Atmizoo Roller/Dingo Chat, Tips, and Release Dates
- Thread starter b0redagain
- Start date
- th_trl_thread_readers 0
-
- Tags
- atmizoo dingo mechanical mod roller
- Status
Here's a pic of the Terminator on my Roller. I'm really liking this setup.
That looks awesome! I'm starting to try out some silica devices.. recently got a couple phoenix clones and an IGO-L and the flavor is just as good if not better than the mesh gennys. I got on the list for a prometey, a spheriod type rba from the Ukraine. I'm also going to get an A7 for my bottom feeder and get the "oid" for it.
Right now on the Roller, I've got the screw in the connector tightened as far as it will go, the rsst connector is as high as I can get it and still make contact.. there's a tiny gap still but this (OMG) button more than makes up for any tiny gap LOL. This button is great LOL
I'm not too worried about gaps. Those that are should just get Hybrids...haha.
Got this on the way out the door for work. Now I get to stare at it for 8 hours before really using it. *sigh*
Got this on the way out the door for work. Now I get to stare at it for 8 hours before really using it. *sigh*
It's gorgeous!! You know this is on my "gonna get when it comes in stock" list.. details! I want details LOL. I had a good vapemail day also.. I got this..
Got this on the way out the door for work. Now I get to stare at it for 8 hours before really using it. *sigh*
I'm loving my 69, it feels very well built. It feels great in my hands and preforms great. My Roller and 69 always fight for my attention, I can't make up my mind at times. My Roller looks at me and says, "Come on, I know you want to press me!! Come on!!!" lol
That thing looks awesome! It looks like what we'd be vaping after the apocalypse!It's gorgeous!! You know this is on my "gonna get when it comes in stock" list.. details! I want details LOL. I had a good vapemail day also.. I got this..
The button on the Roller is sweet! That's for sure
How is the button on the 69? Is it as smooth as the Roller?
I vape enough for about 7 mods to get equal time...so they all feel loved...haha.
Just playing with it right now and I'd say that it's a good button...not as smooth as the Roller but good.The button on the Roller is sweet! That's for sure
I might not get to find out LOL I made the mistake of showing my husband my new Moneypenny today. He looked at it and then at me and said "I thought you were done" Uh oh! He doesn't usually say much of anything about my stuff. I don't think it would be a good idea to show him the Roller that came yesterday!
i totally agree with b0redagain. the 69 is very nice and definitely still in the rotation, but the button isn't as smooth as the dingo. and i find the edges a bit sharp so it's a little painful to twist it off.
Hi Guys,
Any one run into a sticky button?
Have had my dingo for less than a month, but now the button is sticking
Can't really figure out why, nothing had happened that I can tell, no juice leaking or anything. It's really sticking bad; any suggestions?
Best,
Joe Shark
Any one run into a sticky button?
Have had my dingo for less than a month, but now the button is sticking
Can't really figure out why, nothing had happened that I can tell, no juice leaking or anything. It's really sticking bad; any suggestions?
Best,
Joe Shark
Seems like issue is with the Cobra :-\
I think, I've assisted the center pin on dingo and lifted Cobra up more and it's smooth. The Cobra just doesn't seem to like playing nice with the dingo; lol just like in the wild.
Best,
Joe Shark
I think, I've assisted the center pin on dingo and lifted Cobra up more and it's smooth. The Cobra just doesn't seem to like playing nice with the dingo; lol just like in the wild.
Best,
Joe Shark
Usually when my button is sticking, the button top is screwed in too tight to the inner tube of my roller. I usually make sure the 510 recessed connector is not screwed in too much and the inner tube is not too tight. You want the button to be soft when pressing it, if it's sticking or it's not smooth when pressing it, one of the 2 is the problem. I have a Cobra also and it sits flush to the 510 connector but there is a gap because the 510 recessed connector is raised up slightly unless you sand it down.
my husband and I went to Asheville today to help our daughter move. Of course I took the Roller. It was in the sleeve in my purse sitting between us. I smelled something... bad. I looked down and my purse was smoking! The button on the Roller was pressed in my purse and it was .. going. I reached over and grabbed it by the DID that was on it.. big mistake! The DID was scalding hot 
My drip tip that came with the DID had started to melt. Other than that, everything was alright. well.. not quite, I burned one of my finger tips and had to ride the rest of the way with my hand wrapped around my iced coffee to take the heat out. That smooth button is very very easy to activate!
I didn't use it the rest of the day and when I got home, I took apart the DID to make sure nothing was melted inside (insulators) (they weren't) My batt is OK too. It must not have been activated but for a few seconds.. just long enough to get hot and start melting the botton of my drip tip. So now everything works. Thank goodness I also took the moneypenny so I had something else to use.
Moral of the story... when not in use.. make sure that button of turned in the off position!
My drip tip that came with the DID had started to melt. Other than that, everything was alright. well.. not quite, I burned one of my finger tips and had to ride the rest of the way with my hand wrapped around my iced coffee to take the heat out. That smooth button is very very easy to activate! I didn't use it the rest of the day and when I got home, I took apart the DID to make sure nothing was melted inside (insulators) (they weren't) My batt is OK too. It must not have been activated but for a few seconds.. just long enough to get hot and start melting the botton of my drip tip. So now everything works. Thank goodness I also took the moneypenny so I had something else to use.
Moral of the story... when not in use.. make sure that button of turned in the off position!
Gave my little roller a good cleaning today after I upgraded to the silver spring contact, and put in a new internal switch. 0.19 voltage drop, wow. Nice.
- Status
Similar threads
- Locked
