Azeroth RTA (Styled / Clone) for 12 bucks!!!!!!!!

[Gahh]

Like an addict at a meeting, I figured I'd share,,,,,
I was waiting and anticipating the arrival of my Azeroth Styled rta from fastech. (2 weeks exact from order date,,, NOT BAD.)

WELL, This (Styled) Azeroth has all the markings on the box of the real thing!!!

And at first glimps inside the box,,,, still looking good!!!

All the markings are looking pretty good!!!

And here is what I was really waiting on.... The Three Headed Coil !!!!!!

And it's a top filling RTA, and the fill holes are huge!!

Here's the Three Headed coil before.>>>>>>>>>>>>>>

And after.. 24ga. Kanthal > 8/7 Wrap on 2.5mm jig > 0.185 ohms

Can't tell from this picture but all (3) coils are lighting up evenly......

All wicked up and reading 0.18 on the meter!!!

And so all in all....
Can't imagine the real Azeroth by Coil Art being any better than what I got for $11.88.
All the threading was decent.... All the markings were as of the real deal....
The PRO'S >>>>>
The air flow, (when opened all the way), flows easier than the Smok's Beast family. And can be tamed down to a Nautilus Mini.....
My first build, wicking perfectly after 5 hours (with no leaks). {I'll be back tomorrow on this pointer to see what it does after a full day}
The taste is all there.
The CLOUDS are all there. ( Heck, I couldn't see the key board for 30 seconds after my last hit.)
Anyone who want to build on a different coil base has to spend 12 bucks on this and wait a few weeks, you'll love it!!!!
The CON'S > Goes through juice faster than my F150 uses Flex Fuel (E-85).
NOTE: Heard a few complaints about coil set screws stripping. Not a problem here on my first build.

 

[Heartsdelight]

Like an addict at a meeting, I figured I'd share,,,,,
I was waiting and anticipating the arrival of my Azeroth Styled RTA from Fastech. (2 weeks exact from order date,,, NOT BAD.)
View attachment 684635
WELL, This (Styled) Azeroth has all the markings on the box of the real thing!!!
View attachment 684637
And at first glimps inside the box,,,, still looking good!!!
View attachment 684639
All the markings are looking pretty good!!!
View attachment 684641
And here is what I was really waiting on.... The Three Headed Coil !!!!!!
View attachment 684643
And it's a top filling RTA, and the fill holes are huge!!
View attachment 684645
Here's the Three Headed coil before.>>>>>>>>>>>>>>
View attachment 684647
And after.. 24ga. Kanthal > 8/7 Wrap on 2.5mm jig > 0.185 ohms
View attachment 684649
Can't tell from this picture but all (3) coils are lighting up evenly......
View attachment 684651
All wicked up and reading 0.18 on the meter!!!
View attachment 684653
And so all in all....
Can't imagine the real Azeroth by Coil Art being any better than what I got for $11.88.
All the threading was decent.... All the markings were as of the real deal....
The PRO'S >>>>>
The air flow, (when opened all the way), flows easier than the Smok's Beast family. And can be tamed down to a Nautilus Mini.....
My first build, wicking perfectly after 5 hours (with no leaks). {I'll be back tomorrow on this pointer to see what it does after a full day}
The taste is all there.
The CLOUDS are all there. ( Heck, I couldn't see the key board for 30 seconds after my last hit.)
Anyone who want to build on a different coil base has to spend 12 bucks on this and wait a few weeks, you'll love it!!!!
The CON'S > Goes through juice faster than my F150 uses Flex Fuel (E-85).
NOTE: Heard a few complaints about coil set screws stripping. Not a problem here on my first build.

Thanks for posting!

 

[johnnyelevator]

Here's the original. I got mine 2 weeks ago. I'm always slow on my first build. Checking airflow, making sure it don't short out, etc. But this one took close to an hour to coil and wick.
The vape on the 3 coil deck is good, but not amazing. I don't think it's worth the build hassle and juice consumption. I'll probably try the velocity deck next.
I do love the look of the gold one. But I didn't like the metal drip tip/top cap, so I switched to the black delrin one.
Enjoy yours. If you find the vape experience to be excellent, share with us your build. Maybe I need to switch mine out.

 

[Gahh]

Here is my update after a day's use.
Yes it did leak. Not to much, but enough that I need to do something before putting it away for the night. I unscrewed the base and decided to try adding cotton to the lowest part of the juice port, (rather than do a full re-wick.)
With cotton the size of a lint ball, I pushed it from the top down with a piece of 24ga. wire. I did this to all 3 ports.
It worked beautifully, without interfering with proper wicking.
In the morning there was no juice on the mod deck or bottom of the tank base.....
I have to say this is a nice tank. With the right price.
One of the smoothest adjusting airflow rings I've used to date, which stops at the end.
For those who like RDA's with WIDE OPEN AIRFLOW,, This tank is a must.
( And you won't need to drip....)
With the 0.184ohm build, the sweet spot on my Alien 220 is 64watts, set on Soft Strength. ( I truly like the strength setting feature on the Alien, |Soft-Normal-Hard|. I thought at first it was silly. It adds a nice adjustment to the vape experience.
The AZEROTH Styled RTA Rebuildable Tank Atomizer gets a full 2 thumbs up.
$11.88 AZEROTH Styled RTA Rebuildable Tank Atomizer - 4.5ml / stainless steel + glass / 24mm diameter at FastTech - Worldwide Free Shipping

 

[Gahh]

Here's the original. I got mine 2 weeks ago. I'm always slow on my first build. Checking airflow, making sure it don't short out, etc. But this one took close to an hour to coil and wick.
The vape on the 3 coil deck is good, but not amazing. I don't think it's worth the build hassle and juice consumption. I'll probably try the velocity deck next.
I do love the look of the gold one. But I didn't like the metal drip tip/top cap, so I switched to the black delrin one.
Enjoy yours. If you find the vape experience to be excellent, share with us your build. Maybe I need to switch mine out.

I'm liking the Gold one.....
I'm just not a fan of the Clapton coil. IMO, To much power needed to run them and the Tank gets a bit hotter than I like.
BUT OHHHH NOOOO... Here I go again tapping out my plastic card.........................
The photo's look great !!!!!!! Also Liking the Sigelei.......

 

[Gahh]

I've used the Azeroth 4 out of the last 5 days, with Sunday installing new wicking.
The second time wicking this, was the same as the first. ( It leaked a bit. ) I did the same thing I stated above, ( added small lint sized pieces of cotton. ) Pushed them in to the bottom of the wicking ports with a piece of 22ga wire. ) This stopped the leaking the fist time, and it worked the same on Sunday.
You Tube video's ( as for all bottom wicking RTA's) always showed the cotton being tucked into the wick hole ever so lightly. Not touching the base.
The fact is, It works fine pushing the cotton down to the coil base deck. Never got a dry hit, just a few times there was a less then juicy vape.
Next time re-wicking, I'll remember to leave the wick a little longer.
I do have the gold one ( as johnnyelevator shows above ) in my cart at the moment.
Remember, the cost of 2 Azeroth's = 1 Smok baby beast.
And the Azeroth gives an identical vape to the Smok beast when using the Smok RTA head.
Within the next week, I will take pictures of a coil / wick build on my Troll. ( Got it the same day as the Azeroth, just never fired it up. )