atties lenght

[emonty]

Just a thought and a question:

what is the reason for the length of the atties..I wonder what will happen if I cut them in half, for instance the 801..it is great but why not shorter

 

[Mist_Of_Joye]

Just a thought and a question:

what is the reason for the length of the atties..I wonder what will happen if I cut them in half, for instance the 801..it is great but why not shorter

Beware for if you cut the 801, the mouthpiece will not fit anymore

 

[emonty]

Beware for if you cut the 801, the mouthpiece will not fit anymore

Ok thxs for the tip (haha tip ;-)) but that is not the reason why they have that length..

 

[Lisaf01]

I assumed the 801 is that long precisely to accomodate that larger cartridge capacity.

 

[emonty]

I assumed the 801 is that long precisely to accomodate that larger cartridge capacity.

In that case it can be shorter when you only use the mouthpiece and drip
Make it 2/3 shorter and create a mouthpiece that fits and one can drip in easy without taking it off. I am lazy and in terms of size, length etc when it comes down to vaping it should be sized to it's bare limits, taking away all useless parts

Ps: just did it with one: 3/4 gone and use as tip a silicone top from a cartomizer were I placed a hole in. That way I can drip through the mouthpiece.. ;-) The draw is very nice and strong, taste is also fine and vape is very strong.

The original mouthpiece when dripping is not so great anyway, it tend to get loose over time because of removing it often when dripping

 

[vapn]

Why not just use the 901... ?

 

[emonty]

Why not just use the 901... ?

Because I have the adjustable draw adapter and the HV 6V/7.2V 801 atties

 

[vapn]

oooo I see now... OK That makes sense to me now. Maybe you could just try this on one of them and see how it goes. Be sure you file down the end so you don't cut your lip on them after you cut it. You might use a tubing cutter for plumbing to make this task easier. And I am pretty sure the mouthpiece will not fit right because there is a slight taper to them. Let us know how it works out for ya emonty.

 

[emonty]

The silicone tip is very tight around the top of the attie wich makes it even better then the regular tip: no false air coming through!! Also dripping on the hole is fine, it acts like a small cup with a hole where the juice just "slides" in. no problem with sharp edges either , even if it is a little sharp, the silicone tip takes care of the "softness" I like it!!!!

 

[vapn]

Could you post a pic of this set up emonty? I am wondering what this silicon tip is you are referring to here.

 

[emonty]

ok, here you are

 

[emonty]

And a dripping bottle where you have a reservoir for three or four drops should be not that difficult to make, to make it even easier for the drippers out there. If you go to a bar they have that system already where each "shot" is each time measured when you turn the bottle

 

[vapn]

OK... that should work fine...

 

[emonty]

yes, it does! no loose tip, no false air, shorter attie and dripping through the mouthpiece.

I made four!!!! improvements whoeaha!!!!!!!!!!!!

 

[vapn]

Nice work emonty. I will try this as well. I am not fond of the length of the 801 and this might make them a little better.

 

[emonty]

Nice work emonty. I will try this as well. I am not fond of the length of the 801 and this might make them a little better.

Thank you! I appreciate your comment, as you are a pro. Really this is really great, 801 on 6 V was superb, but now it is even better and it also looks better too!!!!

 

[Lisaf01]

I see what you mean now and why you're doing it.
Nice innovation, emonty.

 

[emonty]

I see what you mean now and why you're doing it.
Nice innovation, emonty.

And such a comment from you Lisa, that makes me blush

PS: I just squirt very quickly into the attie through the hole, as it has a very big bridge it does not matter if you put in a few more drops!

 

[imeothanasis]

exellent emonty, I really liked this my friend, good work!!!!

 

[emonty]

exellent emonty, I really liked this my friend, good work!!!!

Imeo!!! the Creator himself: I bow down to you, you are really the one that got me inspired, bacause of you I quit smoking two packs a day. Whatever I can contribute and help others with is solely because of you, thank you!!!!