Are there M401/Pilot USB passthrough vendors in US?

Status
Not open for further replies.

lhntx

Full Member
Apr 7, 2009
31
9
Houston, TX
Does anyone know where to find an m401/Pilot USB passthrough (assuming there is such a thing) being sold in the US? I found a site trueman-ecig.com that has them, but I am very reluctant to buy from a site in China because I have not been able to find out if they are reliable or legit.

ps.... how does one add the code to display the stats showing the stats since an analog cig was last used? :confused: I ran across the code the first time that I signed up for the forum, but then the forum wouldn't allow me to use it (not enough posts, which doesn't seem fair), and now I can't find it anymore at all.
 

C3-H8-O2

New Member
Mar 22, 2009
4
0
Florida USA
I have been watching the trueman-ecig.com site for the last two weeks. It looks like they are just starting up thier business. They had issues with paypal not working at first and issues with there web site in general. Consider me a "guinea-pig" as I just placed an order with them this week. Worst case, I am out a hundred-bucks, but I do have a certain amount of faith in small business people in general.

I did have very pleasent communications (e-mail) with thier sales support. They ship by EMS so I wouild expect to see my order in a week or two at the most. I will keep you posted if it arrives.

I purchased spare parts hardware only. Even though virtually all liquid comes from China, I prefer to by it from a USA based supplier. This may sound sick, but if there was a serious problem (accute) with any liquid from a USA supplier, I believe word would get out quickly, even on this forum. This should minimize my chance of getting really bad juice. We are all guinea-pigs to some extent, but I will take greater risk with hardware and my own dollars than with liquids.
 

Fedor

Ultra Member
Supporting Member
ECF Veteran
Oct 23, 2008
1,524
1
My observation on trueman-ecig:

1) Very secretive. Unlike Bestecig, does not show their Bank/ Western Union info. Requires customers to contact them.

2) Only accept Paypal cash. Does not accept credit cards via Paypal. Not a good thing for customers as credit cards gives much better buyer protection and the fact that they specifically refuse this raises concern.

3) Very high shipping. $25 for 1 starter kit. $35 for 2 kits. Totally cancels off the low prices.

4) Sells parts and cartridges for pretty much all models, except for the M401.
 

vaporize me

Super Member
ECF Veteran
Apr 3, 2009
407
0
West Chester, PA USA
Got an answer from trueman-ecig this morning. This is how they addressed my questions about having M401 attys:

Thank you for your email.
For your questions,
1.Do you have them available?
yes.we do.
2.Are all your atomizers guaranteed for 1 year?
yes,they are.
3.How would a get a replacement for a bad atomizer?
Generally we need you offer some proof about defective parts,like pictures,video.
then our replacement could be sent with you next order together.
If no another order,we need you send these defective parts firstly at your expense,
then we send replacements at our expense.
4.Do you need for me to send you the bad one first?
please see Answer 3.

Hope to cooperate with you.

Best Regards
Dawa
----------------------------------------------------------------------
TRUEMAN TECHNOLOGY (ZhengZhou) LTD
Tel: 86-371-60955223 Fax: 86-371-60955223
Email: info@trueman-ecig.com
MSN: trueman-ecig@hotmail.com
TRUEMAN ECIG-BEST PRICE USB Passthrough RN4081 M401 DSE084 DSE901 DSE801 DSE101 DSE103 - Powered by ECShop
Add: 9 wenlao Road, Zhengzhou, Henan, China 45000

Sounds great but would love to hear from somebody that actually ordered from them. The high shipping information posted by fedor does negate some savings though. Never having done it before, I am still paranoid about ordering from China.
 

Fedor

Ultra Member
Supporting Member
ECF Veteran
Oct 23, 2008
1,524
1
Generally we need you offer some proof about defective parts,like pictures,video.
then our replacement could be sent with you next order together.
If no another order,we need you send these defective parts firstly at your expense,
then we send replacements at our expense.

I am still paranoid about ordering from China.

I'm sticking to absolutelyecigs.com. I never needed to send any pictures or video. Just my word and i'll get replacements in my next order. Of course, trust needs to be established first.

Don't be paranoid. All of them comes from China. Even the local supplier you buy from gets it from China. With the impending ban, you better get used to Chinese retail.
 

prr2freya

Super Member
ECF Veteran
I just tried to place an order with trueman-ecig for 4 of the usb passthroughs so I have 2 each for me and a friend I am gathering up the perfect care package for... but they are having problems with PayPal (still or again). At $9 a pop it is worth the $25 shipping! That is what 1 passthrough costs from said US supplier,and they are currently out of stock anyway. I also googled for the passthough . If said US supplier had them in stock, I would have bought one and never tried to find another source. They look like exactly the same item. I wish trueman-ecig would get their PayPal in working order.

I have been watching the trueman-ecig.com site for the last two weeks. It looks like they are just starting up thier business. They had issues with paypal not working at first and issues with there web site in general. Consider me a "guinea-pig" as I just placed an order with them this week. Worst case, I am out a hundred-bucks, but I do have a certain amount of faith in small business people in general.

I did have very pleasent communications (e-mail) with thier sales support. They ship by EMS so I wouild expect to see my order in a week or two at the most. I will keep you posted if it arrives.
 
Last edited:

prr2freya

Super Member
ECF Veteran
My observation on trueman-ecig:


2) Only accept Paypal cash. Does not accept credit cards via Paypal. Not a good thing for customers as credit cards gives much better buyer protection and the fact that they specifically refuse this raises concern.
They have the option for paypal credit card as well now with a 3% processing fee. That is... If/when they get Paypal working again. At the moment... neither Paypal option is working...
 
Last edited:

harmony gardens

Super Member
ECF Veteran
Apr 9, 2009
903
2,800
Wisconsin
How's the healing going, prr????

I thought of another one for ya,,, vapin makes me prr :p

I just picked up a passthrough for a 901, and it's made my vaping expirience much more zen like at the computer. I want one for my 401, too. Maybe when one of my batteries goes, I'll make one like they're doing in the mod section. Would be fun to get out the old soldering gun,,,


I built a synthesizer kit once,,, I should be able to tackle a mod.

I was disappointed that the wallplug usb that runs my usb charger chord for the 401, doesn't have the oomph to run my passthrough. I want to get a double usb carplug and a dual hub wall unit, and I should be able to minimize the time i need to use my batteries.

I'm seeing that powering your ecig is a major consideration!!
 
Last edited:

prr2freya

Super Member
ECF Veteran
Still healing and prr'en for my m401! Have still not touched another analog (so far)... but i won't weep myself to sleep at night if i stumble a bit.

That is a disappointment. I thought of that as well.. I have been eying the wall plug for the m401 and wondering if it would work for that. I guess now I know it won't:( I have a regular electric plug in my car that works when the motor is running.. I have recharged batteries in the car with it... i was hoping I could use a passthrough with it (while a passenger) as well.

I was disappointed that the wallplug usb that runs my usb charger chord for the 401, doesn't have the oomph to run my passthrough.
 

cyberwolf

Reviewer / Blogger
ECF Veteran
Verified Member
Apr 22, 2009
2,217
403
Coral Springs, FL
Has anyone bought the 901 passthrough battery from bestecig? I got one with my last order but it doesn't seem to work with any of my USB adapters, although some are rated at 1000mA. The only way it worked was plugged directly into a computer and then did not work very well at all. I'm wondering if it's defective or I just haven't found the right combination yet.
 

prr2freya

Super Member
ECF Veteran
trueman-ecig seem to have worked out all the kinks and had been keeping me updated through email. I successfully purchased 4 of the 401 passthroughs at $9 each yesterday using Paypal credit card option. So that was 4 for $36. There was a processing fee of 3.1% I think it was for the paypal credit card option and the ems shipping fee they charged was pretty high.. Total for order came to $63.48.. Ouch! But if you compare to the US supplier selling each passthough at $25... I would have paid $100 plus shipping (and they have been out of stock for at least a 2 weeks anyway. I kept checking. I'm assuming they are held up/seized through customs as many large orders have been) I wanted 4... 2 for me and 2 for another friend so we would have backups in case they die.

M401 usb passthrough_USB Passthrough_E-Cig accessories_TRUEMAN ECIG USB Passthrough RN4081 M401 DSE084 DSE901 DSE801 DSE101 DSE103 DSE084 KR808 - Powered by ECShop

last night I got an email from them telling me they shipped them out. They also left me a link to contact them if they do not get here within 10 business days. They do seem to have had a shoddy start, but are working out the kinks and they are good at getting back to you. Too bad there was nothing else on their site I want or will want in the future.

But I will finally have the passthroughs and did not have to go through Centraltrade to get them. Talk about hassle! Central trade only allows bank to bank transfer or Western Union and they charge a fee if you do not buy in bulk. Good for a supplier, but not for a consumer. I really feel bad for the suppliers right now... all that money invested and possibly losing so much if their orders are not released.

I will update one more time once they arrive. (or fail to) I don't mind being a guinea pig if it helps others get this item. As of now they still have 90 passthroughs in stock if anyone else wants to give it a go....


Edit: I also wrote RuyanDirect about possibly selling usb passthroughs for the m401/2 and got this response:
---------
Hi,

So far the factory haven't produced the USB passthroughs for M series products yet. We will talk to the Smoore factory the end of this month to see if there is any possibility they can make such products for us. Or else we can only have other factories make such products for us.

Thanks.

Yours sincerely,

Heaven Gifts

---------------


Makes sense since the passthrough was made for a DSE401 and though compatable are not manufactured by the same people. I do love the thought of Smoore making one themselves and hope something comes of it
 
Last edited:

vaporize me

Super Member
ECF Veteran
Apr 3, 2009
407
0
West Chester, PA USA
cyberwolf, I'm not exactly sure and maybe somebody can give you assistance if this is incorrect. To my understanding a battery passthrough might need to be charged first before it is fully functional. Try leaving it on a powered usb hub for a while and see if that clears thing up. Then again, maybe I'm wrong. Good luck.
 
Status
Not open for further replies.

Users who are viewing this thread