Atmizoo Roller/Dingo Chat, Tips, and Release Dates

[donnah]

The EA has much more adjustability than the roller. with the Roller, there is a tiny screw down in the 510 connection that you can tighten to make the atty fit closer. tightened down all the way, there is still a very tiny gap between the top cap and the rsst/did/igo-l but it's not enough of a gap to bother me. The roller is nice, the button is smooth as butter and easy to turn on and off. But it performs just like the EA, no better no worse. If you want something really different..get on the list for the Moneypenny.. really unique, hand made, the top cap can be adjusted to have your wick anywhere you want it in conjunction with the button. BUT, my rbas don't sit flush.. again, not a bother to me. Like stated earlier in this thread, if you want something totally flush, you'll have to get a hybrid (or an EA )

I've been waiting for the Eric's edition 69 to come back in stock at Finnvape but since getting the moneypenny, I have 3 mechs and I really don't need another.

 

[Fury83]

I was thinking about getting a Dingo but then I found a G16 in stock, I really miss the one I sold so the Dingo got put on the back burner. I am interested to see what replaced the "Puppy" 14500 project at atmizoo.

I did find a use for my extra roller/dingo spring, I turned it into a button spring for my sturm.

 

[Gummy Bare]

The EA has much more adjustability than the roller. with the Roller, there is a tiny screw down in the 510 connection that you can tighten to make the atty fit closer. tightened down all the way, there is still a very tiny gap between the top cap and the rsst/did/igo-l but it's not enough of a gap to bother me. The roller is nice, the button is smooth as butter and easy to turn on and off. But it performs just like the EA, no better no worse. If you want something really different..get on the list for the Moneypenny.. really unique, hand made, the top cap can be adjusted to have your wick anywhere you want it in conjunction with the button. BUT, my rbas don't sit flush.. again, not a bother to me. Like stated earlier in this thread, if you want something totally flush, you'll have to get a hybrid (or an EA )

I've been waiting for the Eric's edition 69 to come back in stock at Finnvape but since getting the moneypenny, I have 3 mechs and I really don't need another.

Thanks for the info! I'll have to check out the money penny.

:: sent from android with tapatalk ::

 

[donnah]

Thanks for the info! I'll have to check out the money penny.

:: sent from android with tapatalk ::

I think I've already posted this picture in this thread but I'll post again so you can see how the rba's sit. Obviously on the EA.. you can sit stuff completely flush.. but since I like having the wick/air hole exactly where I want it, I usually make adjustments that end up with a gap. The rsst on the roller looks nice and I think that the "gap" is very tolerable to anyone, even those that are a bit ocd lol. The igo-l on the moneypenny looks great as far as I'm concerned.

I don't know what I'll do when the 69 comes back in stock. Right now, I'm pretty satisfied with my collection and have no desire to add to it. I love all my mechs and if I get another, someone is going to be sitting idle and right now, all my devices are in regular rotation. I have 3 provaris and unless Provape comes out with a really great new device that does everything the current version does AND runs sub ohm rbas safely, I'm not interested in getting another one of those either.

But then again, I'm a woman and that's gives me the right to change my mind at any time for no particular reason at all.

 

[donnah]

The different springs offered all have their pluses and minuses...none are necessarily better than another. You don't have to mod anything.

There is a blog post on Atmizoo explaining the springs.

Thanks! I read the blog post and feel better now

 

[Jaseruckus]

These are the springs that came with my Roller last week. they both look to be made out of the same material. I thought they'd sent and extra. Is one supposed to be better than the other? The whole reason I bought from Atmizoo and not some clone is to get the best and not have to mod it. I'm not too sure about spending this kind of money on something and then finding out later I could have/should have paid extra for "better" parts that would give better conductivity. If I was going to have to do that, I might as well have bought a cheap clone and sanded the contacts.

I remember in an old post made by Atmizoo mentioning that you can get the best conductivity by removing the hot spring and just putting a safety fuse in. I have tried it with both hot spring and with just a safety fuse. I honestly couldn't tell the difference vapewise. I can say that using sub ohms does wear down the springs faster. I noticed more heat coming from the bottom vent with a spring and after a month of use, I noticed areas of the spring being deformed. I only checked it because I noticed that my button started getting hot and knew it wasn't due to a short on the atty. Also without the spring, using it in 18650 mode or 18490, the mod was actually shorter which is kind of a plus.

 

[b0redagain]

I don't know what I'll do when the 69 comes back in stock. Right now, I'm pretty satisfied with my collection and have no desire to add to it.

That's how I felt now that I have the Roller, 69 Mod, and EA Mod...but then the Nemesis happened. I'll be buying one next week. But I justify it by selling off older stuff to pay for it.

 

[donnah]

That's how I felt now that I have the Roller, 69 Mod, and EA Mod...but then the Nemesis happened. I'll be buying one next week. But I justify it by selling off older stuff to pay for it.

yea but I don't have any older stuff that I want to sell off!

 

[donnah]

That's how I felt now that I have the Roller, 69 Mod, and EA Mod...but then the Nemesis happened. I'll be buying one next week. But I justify it by selling off older stuff to pay for it.

I really do think I'm done buying mechs. The whole reason I bought them was to run my sub ohm gennys. The DNA-20 chip will run a sub ohm coil with regulation (somewhat) and protection. It won't be long before someone (hopefully Provape) comes out with a quality tube mod that will run the low resistance genesis with regulation and safety. while I like running a genesis at .8 on a mech.. I like running one at 1.2ohms on a Provari just as much. So, I'd love to add an EE 69 to my collection, but I'd rather save my money and wait awhile and see what else is coming out. 3 mechs is plenty for me.

 

[b0redagain]

I really do think I'm done buying mechs. The whole reason I bought them was to run my sub ohm gennys. The DNA-20 chip will run a sub ohm coil with regulation (somewhat) and protection. It won't be long before someone (hopefully Provape) comes out with a quality tube mod that will run the low resistance genesis with regulation and safety. while I like running a genesis at .8 on a mech.. I like running one at 1.2ohms on a Provari just as much. So, I'd love to add an EE 69 to my collection, but I'd rather save my money and wait awhile and see what else is coming out. 3 mechs is plenty for me.

I understand your need...but my needs are completely different. I run all my mechs with Kicks...I buy them because they are beautiful mods and I get tired of the same old tubes produced by the US and China.

 

[donnah]

I understand your need...but my needs are completely different. I run all my mechs with Kicks...I buy them because they are beautiful mods and I get tired of the same old tubes produced by the US and China.

Ahhh.. now I understand your needs also LOL Yes, the highend mods are beautiful and I can't help but still have my eye on the EE 69 Are you satisfied with your kicks? I've never really been interested in them but the clone that's coming out might be interesting to try.

 

[b0redagain]

Are you satisfied with your kicks?

Yes, very much so. I vape everything between 8 and 10 watts, so they are perfect for me.

 

[porkchopharry]

Well...They ARE in stock right now. A few of them at least. I was so ...... at the Nemesis sale tonight and missing it, that I just happened to go to Atmizoo and lo and behold...I grabbed an Ice Matte Roller! They have Dingos and Rollers up in Ice Matte right now. Look like they have custom Rollers available, but you can only choose the Ice finish.

 

[b0redagain]

Yep...still a few more in stock.

 

[b0redagain]

Damn...didn't mean to get another Roller but I couldn't pass up an Ice Matte custom. Vape budget is now totally blown with buying the Nemesis and Roller in the same night.

 

[b0redagain]

Still some Rollers and Dingos in stock.

 

[Fury83]

Damn...didn't mean to get another Roller but I couldn't pass up an Ice Matte custom. Vape budget is now totally blown with buying the Nemesis and Roller in the same night.

Budgets were made to be exceeded.

 

[porkchopharry]

Dingo IM still in stock. Roller customs too, but I imagine the customs will be gone real soon. I could spend every penny I have on that site. It it so aesthetically pleasing and smooth flowing unlike some of the others. I wish I had ordered a Pecker, the Hive kinda floats my boat too. I don't even have the thing in my hands yet and I'm like the world's largest Atmizoo fanboy.

 

[donnah]

There's still some IM dingos and SS-custom Rollers in stock. This is the longest I've seen them in stock.

My Roller has started misfiring and I think it's due to my rsst leaking down into it. I watched the disassembly/assembly video but I haven't worked up the nerve to take it apart yet LOL. One thing I did notice at the tail end of the assembly video... they said that if you're using the recessed connection, like I am, to always take off the little o-ring around the tiny screw down in the 510 connection. I didn't know that. Hmmm... I just took it off and man was it a beast to get off! I was terrified that tiny would screw would go flying across the room (like so many of my parts do) and be lost forever. I finally took a straight pin to pry under it and got it out with no mishaps, but it's a miracle that I didn't stick that pin through a finger!

We'll see if that solves my misfiring issue..so far after the last few minutes, no misfires.

 

[b0redagain]

Did you get the misfires fixed, donnah?