-W Clearomizer
Last edited:
Definately an eGo-W eliq cart. It's missing the outer sleeve and mouthpiece in that picture. I did a review of those not to long ago here: eGo-W e-Cigarette: Impressions
DIY time?
You can pop the threaded portion out of the Clear EMDCCs and pop in a tubeless XL CE2. The top seals from the CE2 fit nicely in the flat-tip mouthpieces. Doesn't have to be the Clear EMDCCs, but it makes fluid monitoring easier.
Oh, and I mean the threaded part can be popped out of the metal "skirt" of the EMDCC. The part that pops out looks similar to most standard 510 carto connectors.
BTW, this was just a "proof-of-concept" build, so I was using an old CE2... I don't know if the newer ones are significantly different or what. And I didn't use it very long since it was already well-used to begin with :/
Pic of finished piece and of connectors to illustrate similarity. The connector on the right is what pops out of the EMDCC, left is from a CE2.
You can pop the threaded portion out of the Clear EMDCCs and pop in a tubeless XL CE2. The top seals from the CE2 fit nicely in the flat-tip mouthpieces. Doesn't have to be the Clear EMDCCs, but it makes fluid monitoring easier.
Oh, and I mean the threaded part can be popped out of the metal "skirt" of the EMDCC. The part that pops out looks similar to most standard 510 carto connectors.
BTW, this was just a "proof-of-concept" build, so I was using an old CE2... I don't know if the newer ones are significantly different or what. And I didn't use it very long since it was already well-used to begin with :/
Pic of finished piece and of connectors to illustrate similarity. The connector on the right is what pops out of the EMDCC, left is from a CE2.
Attachments
Last edited:
That is totally wicked man!
Ive been playing around with my ego cartidge trying to figure out how u made it.
popped out the whole skirt of the thing and just could not figure it out!
Ive been playing around with my ego cartidge trying to figure out how u made it.
popped out the whole skirt of the thing and just could not figure it out!
DIY time?
You can pop the threaded portion out of the Clear EMDCCs and pop in a tubeless XL CE2. The top seals from the CE2 fit nicely in the flat-tip mouthpieces. Doesn't have to be the Clear EMDCCs, but it makes fluid monitoring easier.
Oh, and I mean the threaded part can be popped out of the metal "skirt" of the EMDCC. The part that pops out looks similar to most standard 510 carto connectors.
BTW, this was just a "proof-of-concept" build, so I was using an old CE2... I don't know if the newer ones are significantly different or what. And I didn't use it very long since it was already well-used to begin with :/
Pic of finished piece and of connectors to illustrate similarity. The connector on the right is what pops out of the EMDCC, left is from a CE2.
I know! I would love to do this, but confused about a few things haha
DIY time?
You can pop the threaded portion out of the Clear EMDCCs and pop in a tubeless XL CE2. The top seals from the CE2 fit nicely in the flat-tip mouthpieces. Doesn't have to be the Clear EMDCCs, but it makes fluid monitoring easier.
Oh, and I mean the threaded part can be popped out of the metal "skirt" of the EMDCC. The part that pops out looks similar to most standard 510 carto connectors.
BTW, this was just a "proof-of-concept" build, so I was using an old CE2... I don't know if the newer ones are significantly different or what. And I didn't use it very long since it was already well-used to begin with :/
Pic of finished piece and of connectors to illustrate similarity. The connector on the right is what pops out of the EMDCC, left is from a CE2.
any chance on a Video Tutorial Marb?
Ah, I realize that I was a bit vague - sorry, guys and gals, but I didn't really want to derail OP's thread too much. I'm not good with video, but I'll take some pics and whatnot and do a mini-tutorial thread in the appropriate area
EDIT: one thing I'll mention here - the center pops out from the metal skirt if you set it base-down on a block of wood and drive it out from the top.
EDIT: one thing I'll mention here - the center pops out from the metal skirt if you set it base-down on a block of wood and drive it out from the top.
Last edited:
I managed to pop the filament out of the skirt (very easy, just banged it out from the top with a screw driver and mallet)
then tried to put in my e2 wick system but couldn't secure it in the skirt. I used the e2 from one of gotvapes fluxomizers.
Thinking about soldering it to the skirt.. duno.
then tried to put in my e2 wick system but couldn't secure it in the skirt. I used the e2 from one of gotvapes fluxomizers.
Thinking about soldering it to the skirt.. duno.
- Status
Similar threads
- Locked
- Locked
