Howdy,
I just received a new Provari w/ extension 3 days ago. I really like the exterior fit and finish, however am wondering if it is not operating as well as it should. It vapes great, but the battery life seems to be lacking. I would really appreciate your guys' input.
I've been running it with two AW IMR 18650 2000mah batteries that are brand new also. I have tried two different mini novas, both at 2.9 ohms according to Provari. I run the device between 4.7 - 4.9 volts.
I am only getting around 8-10 hrs out of the device before it shuts off. This equates to 4-5 mls of juice per battery. I have to use almost 2 full batteries a day. My vision 1300 spinner seemed to last about this long (probably the main reason for my upgrade).
When I pop in a new battery, the device will read 4.0-4.1 volts. At this same time my mutimeter reads 4.16-4.18v.
The light starts flashing at 3.5 volts according to the Provari.
Before the battery dies, the last reading I get on the Provari is 3.4 volts. By the time it completely shuts off, my multimeter still registers the battery at 3.63 volts.
I have also received one random E8 message. I have cleaned the center pin with alcohol, cleaned the threading, and finally bathed the inside in isopropyl as per the instructions. The center pin already has a dark spot which I can not remove. When I look inside with a flashlight it looks more like the coating has chipped away than like there is residual build up. Is this normal?
How long does your Provari last on a single charge for you guys? How many mils of juice do you use in that amount of time? Approximately how many watts are you running? What capacity battery?
Is my beautiful machine jacked up?
I just received a new Provari w/ extension 3 days ago. I really like the exterior fit and finish, however am wondering if it is not operating as well as it should. It vapes great, but the battery life seems to be lacking. I would really appreciate your guys' input.
I've been running it with two AW IMR 18650 2000mah batteries that are brand new also. I have tried two different mini novas, both at 2.9 ohms according to Provari. I run the device between 4.7 - 4.9 volts.
I am only getting around 8-10 hrs out of the device before it shuts off. This equates to 4-5 mls of juice per battery. I have to use almost 2 full batteries a day. My vision 1300 spinner seemed to last about this long (probably the main reason for my upgrade).
When I pop in a new battery, the device will read 4.0-4.1 volts. At this same time my mutimeter reads 4.16-4.18v.
The light starts flashing at 3.5 volts according to the Provari.
Before the battery dies, the last reading I get on the Provari is 3.4 volts. By the time it completely shuts off, my multimeter still registers the battery at 3.63 volts.
I have also received one random E8 message. I have cleaned the center pin with alcohol, cleaned the threading, and finally bathed the inside in isopropyl as per the instructions. The center pin already has a dark spot which I can not remove. When I look inside with a flashlight it looks more like the coating has chipped away than like there is residual build up. Is this normal?
How long does your Provari last on a single charge for you guys? How many mils of juice do you use in that amount of time? Approximately how many watts are you running? What capacity battery?
Is my beautiful machine jacked up?
Last edited: