Atmizoo Roller/Dingo Chat, Tips, and Release Dates

[porkchopharry]

I need to check that video out before my Roller arrives. Atmizoo shipped mine FAST - same day I ordered it. And damn it's already in Cinci, Ohio! I would hope that it would be here tomorrow, but I'm thinking Monday most likely.

They're all out of stock now FWIW. But I'm liking the way these guys do releases. Yes, I'm still obsessed with the Nemesis. Will The Roller kill that obsession? Dunno. I am that guy though that usually has to find "The One" and then I'm happy and I can sell the others I've picked up along the way.

 

[b0redagain]

I need to check that video out before my Roller arrives. Atmizoo shipped mine FAST - same day I ordered it. And damn it's already in Cinci, Ohio! I would hope that it would be here tomorrow, but I'm thinking Monday most likely.

Yeah, they do ship fast. Mine is in Cinci too...and my Nemesis (sorry for saying) is in Louisville, KY. Once it hits Cinci you will get it the next day...so today (Fri) it is.

Yes, I'm still obsessed with the Nemesis. Will The Roller kill that obsession? Dunno. I am that guy though that usually has to find "The One" and then I'm happy and I can sell the others I've picked up along the way.

I don't think a Roller will quench your thirst...though it is my favorite mod. I'm obsessed with everything Greek...apparently. I just ordered a Poldiac. I don't even want to think about how much I've spent on mods this week with the Roller, Nemesis, and Poldiac...along with some Terminators. Ugh...hopefully it ends soon.

 

[porkchopharry]

Haha! I'm obsessed with everything Greek too it seems! I am drooling over the GG's too! Hey, I guess it makes sense though in my case. My wife is Greek! Who knew they would be the Masters of such devices? I never even knew anything about Greece until I married my wife. But I know a WHOLE lot more now that I started vaping. And you are right, I will probably need to experience the Nem before I can ever get it off my mind. And the Poldiac. And the GGTS...

We now shall see how my wife reacts to seeing the Roller tomorrow. And me saying "But it's GREEK BABY!"....Nah she's cool.

 

[porkchopharry]

I haven't watched the Atmizoo switch disassembly video, but Todd has one on youtube. I love Todd's Reviews. He has slowly become my favorite reviewer.

Also if you read the comments he says: "Another wee tip, do it inside a plastic bag, that way when the spring goes flying you know where it is "

 

[donnah]

I need to check that video out before my Roller arrives. Atmizoo shipped mine FAST - same day I ordered it. And damn it's already in Cinci, Ohio! I would hope that it would be here tomorrow, but I'm thinking Monday most likely.

They're all out of stock now FWIW. But I'm liking the way these guys do releases. Yes, I'm still obsessed with the Nemesis. Will The Roller kill that obsession? Dunno. I am that guy though that usually has to find "The One" and then I'm happy and I can sell the others I've picked up along the way.

If you're not going to be home, tape a note to your door with your tracking number and your name or they won't leave it!

 

[RaymondK]

Are the new Dingo/Roller battery spring location has been changed or is the spring still touching the battery?

 

[b0redagain]

Still the same.

 

[b0redagain]

Vape mail...

 

[porkchopharry]

I'm a printer and my shop is out back, so I'm always home. Mine hasn't been delivered yet tough. Oh the Ice Matte looks lovely. I can't wait. On your custom did you get regular matte stainless on the inner tubes and the switch? I wish I had done this now sort of. I went online to check and see what it would cost to just order them and it's 1/2 the price of a roller. May as well just order another and mix and match. I'm wondering what would look good on top of the Ice Matte. I think I looked at getting a custom and all the tubes offered were Ice Matte as well? Dunno I was so excited to see it that I was all confused and hot and bothered, so I wasn't thinking straight.

Maybe we should do a group buy on spare tubes and parts one day to save on the stupid shipping? I was interested in the "more aggressive" button, but didn't recall seeing it on the site. I'd like a pecker too! If anyone needs parts, I'd possibly be down to go in and order myself some regualr stainless tubes and another button.

 

[donnah]

Haha! I'm obsessed with everything Greek too it seems! I am drooling over the GG's too! Hey, I guess it makes sense though in my case. My wife is Greek! Who knew they would be the Masters of such devices? I never even knew anything about Greece until I married my wife. But I know a WHOLE lot more now that I started vaping. And you are right, I will probably need to experience the Nem before I can ever get it off my mind. And the Poldiac. And the GGTS...

We now shall see how my wife reacts to seeing the Roller tomorrow. And me saying "But it's GREEK BABY!"....Nah she's cool.

My "Greek collection" now consists of the Roller, 2 DIDs and a GP spheriod. I was wanting the Eric's Edition 69 but I think I'm going to put all my concentration in getting a GGTS when they finally come out again. Right now I've got 6 devices (everything in my sig) sitting in front of me and I alternate using each one. When I go to the recliner to read, I usually take at least 3 with me LOL

I haven't been really interested in the Poldiacs for various reasons.

 

[porkchopharry]

It arrived and it is lovely. My RSST doesn't want to go on though? Anyone else experienced this? I can get it on maybe one turn and then it stops. Don't wanna force it. Everything else goes on just fine.

 

[Jaseruckus]

There might be a burr in the 510 connector threads. I had the same problem with my roller when I first got it. Try other devices and see if they will screw on. Unscrew the 510 recessed connector and try the rsst with the classic 510 connector and see if your having the same problem. If there is a burr in the threading, just grab a regular cartomizer and screw it into the 510 connector ( not on the roller but in your hands, use a cloth to grip the 510 connector ) pull while screwing in the carto and push while your screw out. Do this on both ends of the 510 connector. What I mean is screw it on normally and screw it on with the 510 upside down. The 510 is made of brass, so it easy to get the burrs out. If all fails, just hit up Atmizoo CS and they will help you out. They actually sent me a couple spares free of charge via DHL.

 

[Jaseruckus]

I'm a printer and my shop is out back, so I'm always home. Mine hasn't been delivered yet tough. Oh the Ice Matte looks lovely. I can't wait. On your custom did you get regular matte stainless on the inner tubes and the switch? I wish I had done this now sort of. I went online to check and see what it would cost to just order them and it's 1/2 the price of a roller. May as well just order another and mix and match. I'm wondering what would look good on top of the Ice Matte. I think I looked at getting a custom and all the tubes offered were Ice Matte as well? Dunno I was so excited to see it that I was all confused and hot and bothered, so I wasn't thinking straight.

Maybe we should do a group buy on spare tubes and parts one day to save on the stupid shipping? I was interested in the "more aggressive" button, but didn't recall seeing it on the site. I'd like a pecker too! If anyone needs parts, I'd possibly be down to go in and order myself some regualr stainless tubes and another button.

This is the only device I've seen that might match the finish of the Ice matte.

Richman Rebuildable Atomizer

It's priced the same as the RSST, the inside looks like that of a AGA-T. I don't mind if it performs like the AGA because I actually like the way the AGA-T vapes. I more interested how it will look on the Roller-IM, it has that simple shape to it that matches the Roller.

 

[tenshi]

This is the only device I've seen that might match the finish of the Ice matte.

Richman Rebuildable Atomizer

It's priced the same as the RSST, the inside looks like that of a AGA-T. I don't mind if it performs like the AGA because I actually like the way the AGA-T vapes. I more interested how it will look on the Roller-IM, it has that simple shape to it that matches the Roller.

I have a kayfun beta v3.1 that goes with it, looks almost identical ^^. Excuse the little gap, I was too lazy to adjust the positive post for the pic lol.

 

[Jaseruckus]

That Kayfun looks great on the IM. I might have to put that on my list......man this list is never ending. lol

 

[porkchopharry]

Yeah there's something weird going on with either the RSST or both connectors, the RSST just stops turning. Everything else goes on fine (AGA, carto, etc).

The RSST on the other hand, screws in perfectly on my EA mod, my Sigelei z-max, my drawtube and my Freight Train Mods pipe. So a mixture of "higher end" mods and "cheaper mods" and the RSST works fine on all of them. But not the roller.

When I screw in the AGA on the Roller, I can feel it stop for a second and then keep going. The RSST just stops. I tried to keep tightening (within reason of course) and the RSST got stuck on the roller connector (off the mod) and I had to take pliers to it.

I found somebody else on the forum who had the issue with an AC9, just need to find the thread again.

 

[b0redagain]

Oh the Ice Matte looks lovely. I can't wait. On your custom did you get regular matte stainless on the inner tubes and the switch?

I got Ice Matte for the switch housing and outer tube, then Natural Matte for everything else.

 

[b0redagain]

My "Greek collection" now consists of the Roller, 2 DIDs and a GP spheriod. I was wanting the Eric's Edition 69 but I think I'm going to put all my concentration in getting a GGTS when they finally come out again. Right now I've got 6 devices (everything in my sig) sitting in front of me and I alternate using each one. When I go to the recliner to read, I usually take at least 3 with me LOL

I haven't been really interested in the Poldiacs for various reasons.

That's a good collection. The GGTS never interested me...I just don't think it looks good.

 

[donnah]

It arrived and it is lovely. My RSST doesn't want to go on though? Anyone else experienced this? I can get it on maybe one turn and then it stops. Don't wanna force it. Everything else goes on just fine.

You might not want to use the RSST on the Roller anyway. If yours is like mine, it leaks just a drop here and there.. the Roller switch doesn't like leaky attys. My RSST doesn't leak enough to cause a mess but it was enough to get into the 510 connection of my Roller. I probably need to take my switch apart now. I use my RSST on the EA mod because the EA is easy to take apart, wipe the pin off and pop it back in.

 

[joeshark]

Yeah there's something weird going on with either the RSST or both connectors, the RSST just stops turning. Everything else goes on fine (AGA, carto, etc).

The RSST on the other hand, screws in perfectly on my EA mod, my Sigelei z-max, my drawtube and my Freight Train Mods pipe. So a mixture of "higher end" mods and "cheaper mods" and the RSST works fine on all of them. But not the roller.

When I screw in the AGA on the Roller, I can feel it stop for a second and then keep going. The RSST just stops. I tried to keep tightening (within reason of course) and the RSST got stuck on the roller connector (off the mod) and I had to take pliers to it.

I found somebody else on the forum who had the issue with an AC9, just need to find the thread again.

Had the same issue with my Cobra and dingo; I fixed the problem by getting rid of the Cobra. No more thrashing issues. If it's not good enough for my dingo, it's not good enough for me.

Best,
Joe Shark