Avid Vapor-- Aero Bridgeless Atty

Status
Not open for further replies.

jkoppk

Super Member
ECF Veteran
Apr 16, 2011
437
127
55
hanover,PA.
I just got my LR 510 Aero bridgeless atty from avid vapor today.First thing I did was meter it and it reads between 1.4 and 1.5 ohms which is good.I gotta tell you when I look at it beside the HH .357 the insides almost look exactly the same.Same cup,same steel wool looking material wrapped around the cup,and the coils are close too but this one is shorter and fatter.I can only hope the performance will be as good too LOL.I will post after I fire it up for a few hours,time to try this thing.
 

jkoppk

Super Member
ECF Veteran
Apr 16, 2011
437
127
55
hanover,PA.
supply some pics of the internals

Wish I could but I don't have a working camera.So far this atty hits pretty nice,I filled it with Ikenvape RY4,something I know and let it soak for about a half hour before vaping.At 3.7 volts it's pulling 2.2 amps from my digital power supply passthru,thats a little over a 8 watt vape.The RY4 tastes as good as it has in any other 510 atty I have used and it has a good throat hit and lots of vapor.I can't wait till it's broke in,if it gets better I will be real impressed.
 

Tripster

Super Member
ECF Veteran
May 21, 2011
741
559
Wish I could but I don't have a working camera.So far this atty hits pretty nice,I filled it with Ikenvape RY4,something I know and let it soak for about a half hour before vaping.At 3.7 volts it's pulling 2.2 amps from my digital power supply passthru,thats a little over a 8 watt vape.The RY4 tastes as good as it has in any other 510 atty I have used and it has a good throat hit and lots of vapor.I can't wait till it's broke in,if it gets better I will be real impressed.

Keep us informed on your results please.
 

jkoppk

Super Member
ECF Veteran
Apr 16, 2011
437
127
55
hanover,PA.
Well I have used this atty on my BuzzPro for about 4 hours now and it's got a little better but I don't know if it's fully broke in or not yet.One thing I will tell you is for this atty to hit well and not go dry you have to use a med to hard draw.If not you will get a burnt hit in your throat because juice doesn't get to the coil.It works kinda like the .357 and all the juice goes into the material surrounding the cup and down inside the atty under the cup,hence the med to hard draw to get the juice to the coil and keep it wet.At 4.2 volts the vape is very warm with huge vapor and good flavor,but I like it better at 3.7 and 3.3 volts where the vapor is cooler and has a bit more flavor.Oh and it still gives great vapor at 3.7 and 3.3 too.I can't wait to try the 306 version Aero to see how it performs compared to this one.Later.
 

guitardedmark

Ultra Member
ECF Veteran
Sep 20, 2010
1,102
7
Minneapolis, MN
www.myspace.com
So from the description on the site it sure does seem that these are just the same as the cisco 1.5 510's minus the bridge and wick. Is there anything else that you have noticed that is different from the 1.5 510 and do you have one to compare it to?

From what I've heard they have better airflow to allow more oxygen to get to the juice and coil which should create better vapor. It also should have a thicker wick in the coil to hold more joose.
 
Last edited:

Sinlak

Senior Member
ECF Veteran
Verified Member
Jul 28, 2011
259
44
38
Orange County, CA
I tried the aero 510 at lr, vapor wasnt great, taste wasnt great, I either flooded it or got dry hits. Im sticking with 306 nothing seems to hold up against 306 for overall vape (waiting on the i06 now ;p)

edit: overall every 510 I have tried at LR or HR seems to let me down so im not bashing on aero, just sharing my experiance. I guess I might be use to a certain quality of vape in my cisco 306s and 510 dosent seem to match what IM looking for.
 
Status
Not open for further replies.

Users who are viewing this thread