Aspire nautilus - Again-Sorry

[Frenchfry1942]

I saw that video before...it is slow and I may have not paid enough attention. I re-watched it and the thing that seemed to be mentioned was the amount of condensation, juice, spittle, whatever that he kept brining up. I don't get very much of that. He also mentioned that the BVC worked better above 12-13 watts. I thought I tried that, but I will give it another try.

 

[williamclarkonet]

i take my Nautlius EVERYWHERE,all day

 

[Jdurand]

I just got an MVP2 and Nautilus tank with it. I have found that if you don't reassemble the Nautilus just right it will gurgle. The trick is to screw the top part on first, not so tight you break the pyrex, but pretty darn tight. Then when you have filed the tank and are ready to screw the bottom with the atty back on, (and here's the tricky part) you have to hold both the glass tank itself and the top part. You don't want the bottom to actually tighten or loosen as you srew on the bottom part. Once I got this technique down, no more gurgles. I also found you really need to tighten down the coil or head down real tight as well. Hope that helps.

 

[Trailz]

Been using the NM for a couple weeks now. Had one flooding incident resulting from the top cap loosening and losing vacuum. Since then no flooding whatsoever and it works great. I run 50/50 juice in my tanks.

 

[R1Barlow]

I now have 4 of the 5ml Nautilus tanks and love them. Only problem I've had was the BDC coils. Changing the the BVC coils fixed my problems.

 

[Guzz]

The biggest cause of gurgling with the BVC is to low of a voltage/wattage.

From Aspire:

Ohm (O)   Voltage (V)	Watts (W)
1.6       3.0 – 4.2	4 - 6.5
1.8       4.2 – 5.0 	< 15
2.0       5.0 – 6.0

So crank it up a bit, don't be afraid to hit the max to clear out the gurgling, then back down a bit to prevent burning.

 

[Trailz]

I'm running my NM with 1.8u coils at 11W on the MVP 2.0 with no burning. I really like these coils.