ASPIRE CLOUDFLASK

Status
Not open for further replies.

Frenkyou

Ultra Member
ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    Hello, today I welcome nice news.

    The Aspire Cloudflask can deliver up to 50W in By-pass mode.
    Once again Aspire amazes by demonstrating imagination and aesthetic taste, this time for its new electronic cigarette it has adopted the form factor of a whiskey-flask.
    These objects are sought after by collectors and generally attract the interest and sympathy of many people for their elegant and refined appearance.

    Enjoy the reading.
    --------------

    The cardboard packaging shows the image of the Cloudflask, the color indication and the slogan "Innovate the way you vape".
    The content is listed on the back, while on the side we can see the hologram, scratch and check .

    1.jpg


    In the box...
    Standard version:

    1 Cloudflask battery unit (2000 mAh)
    1 Pod Cloudflask (5.5 ml)
    2 Mesh: 0.25Ω
    1 Type C cable
    1 User manual
    1 Set of O-rings

    TPD version:
    1 Cloudflask (2000 mAh)
    1 Pod Cloudflask (2.0ml)
    2 Mesh: 0.25Ω
    1 Type C cable
    1 User manual
    1 Set of O-rings

    2.jpg


    Aspire Cloudflask Features:
    Dimensions with drip tip: 92x54x25 mm
    Weight 128gr
    Capacity: 5.5 ml
    Coil: 0.25Ω Kanthal Mesh range 40-50W
    Battery: 2000mAh integrated
    Charge: 2A
    Port: USB-C
    Output mode: bypass
    Charging indicator:
    Red LED equal to or less than 3.5 V (0-20%)
    Blue LED 3.5 - 3.8 V (20-50%)
    Green LED equal to or higher than 3.8 V (50-100%)

    3.jpg


    4.jpg


    You can choose between four colors:
    Black, red, gray and brown.

    5.jpg


    The ASP chipset has the following security features:
    Protection Overtime 10s
    Short circuit protection
    Low voltage protection
    Overload protection
    Overheating protection
    Overdischarge protection

    6.jpg


    The liquid level can be easily controlled from above through the transparency of the Pod.
    The bottom of the mod houses two torx screws and the vent holes of the internal battery.

    7.jpg


    Like a real wiskey flask, the Cloudflask re-proposes its forms.
    On the concave panel we find the slightly protruding Fire button with rounded corners, above it there are three notches that form the airflow grid.
    The rounded panel bears the word Cloudflask at the bottom.

    8.jpg


    9.jpg


    The sides are smooth and rounded, the lock / unlock buttons for the pod are opposite, the charging socket is Type-C 2A.

    10.jpg
     
    Last edited:

    Frenkyou

    Ultra Member
    ECF Veteran
  • Apr 26, 2019
    1,643
    1,658
    55
    italy
    www.svapo.it
    On the bottom of the compartment that houses the Pod we see a large round and sprung contact pin.

    The release mechanism for the cartridge uses two retaining hooks which can be operated via the two external buttons. To lock the cartridge, just press it down.

    11.jpg


    At present, a single 0.25Ω range 40-50W Mesh Kanthal AF is provided for the Cloudflask. Inside the package we find another spare.

    12.jpg


    The Drip-Tip 810 is rather low, has two o'ring for the seal and an antimicrobial band at the base.

    The Pod uses a pull-and-push coil replacement system. It is possible to change the coil even when e-liquid is present inside, there are no leaks when the quantity is less than 50%.

    The silicone stopper seals a hole of adequate size for the refill.

    13.jpg


    14.jpg


    How the Cloudflask works:

    Mod On / Off, five clicks on the fire button.
    The LED flashes white three times both on and off.
    If the puff is prolonged for 10s, the Overtime protection intervenes, the LED flashes purple 10 times and it is necessary to wait 10s to start vaping again.
    If the mod detects a short circuit, the supply stops and the LED flashes purple three times.
    When the mod exceeds 75 ° C / 167 ° F the led flashes yellow three times and the Cloudflask enters the cutoff.

    15.jpg


    The battery has a capacity of 2000mAH with Type-C charging, it is recommended to recharge the Cloudflask at 5V 2A. A complete charging cycle lasts approximately 80 minutes.
    When the Cloudflask is subjected to recharging, the LED flashes red three times, then it assumes the color combined with the residual charge status.
    State of charge: 50-100% the LED is green
    State of charge: 20-50% the LED is blue
    State of charge: 0-20% the LED is red
    When the voltage is low, the LED flashes red 15 times and needs to be recharged.
    When the battery is fully charged, the LED flashes green 20 times then turns off and stops charging.
    When the device detects a charging current equal to or greater than 6.5V, the power is interrupted to avoid damage to the battery.

    16.jpg


    The Aspire Cloudflask is made of stainless steel and boasts a microfiber case. The leather strap of the case is removable, thus offering three different aesthetic / functional configurations. The case is available in different colors.

    17.jpg


    18.jpg



    Family photo:

    19.jpg


    Conclusions:
    Aspire claims that the By-pass mode combined with the state of charge of the battery at a given point is the best solution to best power the 0.25Ω mesh coil supplied in the kit, he was right!
    I must say that the Aspire Cloudflask offers great cloud performance, despite its built-in battery is not that big and the power is limited to 50W. In fact, it manages to best manage the Mesh-Coil supplied in the kit. This coil has proven to be very flexible even with low charge levels.
    What is surprising is that it seems to vape with Aspire's Atlantis (One of the best) the performance is quite similar. The aroma is fantastic, you can produce clouds of dense vapor. The condensation that is the real enemy of these systems is completely negligible.

    Technically I really liked the Push / Off / On solution of the cartridge, really solid and safe. Aspire won against the usual magnets.
    The Chipset has a rapid power delivery, many safety protections and a valid battery management.

    Aesthetically, in my opinion Cloudflask deserves a high rating. Aspire proves once again to be an Asian company Leader for aesthetic taste and reliability of its products.

    I saw the proposed Cloudflask on the official website for $ 34.99.
    To the new converts, I would recommend this new small, performance and very fashionable product ...
    For its ease of use and to begin their journey towards freedom.
    With the 5.5ml tank I think even expert vapers will appreciate it.

    20.jpg


    Pro:
    AS chipset
    Aesthetic fantasy
    Dimensions and portability
    robustness
    Excellent performance in the Cloud
    Metallic mechanism for locking / unlocking the cartridge
    Replaceable Driptip 810
    E-liquid visibility
    Convenient refill
    Coil pull-and-push
    Minimum condensation
    Reload Type-C
    ASP protections

    Tips
    2,000 mAh are not many for the cloud.

    I thank Aspire for the opportunity of this Test: Aspire Cloudflask - Aspire® Official Site
     
    Status
    Not open for further replies.

    Users who are viewing this thread