BF Mods by Custom-Classic
- Thread starter custom-classic
- Start date
- th_trl_thread_readers 0
- Status
Iffn it ever needs freshenin' up, I knowa guy
DOOOO ITTTTT!!!!!!
Have you tried the NoName NoToy? I hear amazing things. The chalice is still my number one for mtl. Vapinart has them in the has but dot mod has the notoy a lot cheaper even with international shipping you save $35-40. Look at the air flow. Three holes under the coild. Settings to Unleash 1/2 or all three You can get an 18-21 beauty ring if you desire it. I see no need.
Its a shame you sold given they are sending out the reducers. I find that almost all modern atomizers need them as there is the faulty belief that closing airflow is good enough and the market has trended toward ling hits. You can get some ptfe off amazon or ebay (don't get flourotherm the melting point is much lower) .
The target inner diameter fir single coil
Is 1.5-2mm so I keep some 3od 2 id on hand and am just getting in some 3od 1.5id and 4mm od 2 mm id. As you get a meter or two for
€£$5 you are set for the foreseeable future. Just be sure to label then if you're getting multiple sizes as they seldom arrive labelled
Even though the melt point if ptfe is likely higher than exposure would ever be i dont fancy vaping by any plastic when avoidable. I sourced some 304ss tubing with od 3mm and id 2mm as that is the most common so far and a small hand saw witj which to cut it.
Providing i have success cutting 5-10mm sections and csn give them a good cleaning and slight polish i should be happy to send out some Appropriately Sized 304ss inserts to anyone here requiring them. Ideally you'll have previously cut and used ptfe tubing to confirm both the advantage and exact length requirement. Assuming my own success I'm happy to drop a couple in a standard snail mail
Envelope and anyone should feel free to send me a pm. Ill have the 304 tubing in another week
Or so and post here again upon successful creation if my custom reducer tubes. Then you can let me know if anyone wants some. I believe im getting something like three feet of tubing as a minimum order so i shouldn't run out soon given the length if most applications and assuming i don't destroy the majority trying ti cut it so
Small.
Now back to vaping. Plus it rained tkday which gave us the shockingly low and unseasonable temperature under 90F. She cant take it.
To reiterate there is likely no issue at all using ptfe for air floe reducers and every mtl vaper should get some in hand with od3 id2 mm. Its $5-8 and solces a lot of issues with modern atomizers.
If you ever used a Taifun gt2 the reducer for their center air flow Is ptfe
Im only making ss ones as a more permanent solution and because I am particular about avoiding plastic. Ptfe is food safe. And has a melting Point well above 400F which can be seen by googling ptfe melting point. In don't want anyone believing I said ptfe is going to give you cancer or something.
Last edited:
She's all tuckered out...
Omg. Man after my own heart. Wow. He/she is adorable. And the great work above js adorable too lol
And here I was thinking i shouldn't pollute the thread with my baby but was too happy not
To.
Awesome!! So cute.
Btw. What atomizer are YOU using and are you a lung hitter ? When i buy my next one will you polish the top And brush finish the body? Do you offer multiple Finished like that or is it just one and here you go? Its only I'm sure your finishes are better than mine. Did I see in some
Photos you had brass or copper before ? Late tk the party and whatnot.
That there is the Pancake. It's Ti, so I had to give it a shot. 
And yes, straight lung hitter, these days. This fricken atty is werkin' for me!
Thanks for the build suggestions, Peng!
Perfect, first try!
And yes, straight lung hitter, these days. This fricken atty is werkin' for me!
Thanks for the build suggestions, Peng!
Perfect, first try!
Ok,.....I'ma vape it then....
Wish me luck.....
Slam dunk, indeed!
I cant' believe how hard this Ti is hittin'...
Looks like ol' Ross was onto somethin' with the whole "cross sectional area" bizness...
I cant' believe how hard this Ti is hittin'...
Looks like ol' Ross was onto somethin' with the whole "cross sectional area" bizness...
That there is the Pancake. It's Ti, so I had to give it a shot.
And yes, straight lung hitter, these days. This fricken atty is werkin' for me!
Thanks for the build suggestions, Peng!
Perfect, first try!
I cannot take credit for the coil suggestion. I cannot remember who originally posted that coil setup on FB, so I cannot give credit properly. It worked well for me, so I just shared it with others.
Don't be so modest. 
Perfection, right outta the gate.
That rarely happens with me and new atties...
Perfection, right outta the gate.
That rarely happens with me and new atties...
Page 192.
Good news getting some answers I was looking for.
Found out about a good new atty called the m atty. I'm going to stroll into my local shop and buy a new one.
Cons. Found that the app I'm using chops the pages into two. So there isn't a mere 900 pages. But actually 1800 and you ladies and gents are making more. (Though I'm keeping up)
Sent from my SM-G920P using Tapatalk
Good news getting some answers I was looking for.
Found out about a good new atty called the m atty. I'm going to stroll into my local shop and buy a new one.
Cons. Found that the app I'm using chops the pages into two. So there isn't a mere 900 pages. But actually 1800 and you ladies and gents are making more. (Though I'm keeping up)
Sent from my SM-G920P using Tapatalk
- Status
