auto battery question

[dogpound9219]

exactly what in or around the auto-batteries make them auto...is it a part i can get or add to my mods?

 

[Rocketman]

Vacuum switch in some, microphone in others.
Bet you could steal the circuit, add a better mosfet switch and have a big battery auto

 

[kinabaloo]

Use an old atty tp prise out the connector; use about a 2mm gap (not tightened all the way) and gently force the join sideways, one way the another. Once out, remove cap from other end, put in a small ball of cotton wool or tissue paper as cushioning and use a blunt ended rod of some king to push the innards out. The first thing out is the black plastic membrane containg air-pressure sensor, with two pins going into the connected mini circuit board (has the protecton circuitry and logic for charging, drag time, etc, plus mosfet).

Works ok with 901 / 808 baat.s which have a protruding connector.

Two alternatives :

I like to do touch switches with one contact being the cartomiser casing.

Another auto-like way is by mounting the connector on a light spring.

 

[ScroungerLee]

I thought it was an auto battery if it was intended to be used in an automobile.

Sorry, held off as long as I could before saying that...

 

[dogpound9219]

ur an idiot

 

[jrm850]

There is a thread in here somewhere where I was playing around with a vacuum sensor that could be an option for you. the Sensor was a Freescale mpxv7025g.

 

[pailpoe]

Yes, use freescale sensor. I recommend.

 

[dogpound9219]

ok cool sweet ty