Aris Pro build

[dcfluegel]

got one of the Council of Vapor Aris Pro RDAs in and was struggling to find a good build for it - not a lot of info out there... what info I was able to find indicated that:

- probably not a great rda for sub ohm build...
- based on positioning of the airflow column in the center, airflow dynamics were tricky...
- more of a flavor chaser than a cloud chaser

so, after a bit of putzing around, I did finally come up with what seems to be (thus far) a reasonably well working build for it - using 28ga kanthal dual vertical coils and horseshoe wick (wick goes over top of airflow column, down through coils into juice well - using cotton bacon on this build)

currently running at 20w on Tesla 120 wooden box mod - decent vapor production, great flavor... will never make cloud porn, but I got it primarily for flavor chasing (my el cabron gives plenty good cloud porn...)

thought I would share since there seems to be a paucity of info on this rascal...

 

[Kevin MacDonald]

Hey dcfluegel, seriously considering buying one of these for flavour not cloud.
Would you recommend it?
Cheers, Kev.

 

[dcfluegel]

it's definitely not a cloud buster, but pretty darn good flavor with the build i have on it

 

[dcfluegel]

keep in mind, though, if you use a vertical build like i have pictured, will need to wrap a 'left-handed' and a 'right-handed' coil

 

[dcfluegel]

and it IS a very cool looking rda to vape on, lol

 

[triastros]

I want to call myself a ''cloud chaser'' too and i am thinking of buying this rda.
What is your opinions with Ni200 build with this rda ?

 

[dcfluegel]

I want to call myself a ''cloud chaser'' too and i am thinking of buying this rda.
What is your opinions with Ni200 build with this rda ?

not a cloud chaser rda by any stretch of the imagination - nickel build would probably work fine, cool vape, good flavor - but you may have to play with configuration, since the airflow is a little different on it

 

[Tom Forde]

I like the verts with the wick over top the airflow. How are the posts set up? Are they like in a T shape? The 2 negatives on the top corners of the T and the positive at the bottom with the airflow in the middle?

 

[dcfluegel]

I like the verts with the wick over top the airflow. How are the posts set up? Are they like in a T shape? The 2 negatives on the top corners of the T and the positive at the bottom with the airflow in the middle?

yes sir!

 

[Tom Forde]

Strange deck configuration. I wonder how the vape would be if you ran a dual coil in a V configuration over the T shape. Or if you horizontally stacked dual coils on top of each other right above the center airflow.

 

[dcfluegel]

Strange deck configuration. I wonder how the vape would be if you ran a dual coil in a V configuration over the T shape. Or if you horizontally stacked dual coils on top of each other right above the center airflow.

may have some challenges with height available under cap - given that I seemed to get better performance with +ohm build, that would require a decent bit of wire also... if you try it, would be very interested in your results

 

[Tom Forde]

may have some challenges with height available under cap - given that I seemed to get better performance with +ohm build, that would require a decent bit of wire also... if you try it, would be very interested in your results

I don't have an Aris. I've seen it and it looked interesting but overall confusing to me lol. I'm more interested in the Pugio by Hyon, the Kennedy 24mm, or an Aeolus v2. I can't decide which to get I've been internally debating for weeks now