Best RTA?

[bananadon]

Hey everyone! Been vaping for a few months and just picked up my tobeco stillare clone. While I love the thing, the constant dripping has been getting on my nerves and I've been thinking about picking up an rta. I'm trying to find the best one. I want something that can keep up with a rda in vape production (I know it will be less, but maybe similar?) And has a medium-airy draw (or adjustable airflow) I've been looking at the squape, taifun gt, kayfun 3.1, or focgger v4. Anyone have experience with any if these and prefers one over the other?

Thanks!
-Aden

 

[pwheeler]

It's hard to find a tank in my opinion that can compare with dripping in flavor and vapor production. If you like the dripping, but hate to drip, you ought to check out a Reo. It carries the juice onboard and uses bottom fed RDAs. Check it out.

 

[Shootist]

Kayfun Lite + V2 clone from EHPro.

 

[RWClark]

Let the flames begin, but I really love the Expromizer. Much better airflow and hit then the Kayfun IMHO.

 

[The Ocelot]

I have an authentic KFL+ and a "Black Edition" KF clone, both of which have performed well for me, but I am completely addicted to the Rüzgar. I've barely vaped any other RBA since I got it. The build is easy, the deck is similar to a Kayfun, but the inside design is different. The thing is a flavor monster! And I say that as a Reo owner. The authentics are pricy, but worth it to me; I bought a second one. There is a clone on FastTech, which one of my friends got. He had a chance to compare it to an authentic and said that while the clone was good, an authentic is on his shopping list.

 

[autobiogphnation]

Most will say kayfun, which is not bad. It's a easy build, but too many parts for my liking and glass mid section would be a plus over the plastic/steel. I'm enjoying smok rsbt currently. Its cheap ($40 at gotvapes), simple glass tank with steel cover, similar to older fogger designs.

 

[bananadon]

Although I know the Reo is a hell of a deivce, it just isn't in my radar. It's too expensive and, to be frank, I can't stand to look of it.

 

[Susan~S]

Although I know the Reo is a hell of a deivce, it just isn't in my radar. It's too expensive and, to be frank, I can't stand to look of it.

Maybe you've never seen a REO Woodvil!

 

[bananadon]

Maybe you've never seen a REO Woodvil!

View attachment 369446

I'm just not a huge fan of box mods

 

[DoubleEwe]

I would suggest getting a Pontus by EHPro.

I do not have one, but really want one. They are basically a dripper with a tank above it. There is a thread about them on this forum, just search "pontus".
It uses the Tobh deck, you press down on the drip tip to allow some juice into the dripper chamber. It is like a better version of the 3D or a far cheaper (and less of a bugger to fill fully) version of the Big Dripper.

Other than that, maybe an Orchid (dual coil Kayfun type thing).

 

[Garym93]

I just got an orchid. I really like it a lot. I was going side to side with people dripping at the store today and I didn't look out of place by a long shot. Build mine at .67 ohms no dry hits even at 35+ watts on my ipv2. Only problem? No fill port. Gigantic issue in my opinion. I now use a syringe to fill it from the bottom with the base unscrewed just enough. I do like it though. Lmk if you have any questions


Sent from my iPhone using Tapatalk

 

[Bunnykiller]

Maybe you've never seen a REO Woodvil!

View attachment 369446

its still a box tho...

 

[Majigy]

The Tilemahos by GG.

 

[ScubaMatt]

The REO is a great little device.

 

[Shootist]

The REO is a great little device.

Although is might be the best device for you it is still a Mech and a box mod. Neither appeal to me or the OP.
Also it is, IMHO, way to expensive for what it is. But then most Mech's, IMHO, are way overpriced.

Just sayin.

 

[ScubaMatt]

I don't own one, My son does. I prefer mechs , DNA and SX350 devices. I like Kayfuns and Russians on top of any device. RDA's on the weekend.
OP I tired the new Fogger 4.1 its better than the older version I had but it's still a bit finicky for a first time rebuildable. The Kayfun and Russian are much easier to build.

 

[MidwestGuy]

I love my EHPro Kayfun clones ... easy to build, and great flavor with a micro coil as close to the air inlet as possible and Japanese organic cotton wicks. I also like the looks of them, I have a black and a stainless, both look great sitting on top of my little VaporShark rDNA.

 

[bananadon]

I would suggest getting a Pontus by EHPro.

I do not have one, but really want one. They are basically a dripper with a tank above it. There is a thread about them on this forum, just search "pontus".
It uses the Tobh deck, you press down on the drip tip to allow some juice into the dripper chamber. It is like a better version of the 3D or a far cheaper (and less of a bugger to fill fully) version of the Big Dripper.

Other than that, maybe an Orchid (dual coil Kayfun type thing).

Looks interesting! It seems to be out of stock just about everywhere, looks like I get to play the waiting game!

 

[smgrundy]

I use a Kayfun Lite, Russian 91%, Fogger V4, Tai Fun clone, and an eXpromiser. I love them all but I can honestly say I've used the eXpromiser more than any of them...but they're all great. The Fogger is probably my least favorite out of the group, but still works well...

 

[bananadon]

I just got an orchid. I really like it a lot. I was going side to side with people dripping at the store today and I didn't look out of place by a long shot. Build mine at .67 ohms no dry hits even at 35+ watts on my ipv2. Only problem? No fill port. Gigantic issue in my opinion. I now use a syringe to fill it from the bottom with the base unscrewed just enough. I do like it though. Lmk if you have any questions


Sent from my iPhone using Tapatalk

Hmm, I wish the pyrex piece was a clear glass. It just looks a little cheap with the fogged. SS would even be better imo