Anyone know what's going on here?

[Twistedmadness95]

So first of all, the mod I'm using is a tank crossing v2 and little boy rda, both authentic. A quick Google Image search will show the Inner workings of the mod so that my post makes more sense.
The firing pin is sparking when it makes contact with the outer body of the 510 causing the top of my mod and little boy to heat up very, very quickly. The build is just a simple dual coil, 24G 6wrap at 0.2ohm with lots of clearance between the coil and the posts, coil and the deck and coil and the inner side of the top cap so there is no chance of it shorting. The battery's I'm using are efest 2500mAh 18650 35A continuous drains that were brand new when they were put in and have been used since I got the mod and have been charged together and only ever used with this mod. Anyone got any ideas why this is happening? Cheers.

 

[spoolinlude]

one idea would be you could adjust your pins so the button doesnt have to move as far and there for maybe keeping it from touching the sides

 

[TimmyMill]

Yeah, I think I read somewhere that the 510 connection on those are a bit "dodgy." Try adjusting the pins as spooninlude said.

 

[Twistedmadness95]

Thanks for the feedback, I'll give that a go and see what happens. If any of you have instagram them go to my profile @vapenation95. I've got a photo and video there showing exactly what's happening. Thanks