Best 18350 and 18500 batteries for mech mods?

Status
Not open for further replies.

Glenn_K

Super Member
ECF Veteran
Verified Member
Sep 29, 2013
994
580
Toronto
Hey guys,
I have been using 18650 batteries in my king clone for sub ohm vaping. However, the size

Greetings, welcome to the forum. Below is a past post by Baditude on this topic, after the following blog on battery safety: http://www.e-cigarette-forum.com/forum/blogs/baditude/4848-9-battery-basics-mods-imr-protected.html

You can't go wrong with AW IMR batteries. The Panasonic & Orbtronic hybrids are also a good choice, although the 3400 mAh Panny should only be used for mechanical mods with only clearomizers or cartomizers due to its 6.8 amp limit.


AW IMR
18650 2000mah 10Amp CDR
18650 1600mah 24A

MNKE IMR
18650 1500mah ​20A

Panasonic ​or Orbtronic hybrid
CGR18650CH (IMR/hybrid) 2250mAh 10A
NCR18650PD (LiNiCoAl) 2900mAh 10A
Orbtronic 18650 SX22 (hybrid) 2000mAh 22A

Samsung hybrid (LiNiCoMnP)
INR18650-22P 2200mAh 10A
INR18650-20R 2000mah 22A

Sony
us18650v3 IMR 2250mAh 10A
us18650vct3 (hybrid) 1600mAh 30A

Efest IMR
18650 (IMR/hybrid) 2250mAh 10A
18650 2000mAh 10A
18650 1600mAh 30A

* AW IMR 18490 (1100mah) 8.8A

*AW IMR 18350 ​(700mah) 6A
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,077
71
Ridgeway, Ohio
Thanks for posting that Glenn. :)

I don't know when that was posted, but the AW 18490 IMR 1100mAh has a 16 amp continuous discharge rating. There has been differing specifications on this battery depending upon the sources, but AW himself posted in one of the battery forums it is 16.5 amp with a C rating of 15C.
 
Last edited:

Glenn_K

Super Member
ECF Veteran
Verified Member
Sep 29, 2013
994
580
Toronto
My pleasure ;)

Thanks for posting that Glenn. :)

I don't know when that was posted, but the AW 18490 IMR 1100mAh has a 16 amp continuous discharge rating. There has been differing specifications on this battery depending upon the sources, but AW himself posted in one of the battery forums it is 16.5 amp with a C rating of 15C.
 

ryanlee3po

Full Member
Feb 5, 2014
6
0
California
I've been told that a higher constant disharge rate (amps) is more favorable so i am thinking the efest (30A), sony (30A), Orbtronic (22A), or the AW (24A). Out of these 4, which would you guys suggest as the "best" as far as quality and performance? also keep in mind that my mod is known to reject flat tops so they would have to be button top. thanks for all the replies as well!
 

*deleon517*

Ultra Member
ECF Veteran
Verified Member
Jun 29, 2012
1,340
476
s. florida
I know the sony 30amp vtc4's I have are flat top, not sure about the vtc3's which are also 30amp but slightly lower mah. The AW was my favorite for a long time, never tried the efest as I ordered some but they were lost in the mail. orbtronics are pretty popular but I never ordered them. The sony's are my favorite between them and the AW's
 
Status
Not open for further replies.

Users who are viewing this thread