anyone tried a e pipe mech mod?

[element9633]

I have seen all these clones of e pipe mech mods on fasttech and they look super small. I know they only hold one 18350. I feel like buying one since they are so cheap and throwing my rda on one just to have something SOOO small. just wondering if anyone had tried them

 

[suspectK]

My hammer can use 350, 490, and 650 flat tops. The adapter extension goes into is stuck on switch.. haven't been able to get it off..I prefer it in 350 mode.

Edit - tobeco version.. got it before available on fasttech.

37, ph0n3 h0m3.

 

[element9633]

the hammer can use a 650? how does that thing fit in there lol

 

[WhazatU]

I have the Hcigar version of the Hammer. It comes with two extension tubes one for the 18490/18500 and one for the 18650 batteries. You unscrew the switch and screw in the desired extension and then back on with the switch. Kinda ruins the look if you ask me so I just use the 18350's. Easier to use also. In this picture I have replaced the original switch with one for a brass King Mod just to see if it worked. Like the locking ring on that one better.



I also have the Smoketech ePipe. It works ok, but I didn't like the way the switch worked and I really liked the idea of setting the Hammer down and not thinking it was going to fall over with the slightest jiggle of the table.

 

[Funk Dracula]

the hammer can use a 650? how does that thing fit in there lol

With extension tubes under the button. In 18650 mode it holds and looks silly, but doable. It ends up looking like a right angle. lol

You can flip the caps so the extension tubes and battery are under the atty to maintain the pipe look, but it requires a spacer under the switch to make contact with the tube and fire. Also, the tubes don't quite screw down flush at the base assembled this way, but it's not terribly noticeable considering the way it interfaces with the base.

I recently won one of these, and absolutely love it.

Apparently it can be a bit of a gamble with some significantly horrible voltage drop on the 510 cap. I received an Hcigar model, and I haven't noticed any voltage drop at all, which is good enough for me. Others have experienced voltage drop so bad it's completely unusable. (Tobeco model?) ( > 1Ω drop)

There are fixes for that, and worth it IMO if you get a bad one.

It's a great little thing to hold and vape and is one heavy solid chunk of steel. (can double as a blunt force weapon)

 

[WhazatU]

BTW, check out the "Model Specific Discussion" forum. There is a subforum "E-Pipe Models". Haven't looked in there myself, but gotta have something of interest....

Model Specific Discussion(59 Viewing)
Discuss model specific issues in the appropriate subforum
Sub-Forums: eGo Type Models, E-Cigar models, E-Pipe Models, Joye 510, M-401/402 "Mini" & M403 Super Mini, KR808D-1, Joyetech eRoll *Mini*, DSE 901/b *Mini*, RN 4075 *Mini", M-201 *Penstyle*, DSE 801 *Penstyle*, RN-4072 *Penstyle*, RN 4081 *Super Mini*, Joye 306, Blu Electronic Cigarettes, Disposable E-cigarettes, Vuse Digital Vapor System​

 

[KODIAK (TM)]

I have one of these:



It's really rather nice - especially folded in stealth mode. Looks like a weed pipe from the 70's though and at my age it causes quite a stir at times.

 

[Jarbs]

I've told myself I don't need any more mods once my nemesis comes, but I ABSOLUTELY need a wizard pipe.

 

[element9633]

I have one of these:

View attachment 315501

It's really rather nice - especially folded in stealth mode. Looks like a weed pipe from the 70's though and at my age it causes quite a stir at times.

I would like one that looks like that, but I literally don't have any tanks anymore. ive given them all away to people since all I use anymore are rda's

 

[Ken_A]

You will probably get a better response from the epipe forum

E-Pipe Models