Battery and charger help

Status
Not open for further replies.

edyle

ECF Guru
ECF Veteran
Verified Member
Oct 23, 2013
14,199
7,195
Port-of-Spain, Trinidad & Tobago

VapieDan

Vaping Master
ECF Veteran
Verified Member
Nov 30, 2013
3,295
4,029
Flint, Michigan, United States

powerband

Ultra Member
ECF Veteran
Feb 9, 2014
1,129
9,894
Arizona
looks like you can use an 18350 (short battery) or the longer 18650 batteries.

a Nitcore charger will work fine for you. > http://www.mtbakervapor.com/accessories/nitecore-intellicharger-i2/

"The K100 is "Kickable." Dimensions: * 18350: 99mm/ 3.9 inches tall * 18500: 113mm/ 4.4 inches tall * 18650: 129mm/ 5.0 inches tall "

hope this helps you out
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
So looking on Amazon (giftcard) I found these:

Amazon.com : Two Panasonic NCR18650B 3.7V 3400mAh Rechargeable Li-ion Batteries QTY 2 : General Use Batteries : Electronics

These should be okay to use I'm hoping, will probably buy a kick as well

Nope, sorry, not those batteries if planning to use a Kick. :unsure:

These are not "high drain" batteries (which are required to use with a Kick). These are a hybrid battery with their chemistry heavily weighted to the ICR end of the chain, so practically speaking they should be considered ICR's. These are not recommended for a Kick, or should you ever consider using a rebuildable atomizer on your K-100 mechanical mod. This goes for the Panasonic NCR18650A 3100mAh batteries, too.

I recommend that you buy authentic AW IMR (Li-Mn) batteries from RTD Vapor.

AW IMR 18650.jpg

I recommend an Xtar WPII or Nitecore Intellicharger i2. Both are good quality, affordable 2 bay chargers.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread