APV Questions

[jdanderson1449]

So, I'm contemplating stepping up my game a little bit and picking up an APV. My question is which direction do I go. I've looked at Provaris and while I really dig them, and the fact that they are American made, I don't really think they fit my needs.

I have also been totally digging on the Vamo line. I think something a little newer design than the V2. At least a V3. I like the idea of being able to remove the beauty ring to accommodate different tank sizing. I also really like the screen output on the Vamo. I like knowing my output voltage/ wattage and all that. It would also be really nice to be able to check overall resistance on my DIY coils since after hooking up my multimeter, they all checked out higher resistance than what was etched in them.
The last really appealing part of the Vamo is that they can be had for around 40-45 bucks as long as I'm willing to wait til forever for them to ship.

So, what do you all think? I'm open to suggestion but I really don't want to run out and spend $100-$150 on my first APV.

 

[Baditude]

Have you considered the MVP?

The built-in battery lasts 2 - 3 days per charge. Pass through ability. No extra batteries or charger to purchase.

Accepts both eGo and 510 threaded juice devices. About the size of a slim pack of cigs, so it is pocket-friendly. Very solid build.

Does NOT use the same 33.3 Hz PWM chip that makes the "rattlesnake" sound that most other Chinese mods use; it makes the same straight line on an oscelloscope that a Provari makes, resulting in an arguably smoother vape experience.

 

[StarsAndBars]

Man, what a question. Do you plan on getting into RDA? or just sticking with tanks, cartos, etc? Honestly, everyone raves about the Provari, but 200 bucks? Sheesh! If you're the kind of guy that likes to trade devices more often than every year... yeah, I say Vamo all the way. I know I recommend this to everyone but here it comes. Check out the Itaste Mvp as well. Balls to the wall battery life and very reliable.

If you plan on getting into RDA's and want to go sub-ohm, go with a tube mech, and decent battery. You can get a decent setup for under $100 and be ready to rock and roll.

I've been vaping for a few years, and have settled on the MVP. It offers every practical superiority I demand. Good luck with your search man.


Here's a pic of mine with an Igo-L and wrap on it. Satisfies all my blazing needs.

 

[jdanderson1449]

I haven't put much thought into the MVP. It mostly just doesn't really appeal to me. I think it's the box thing.

It's not entirely out of the question just hasn't been an option.

As far as RBAs, I haven't put much thought to those yet either. For the time being, I'll probably stick with the top feeding clearomizers just because I'm familiar with them and once I get comfortable with rebuilding the coils in them, I'll move on to the next best thing.


Sent from my iPhone using Tapatalk

 

[StarsAndBars]

I never thought I'd want a box mod but after I got one it took about an hour to get used to. IMO a decent box mod is a little more pocket friendly than the Vamo. Have you seen one in person? It's pretty tall. Neither would be a bad choice, but for the battery life and practical use, a box mod is def worth considering. After having one I don't think I'll ever go back to a tube mod as my go to. Hope this helps

 

[jdanderson1449]

It would be nice to put one of them in my hand. I'll have to stop by the vape shop and see what they have.

The biggest thing I see them pushing is the Titan mod. Again, a little out of my price range to see just how in to APVs I want to get. They don't handle much of anything except the really cheap stuff besides that.

Lots of vivi nova, ce5 and cheap eGo type pen style batteries. I asked them about some cig-a-like batteries for carrying in my shirt pocket and they looked at me like I was from another planet. Like "why would I want something so small and underpowered?"


Sent from my iPhone using Tapatalk

 

[StarsAndBars]

I've got a couple of Janty Dura C XL penstyle batteries that actually still work. With a Low Resistance Atty they are a pretty decent vape. They are very small and portable but truth be told I can't imagine a situation where I will ever use them again. As convenient
as they are, I would still rather carry a clunky boxy mod based purely on the better performance. Once I found something that gave a totally satisfying reliable vape, the convenience of a smaller device paled in comparison to the experience of a device that offered more power than I need.

Of course not everyone wants to vape at higher voltage, but personally I can't imagine going back to a 3.7 volt device unless I were doing sub ohm (which I see no need for at this time).

 

[jdanderson1449]

I've watched what seems like a million reviews on everything from provari to lavatubes to MVPs and I'm still leaning heavily toward the vamo v5. I'm sure I can live with all the idiosyncrasies that pbasardo takes issue with. Especially considering the price and ease of use and variety of features. I'm still new to vv/vw devices but I think it will make a good on the go mod with my twist as a backup.


Sent from my iPhone using Tapatalk

 

[epcii]

When I took that step, I got the Vamo V5 from tropicalvapors.com and I don't regret it. It's an awesome APV. I used it in flat eFest 18350 mode since it was large enough as it is. One thing to keep in mind about it is that your coil must be 1.2 ohms minimum, which is fine anyway since it's not really good to go straight into sub-ohm vaping without first learning about coils and battery safety, etc.

 

[jdanderson1449]

Not worried about sub-ohm just yet anyway since all my builds are around 1.6. I need to get some heavier wire before my next builds but I'm pretty set on the V5. I like the features, I like the price and my buddy's V3. Just don't like that the top ring doesn't come off to accommodate large diameter ego clearos. The V5 is a winner in my book.

I'll probably spring for something a little better down the line but I think the Vamo will do just fine to get my feet wet in the mod world.


Sent from my iPhone using Tapatalk

 

[epcii]

On the V5 there is a top ring that does come off, the one with the divots. It acts as a catch cup for any leakage from the atty. I'm not sure if that's the one you're referring to.

 

[dam718]

If I was gonna get a Vamo today, I would get the V5 just for the versatility in what you can put on top... It will accommodate nearly anything you want to put on it...

Keep in mind, though... A Vamo is a LONG mod, especially in 18650 configuration. Possibly the longest 18650 mod out there... In 18350 configuration, it is roughly the same size as a ProVari standard with an 18490 battery. Think: Skinny Lightsaber Handle... LoL

Don't get it for the pocketability factor if you plan to run 18650's... Other than being long, it's a decent mod for the money...

Oh yeah, don't waste your money on the coated versions, the chrome / gunmetal coating WILL wear and chip off rather quickly. Spend a little extra and get the stainless steel... You won't regret it!

 

[epcii]

+1 for stainless steel. It's what I have and it's solid.

 

[jdanderson1449]

That ring with the countersinks around it is exactly what I was referring to.

Also, ditto on stainless. If they made one in brushed aluminum I'd totally send it off to be anodized.

I'm not really concerned about size. I have an ego twist for portability purposes. I'm after it strictly for price and features.

Side note, after having a simple vv device like the twist, I don't think I'll ever be vaping a fixed voltage battery again.


Sent from my iPhone using Tapatalk