Artery Nugget GT Pod Mod Kit 200W

[Frenkyou]

The Artery Nugget GT Kit is the world's first double 18650 mod pod kit. It can deliver a maximum power of up to 200 W. It has a 0.96 "color screen. It is compatible with the XP coil core series. The AERO chip is designed to provide constant output power. It has an intelligent power setting. to help prevent premature burns of the coils. Also available separately, it has a wide range of accessories such as the 510 adapter, the rba base and the 8ml tank.

I thank the Sourcemore shop for offering me the opportunity to do this review.
Enjoy the reading.

The Artery Nugget GT packaging shows on the front: a beautiful sporty decoration of the "Nugget GT" logo, the image of the Mod and a series of main product features.

The contents, the manufacturer's address and the inevitable logos and brands are listed on the back.

On the side we find the artery email address, a bar code, an indication of the color and capacity of the tank, (Gun metal 8ml).
Social logos where artery is present, scratch and check and security code are displayed on the other side.

The Nugget GT Mod Pod Kit package includes:

1- Nugget GT Mod
1- Nugget GT Pod (8 ml)
2- O-ring
1- Silicone cap refill
1- Coil 0.15Ω XP Core 60-80W (pre-installed)
1- Coil 0.40Ω XP Core 20-35W (included)
1- Replacement Drip Tip 510
1- Type C charging cable
1- Warranty card
1- User manual
1- Battery safety data sheet

Parameters of the Artery Nugget GT pod kit:

Measures: 40x31 x 102mm
Weight: 140gr
Material: Zinc alloy + PCTG
Power range: 5-200W
Voltage range: 0.5-8V
Resistance range supported 0.1-2.0Ω
Pod capacity: 8ml
Charging current: 2A

Available colours:

Black, red, blue, gun metal

Accessories line:

The list of accessories (on Sourcemore) includes the 8ml pod, a 510 adapter for any atomizer and an RBA for DIY. All this makes this Mod even more intriguing.

How the Artery Nugget 200W is made:

The frame of this mod, apart from small details, is made entirely of zinc alloy.
The lateral profile has a cylindrical shape well connected with the flattened parts in front and back.
On the upper part of the Mod on both sides, there are: the air-flow in the form of six very thin and flat slits near the front panel give the change to two other wider and shorter slits.
In the center there is an ergonomic recess useful for the fingers, slightly higher and towards the front panel there is a decorative insert of black color arranged vertically, this insert helps to improve the aesthetic appearance of the mod. The recess for one of our nails (the one you prefer) is obtained only on one side and is used to access the battery compartment.

The front part contains the "almost" completely round fire button, arranged above a black frame which also includes the Oled screen, the rocker arm of the up / down keys and the type-C charging socket.

The rear part is wider, flat but curved on the edges, it is essentially the battery compartment door. At the bottom we find the writing "Nugget GT Artery", at the top of the pod we can see the quick release button, like a clip belonging to the pod itself.

 

[Frenkyou]

The pod housing has a raised plastic top screwed to the mod, the shaped hole houses the bottom of the coil, which will make contact on the gold-plated pins that you see on the bottom. Also you can see the air-flow grids and the recess left free by the clip button of the pod, this recess has a lip positioned inside to adapt to the clip of the pod. With this system there is no need for magnets, the two parts engage with precision, the pod is easily extracted with a pressure on the small button.

The bottom of the Nugget has six vent holes for the cells, the C E mark, the disposal logo and the word "Designed by Artery"

The battery compartment is made of fireproof material and is screwed to the frame by means of four screws. At the top and bottom of the respective recesses there are magnets, not visible being painted black.
The compartment also has a convenient strap for extracting the cells and four indications regarding the correct direction of insertion of the batteries. The two upper pins are spring loaded to facilitate operations.
As you can see, the internal part of the removable panel has two magnets placed centrally at the ends.

The right part of the image below shows the Nugget with 18650 cells inserted.

Pod:
The cartridge can hold up to 8 ml of e-liquid. Its shape follows that of the Mod; cylindrical on the sides and flattened on the sides.
The Drip tip has a fantastic shape for the lips, in addition it is swivel to always find maximum comfort with any handle, I like to keep it as in the photo, who does not like this mouthpiece, can always resort to the traditional replacement that Artery included in the kit.

The refill occurs from the bottom through a hole of generous dimensions, the silicone tongue has a good grip.

In the image on the left we can see the differences between the two mouthpieces and partially see the inside of the two coils included in the package. These coils are push-in and pull-out.

The OLED screen is bright and clear in any ambient or external light. It has all the useful information for vape in VW mode.

The cold light LED with 5 different selectable colors is activated when the fire button is pressed to vape, some may not like this scenographic effect, therefore Artery intelligently made it deactivable.

Let's now see some of the main settings of this Nugget GT sent to me by the Sourcemore online shop:

Power on / off: five clicks on the fire button.

To lock / unlock the settings (not the delivery), press the Up / Down buttons together.

By simultaneously clicking the Fire / Down buttons we can deactivate or change the color of the LEDs with side cold lights, the sequence is as follows: blue / green / purple / red / white / LED off.

To change the color of the screen (5 colors) just press Fire / Up the sequence is as follows: blue / green / purple / red / white.

To deactivate the limitation on the wattage, just click 3 times on the fire button (with the mod unlocked) and choose between power limit / lock or power limit / unlock, I recommend leaving it in lock as the system sets the optimal power and protects the coil from any distractions.

The image below collects all the information that may arise during the use of the mod.

Below you specify which are the active safety protections. The graph instead shows the delivery curve of the Nugget GT compared to the average curve of some competitors.

Final thoughts:

The device in question is tall, slender, rounded, elegant and ergonomic, but how? It should be a Pod, in fact it comes with a huge cartridge and also its dimensions if we compare it to any Pod are huge, as far as I'm concerned I think this is more a full-blown Mod, for this I would have liked the adapter 510, because I really like the object and it is undoubtedly the most beautiful and ergonomic pod I have ever seen or held in my hand, even if it is bigger than you would expect from a classic pod.

This mod offers no other vaping modes other than power, but its accessories make it extremely versatile, unfortunately, these accessories are not included in the kit. But we could always buy them from Sourcemore.

The user interface is intuitive and easy to navigate, the intelligent detection function (power limit) is really useful, because the buttons are sensitive, if unfortunately you forgot to lock the screen it would not be so difficult to find the 200w mod, how much would the coil last at this wattage? 1-2 seconds? But above all the dry shot in the throat at 200w would be devastating.

The air flow is not adjustable without the RBA base or the adapter for a tank with 510 connection. However, I find the air flow absolutely adequate for the Coil 0.15Ω XP Core 60-80W (pre-installed), this coil with the power limit is automatically adjusted by the 65W chipset, I find that this wattage is perfect both in aroma and in the density of the vapor.

I expected less aroma and less steam from the Coil 0.40Ω XP Core 20-35W (included), in reality the biggest difference is only a less hot steam, the chipset sets it automatically to 30W, practically the battery autonomy doubles, liquid into tank lasts much longer and the aromatic yield is only slightly lower.

Pro:
Ergonomic
Elegant
Excellent finishes
Excellent battery autonomy
Simple to use
Interesting accessory line to make the Nuggett versatile
Very good performance of the supplied XP Core coils

Versus:
Lack of adjustable airflow

I liked the Nugget GT 200W device, so I recommend it, I recommend you put its accessories in the cart and you will not regret it.

I thank the sourcemore Online shop for sending me the product Artery Nugget GT Pod Mod Kit
ANGT code: Artery Nugget GT Kit 200W 8ml Pod Mod Kit with dual 18650 batteries

 

[Frenkyou]

To complete my review on the Artery Nugget Gt sent by Sourcemore today I describe two very interesting and functional items that transform a beautiful 200W Dual Battery Pod Mod into a super compact and equipped Mod / Box / Pod / Rta / Rda vaping system.
These two accessories were sent to me once again by Sourcemore Sourcemore.com - E-cigarette, Electronic Cigarette Online and I thank them.

Enjoy the reading

Artery Nugget GT 200W Adapter 510

The 510 Adapter arrives in this cardboard box, where the product image, slogan, logos, brands, bar code and content are shown.

Package content:
1 Nugget GT 510 Adapter

Weight:

This object is made of solid flame ......ant material, the steel cup takes up the color of the Pin 510 gold / plated.
The 510 pin is spring loaded and is insulated by a gasket, the connection has a smooth and well-made thread.

The bottom of the 510 Adapter faithfully copies the design of the original cartridge, the fit with the Nugget GT is perfect, this does not surprise me because the 510 Adapter is an Original Artery accessory.

There is huge space to install giant atomizers, but even smaller RTAs and RDAs can be elegantly accommodated given the compact form factor of the Nugget GT Pod.

Our Adapter 510 takes advantage of the attachments of the original pod and thanks to the clip it is equipped with it hooks to the lip positioned inside the mod. This Artery system perfectly holds both the cartridge and the 510 adapter. With this system there is no need for magnets, the two parts engage with precision and safety, the adapter can be easily extracted by pressing the small button.

No danger of falling even when lifting the Nugget GT from the Drip-tip.

I tried other 510 adapters on other Pods, but none of these guaranteed me the safety and quality of the original artery Nugget GT Adapter 510 Kit.
With this accessory installed, the Nugget GT is transformed into a powerful dual battery electronic box.
The reading of the coils is precise, good Artery you are promoted with full marks!

 

[Frenkyou]

Artery Nugget GT XP RBA.

This is another original Artery accessory that fits perfectly with the gigantic 8ml Pods of the Nugget GT.

The RBA Nugget GT arrived together with the previous Item directly from Sourcemore, thank you again.

The package contains: the image of the XP RBA kit, brands, logos, wordings regarding the brand, packaging list, security code, serial number and place of production.

Packaging list:
1 XP RBA
1 510 connector
2 pre-made coil 0.6 Ka1
1 Phillips screwdriver
2 spare Phillips screws
2 spare O-rings

The deck has the positive insulated and removable for cleaning.
The two turrets have well-made cross head screws, the side bulkheads effectively hold the resistance wire, just insert it and screw.
The hole under Coil has a diameter of 3mm, the slots for laying the cotton are of the open type.

The bell has a good sliding thread and can be easily unscrewed / screwed to the deck.
Bell / chimney dimensions: internal ø 13mm, depth 7.5mm, chimney outlet ø 10mm

The XP RBA + bell:
The XP RBA writing is highlighted above, below the deck / bell junction there are the slots for cotton to bring the liquid to the coil, below we can see a sealing O-ring and below there are two completely air-flow slots adjustable.
The two eyelets measure 7x2mm.

Below we can see the adapter with Pin 510 for the RBA.
This useful accessory allows you to initialize the resistance before putting the cotton.
The preheating of the coil can therefore be done with any electronic Mod, but also with our Nugget GT and with the other adapter installed seen previously.

The XP adapter for the RBA has two very smooth and unstitched threads, the upper one screws directly to the RBA, the lower one screws to any Mod.

I mounted the RBA on my Nugget GT and inserted the Coil, the leg fits well and the cutting of the excess thread is easy to perform.
The heating phase of the coil to remove any hot spots ...

Cutting the mustache of cotton is not a problem, they can be left long, once the bell is screwed just cut the surplus with scissors.
Wet the cotton with the liquid and do some activation.

This RBA allows you to use the huge pod tank of the Nugget GT, with obvious economic advantage.
The efficiency of the RBA is also very valid with the 0.6Ω coil.
By adjusting the air-flow it is possible to obtain a restricted / flavor Puff, at 18-20W, but there is the possibility of creating much stronger resistances, the space on the deck is sufficient to achieve them.

I also loved this accessory and it made my Artery Nugget GT a real bomb! Fun to use and configure, depending on the moment.

I thank Sourcemore for sending these accessories.

Link 510 Adapter: Artery Nugget GT Kit Replacement 510 Adapter 1pc
XP RBA Link Kit: Artery Nugget GT Kit Replacement XP RBA Coil 1pc